[Amps] Bird 43, Col. Paul E. Cater, 2013/08/31

• Re: [Amps] Bird 43, George Hall, 2013/08/31
• Re: [Amps] Bird 43, Radio WC6W, 2013/08/31
• Re: [Amps] Bird 43, peter chadwick, 2013/08/31

Re: [Amps] What causes arc over on the BeO2 ceramic insulator of an 8877?, peter chadwick, 2013/08/31

• Re: [Amps] What causes arc over on the BeO2 ceramic insulator ofan 8877?, Carl, 2013/08/31

[Amps] New air system socket for 8877 needed, John Farber, 2013/08/30

• Re: [Amps] New air system socket for 8877 needed, Roger (K8RI), 2013/08/30

[Amps] Hole Flow, jim.linda, 2013/08/28

• Re: [Amps] Hole Flow, Fuqua, Bill L, 2013/08/28
  • Re: [Amps] Hole Flow, Roger (K8RI), 2013/08/28
    • Re: [Amps] Hole Flow, Jim Garland, 2013/08/28
    • Re: [Amps] Hole Flow, Paul Christensen, 2013/08/29
    • Re: [Amps] Hole Flow, Bill Turner, 2013/08/29
    • Re: [Amps] Hole Flow, Bill Turner, 2013/08/29
    • Re: [Amps] Hole Flow, Bill Turner, 2013/08/29
• Re: [Amps] Hole Flow, Mike Waters, 2013/08/31
  • Re: [Amps] Hole Flow, Jim Garland, 2013/08/31
    • Re: [Amps] Hole Flow, Al Kozakiewicz, 2013/08/31
    • Re: [Amps] Hole Flow, donroden, 2013/08/31
    • Re: [Amps] Hole Flow, Fuqua, Bill L, 2013/08/31
    • Re: [Amps] Hole Flow, Mike Waters, 2013/08/31

[Amps] Electron HOLE flow, jim.linda, 2013/08/28

• Re: [Amps] Electron HOLE flow, Roger (K8RI), 2013/08/28
  • Re: [Amps] Electron HOLE flow, Bill Turner, 2013/08/28
    • Re: [Amps] Electron HOLE flow, donroden, 2013/08/28
    • Re: [Amps] Electron HOLE flow, Paul Christensen, 2013/08/28
    • Re: [Amps] Electron HOLE flow, Fuqua, Bill L, 2013/08/28
• Re: [Amps] Electron HOLE flow, Mike Waters, 2013/08/28
  • Re: [Amps] Electron HOLE flow, Carl, 2013/08/28
  • Re: [Amps] Electron HOLE flow, Roger (K8RI), 2013/08/28
    • Re: [Amps] Electron HOLE flow, Fuqua, Bill L, 2013/08/28
    • Re: [Amps] Electron HOLE flow, Fuqua, Bill L, 2013/08/28
    • Re: [Amps] Electron HOLE flow, Roger (K8RI), 2013/08/28
    • Message not available
    • [Amps] FW: Electron HOLE flow, Jim Garland, 2013/08/28
    • Re: [Amps] Electron HOLE flow, Bill Turner, 2013/08/29
    • Re: [Amps] Electron HOLE flow, Bill Turner, 2013/08/29
  • Re: [Amps] Electron HOLE flow, Bill Turner, 2013/08/29
• Re: [Amps] Electron HOLE flow, peter chadwick, 2013/08/28
  • Re: [Amps] Electron HOLE flow, Roger (K8RI), 2013/08/28
  • Re: [Amps] Electron HOLE flow, Bill Turner, 2013/08/29
• Re: [Amps] Electron HOLE flow, Mike Waters, 2013/08/31
• Re: [Amps] Electron HOLE flow, Paul Elliott, 2013/08/31

[Amps] why a tube fails ?, Charles Harpole, 2013/08/27

• Re: [Amps] why a tube fails ?, Al Kozakiewicz, 2013/08/27
• Re: [Amps] why a tube fails ?, Jim Garland, 2013/08/27
  • Re: [Amps] why a tube fails ?, Roger (K8RI), 2013/08/28
    • Re: [Amps] why a tube fails ?, k7fm, 2013/08/28
    • Re: [Amps] why a tube fails ?, ---------- JTB ----------, 2013/08/28
• [Amps] why a tube fails ?, Jim Thomson, 2013/08/27
• Re: [Amps] why a tube fails ?, Manfred Mornhinweg, 2013/08/29

