1996-June Archives by Thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Mon Jun 3 02:38:44 1996
Ending: Sun Jun 30 20:44:02 1996
Messages: 206

• Tower Block   David C. Patton
• Tower Block   Richard L. King
• 160M vertical   GLENN R. JOHNSON, M.D.
  • 160M vertical   Bill Fisher
• Hello!   Tony Brock-Fisher
• 160M vertical   K7LXC@aol.com
• Hello!   K7LXC@aol.com
  • Hello!   barry
    • Hello!   David Robbins
• Hello!   Tony Brock-Fisher
• Hello!   K7LXC@aol.com
• Hello!   Mark Sihlanick
• Hello!   barry
• Phyllistran   Michauldin@aol.com
• Phyllistran   K7LXC@aol.com
• Field Day 40 Mtr ant   Gary D. Elliott
• rotating mast   William R Liporace
• Field Day 40 Mtr ant   Tony Brock-Fisher
• G-10 Fiberglass   GLENN R. JOHNSON, M.D.
• Hello!   K7LXC@aol.com
• Crank up   Alfred J. Frugoli, KE6BER/1
• Rohn shackles/T-Bars   AA7BG Matt Trott
• TOWER GROUNDING   by way of "Bill Fisher, KM9P"
• 40 Mtr FD Ant   Gary D. Elliott
• Rohn shackles/T-Bars   Tony Brock-Fisher
• Crank up   Alfred J. Frugoli, KE6BER/1
• Removing crankup tower from truck   Dick Dievendorff
• Concrete   Tim S. Ellam
  • Concrete   Keith Morehouse-WB9TIY
• Concrete   K7LXC@aol.com
• Concrete   Tony Brock-Fisher
• Rohn shackles/T-Bars   sawyers
• Re[2]: Crank up   sawyers
• Concrete   sawyers
• Concrete   Tim S. Ellam
• CW Issue/new rig sales   K7LXC@aol.com
• CQ Contest Magazine - FREE   K7LXC@aol.com
• CQ Contest Magazine - FREE   AA7BG Matt Trott
• Grounding Near a Gas Line   Jay Pryor
• 3 versus 4 guys   Natan Huffman
• 2 element, 5-band Gem Quad (10, 12, 15, 17, 20M)   jim funk
• 3 versus 4 guys   K7LXC@aol.com
• 3 versus 4 guys   sawyers
• Excuse me, please.   AA7BG Matt Trott
• Grounding Near a Gas Line   Bill Hider
• Station Building   Bruce (AA8U)
• Test Message   Richard Thorne - WB5M
• [Fwd: Roof Mounted Antenna Farm]   Bruce (AA8U)
• [Fwd: Roof Mounted Antenna Farm]   Richard Thorne - WB5M
• TowerMate   Bill Fisher, KM9P
• Torque arms necessary?   Kris Mraz AA5UO
• Torque arms necessary?   K7LXC@aol.com
  • Torque arms necessary?   Kris Mraz AA5UO
    • Torque arms necessary?   Gary Schwartz
      • Torque arms necessary?   Big Don
      • Torque arms necessary?   Gary Schwartz
• [Fwd: Roof Mounted Antenna Farm]   K7LXC@aol.com
• Torque arms necessary?   K7LXC@aol.com
• hams are not alone with tower problems   Bill Frede
• dropping towers   ken smith
• dropping towers   Bruce (AA8U)
• Gin Pole   Patrick N. Riggins
• dropping towers   Roy Morgan
• Gin Pole   Ed Gilbert
• Gin Pole   K7LXC@aol.com
• 3 versus 4 guys   K7LXC@aol.com
• Rotating Tower   Dave_Raymond-CSUS04@email.mot.com
  • Rotating Tower   Jay O'Brien - W6GO
• Rotating Tower   Bruce (AA8U)
• Rotating Tower   David L. Thompson
• Tower Crew Needed   Sid Leach
• Ring Rotators   Chris Swallow
• Rohn Thrust Bearings   Ralph Fedor
• online   Bruce (AA8U)
• Rohn Thrust Bearings   Tony Brock-Fisher
• Rohn Thrust Bearings   K7LXC@aol.com
  • Rohn Thrust Bearings   Kris Mraz AA5UO
  • Rohn Thrust Bearings   Jim Hollenback
• Loaded tower for lowband   Torfinn Utne
• Thrust bearings   Gary Nieborsky
• 160 Meters   Lee Buller
• Delta Loop   Gary D. Elliott
• Rotating Tower   David & Barbara Leeson
• Bolt Book   David & Barbara Leeson
• EZWAY TOWER   Ron Goldstein
• Thrust bearings   Pete Smith
• Delta Loop   Tony Brock-Fisher
• Rohn Thrust Bearings   John D. Allen
• Delta Loop   Charlie Ocker
• Thrust bearings   K8DO@aol.com
• side mounts   Gary Nieborsky
• unscribe   Stanley Barczak
• 3 versus 4 guys   Stan Griffiths
• Masts and stacking considerations   Tony Brock-Fisher
• Masts and stacking considerations   Bryan Sparrowhawk
  • Masts and stacking considerations   Del Seay
  • Masts and stacking considerations   Floyd Gerald
• Masts and stacking considerations   K7LXC@aol.com
  • Masts and stacking considerations   barry
  • 40-2CD and modelling in EZNEC?   Walt Kornienko
• Masts and stacking considerations   Tony Brock-Fisher
• Masts and stacking considerations   a. kerner
  • Masts and stacking considerations   Kris Mraz AA5UO
• side mounts   Gary Nieborsky
• cleaning aluminum wire?   Robert Hill
• Physical size of Rohn towers ?   Tom Rune Lauknes
• LM-470   PAUL M. PLAYFORD
• Masts and stacking considerations   Stan Griffiths
• Masts and stacking considerations   Stan Griffiths
• Tower and antenna info please   K8MBH@aol.com
• HY-GAIN ROTOR   Frank Donovan
• antennas and feedline   jrob@epix.net
• "Ugly-as-L" DXpedition Antenna   Bruce (AA8U)
• side mounts   Mark Sihlanick
• 40-2CD and modelling in EZNEC?   Mark Sihlanick
• antennas and feedline   ken smith
• HY-GAIN ROTOR   Frank Donovan
• MA-550 Tower Installation   Lanny Rathert
• Sommer XP707/807 information   K8MBH@aol.com
• MA-550 Tower Installation   Lanny Rathert
• Tower and antenna info please   Stan Griffiths
• Guy Wire questions   Charlie Ocker
• TopBand: "Ugly-as-L" DXpedition Antenna   Bruce (AA8U)
• MA-550 Tower Installation   Lanny Rathert
• Guy Wire questions   K7LXC@aol.com
  • Guy Wire questions   Mike Bragassa, AA5NK:
• Mast support   Chris R. Burger
• Mast support   Kris Mraz AA5UO
  • K6RR Concentric Mast Design (was: Mast support)   Frank Donovan
• Guy Wire questions   Gary Nieborsky
• Guy Wire questions   K7LXC@aol.com
  • Guy Wire questions   Del Seay
• strandvise clamps   David Clemons
• Guy Wire questions   Glenn D. O'Donnell
• Mast support   Glenn D. O'Donnell
• Removing Potting Compound   Bill Fisher, KM9P
• Big, heavy mast   K7LXC@aol.com
• Insulated Guys   Roger D. Johnson
  • Insulated Guys   John A. Ross, IV
• Tower pictures wanted!   gaetano.piscopo@pixel.stt.it
• New Thread   K7LXC@aol.com
• Rotator info wanted   K7LXC@aol.com
• QUESTION   K7LXC@aol.com
  • Tensioning guys & keeping plumb   Walt Kornienko
• Co-locating hf yagi and sat antennas   Eric Rosenberg
• Big, heavy mast   David L. Thompson
• Rotor Information   grhosler1@mmm.com
• Antenna Erection   grhosler1@mmm.com
• Rotator info wanted   Dave LeDuc
• Big, heavy mast   sawyers
• Big, heavy mast   K7LXC@aol.com
• More tramming advice   K7LXC@aol.com
• Antenna Erection   K7LXC@aol.com
• Guy Wire questions   BK1ZX70SFL@aol.com
• New Thread   Pete Smith
• Ginpole   Steve Zettel
• Tensioning guys & keeping plumb   Steve Zettel
• Guy Wire questions   K7LXC@aol.com
• Ginpole   K7LXC@aol.com
• Tensioning guys & keeping plumb   K7LXC@aol.com
• Tensioning guys & keeping plumb   Tom Lindtveit
• Tramming   David & Barbara Leeson
• tramming etc.   Gary Nieborsky
• Tensioning guys & keeping plumb   K7LXC@aol.com
• Re[4]: Big, heavy mast   sawyers
• Parts for Create rotator box   Dave LeDuc
• tramming etc.   Robert E. Naumann
• Big, heavy mast   Stan Griffiths
• Insulated Guys   Stan Griffiths
• New Thread - Tram line missing link   BK1ZX70SFL@aol.com
• Tramming   Rattmann
• New Thread - Tram line missing link   K7LXC@aol.com
  • New Thread - Tram line missing link   David Robbins
• More tramming advice   Stan Griffiths
• masts   Rich L. Boyd
  • masts   John A. Ross, IV
• Insurance Claim Help   Eric Rosenberg
• Phased Vertical info   Richard Solomon
• Phased Vertical info   Tony Brock-Fisher
• masts   K7LXC@aol.com
• Insurance Claim Help   K7LXC@aol.com
• More tramming advice   K8DO@aol.com
• More tramming advice   K7LXC@aol.com
• Thanks for Insurance Info!   Eric Rosenberg
• Stealthy Antenna Colors   Jay Pryor
• masts   Darrel Van Buer
• HQ-1 MINI-QUAD   Bob Bell
• HQ-1 MINI-QUAD   Tony Brock-Fisher
  • HQ-1 MINI-QUAD   Dick Bodine
    • HQ-1 MINI-QUAD   Gary Schwartz
• HQ-1 MINI-QUAD -Reply   PAT DOYLE
• HQ-1 MINI-QUAD   K7LXC@aol.com
• HQ-1 MINI-QUAD   Bob Bell
• Hygain 52' Crankup - good for me?   Scott Neader
• Hygain 52' Crankup - good for me?   Bill Hider
• Hygain 52' Crankup - good for me?   Bill Hider
• Hygain 52' Crankup - good for me?   JKAHRS@delphi.com
• Hygain 52' Crankup - good for me?   Robert E. Naumann
  • Hygain 52' Crankup - good for me?   Del & Jan Seay
• DSP Box (JPS NIR-10)   Gary D. Elliott
• yaesu g-xxxx rotor control   David Robbins
• Where do I put the rotor?   Tom Wagner
• Where do I put the rotor?   gtaft@voyager.net
• Where do I put the rotor?   Tom Wagner
• Where do I put the rotor?   gtaft@voyager.net
• Ring Rotors   Alberto Perello

Last message date: Sun Jun 30 20:44:02 1996
Archived on: Wed Mar 6 11:48:34 2002

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...