[Amps] Fwd: [Antennas] From CO8LY, Joe Giacobello, K2XX, 2013/08/27

• Re: [Amps] Fwd: [Antennas] From CO8LY, Alek Petkovic, 2013/08/27
  • Re: [Amps] Fwd: [Antennas] From CO8LY, Bob - K2KI, 2013/08/28
• Re: [Amps] Fwd: [Antennas] From CO8LY, Alek Petkovic, 2013/08/28

[Amps] AL-1200 and RTTY - JUST A SIMPLE ANSWER PLEASE!, Tony Brock-Fisher, 2013/08/27

• Re: [Amps] AL-1200 and RTTY - JUST A SIMPLE ANSWER PLEASE!, Carl, 2013/08/27
• Re: [Amps] AL-1200 and RTTY - JUST A SIMPLE ANSWER PLEASE!, Louis Parascondola, 2013/08/27
  • Re: [Amps] AL-1200 and RTTY - JUST A SIMPLE ANSWER PLEASE!, Carl, 2013/08/27
• Re: [Amps] AL-1200 and RTTY - JUST A SIMPLE ANSWER PLEASE!, Don Jones, 2013/08/27
  • Re: [Amps] AL-1200 and RTTY - JUST A SIMPLE ANSWER PLEASE!, David Jordan, 2013/08/28
    • Re: [Amps] AL-1200 and RTTY - JUST A SIMPLE ANSWER PLEASE!, Carl, 2013/08/28
    • Re: [Amps] AL-1200 and RTTY - JUST A SIMPLE ANSWER PLEASE!, Mike, 2013/08/28
    • Re: [Amps] AL-1200 and RTTY - JUST A SIMPLE ANSWER PLEASE!, Roger (K8RI), 2013/08/28
• [Amps] AL-1200 and RTTY - JUST A SIMPLE ANSWER PLEASE!, Jim Thomson, 2013/08/27
  • Re: [Amps] AL-1200 and RTTY - JUST A SIMPLE ANSWER PLEASE!, Louis Parascondola, 2013/08/28
• [Amps] AL-1200 and RTTY - JUST A SIMPLE ANSWER PLEASE!, Jim Thomson, 2013/08/28
  • Re: [Amps] AL-1200 and RTTY - JUST A SIMPLE ANSWER PLEASE!, Jim W7RY, 2013/08/28
    • Re: [Amps] AL-1200 and RTTY - JUST A SIMPLE ANSWER PLEASE!, Louis Parascondola, 2013/08/28
    • Re: [Amps] AL-1200 and RTTY - JUST A SIMPLE ANSWER PLEASE!, Bill Turner, 2013/08/29
• [Amps] AL-1200 and RTTY - JUST A SIMPLE ANSWER PLEASE!, Jim Thomson, 2013/08/28

Re: [Amps] Amps Digest, Vol 128, Issue 25, John Farber, 2013/08/23

• Re: [Amps] Amps Digest, Vol 128, Issue 25, CHRIS QUARTON, 2013/08/23
• Re: [Amps] Amps Digest, Vol 128, Issue 25, Jim W7RY, 2013/08/23

[Amps] 3cx800 flashover ?, Carel, pc5m, 2013/08/21

• Re: [Amps] 3cx800 flashover ?, Carl, 2013/08/21
• Re: [Amps] 3cx800 flashover ?, Carel, pc5m, 2013/08/21
• Re: [Amps] 3cx800 flashover ?, Carel, pc5m, 2013/08/24
  • Re: [Amps] 3cx800 flashover ?, Carl, 2013/08/24
    • Re: [Amps] 3cx800 flashover ?, Louis Parascondola, 2013/08/24
• Re: [Amps] 3cx800 flashover ?, TexasRF, 2013/08/24

[Amps] GU-74b amp by UX1UX, k3it, 2013/08/16

• Re: [Amps] GU-74b amp by UX1UX, n8de, 2013/08/16
  • Re: [Amps] GU-74b amp by UX1UX, Fortra, 2013/08/16
    • Re: [Amps] GU-74b amp by UX1UX, Louis Parascondola, 2013/08/16
    • Re: [Amps] GU-74b amp by UX1UX, Roger (K8RI), 2013/08/16
    • Re: [Amps] GU-74b amp by UX1UX, Carl, 2013/08/16
    • Re: [Amps] GU-74b amp by UX1UX, Roger, 2013/08/17
  • Re: [Amps] GU-74b amp by UX1UX, Stein-Roar Brobakken, 2013/08/16
    • Re: [Amps] GU-74b amp by UX1UX, k3it, 2013/08/16
• Re: [Amps] GU-74b amp by UX1UX, Bill Turner, 2013/08/16
  • Re: [Amps] GU-74b amp by UX1UX, Alek Petkovic, 2013/08/16
    • Re: [Amps] GU-74b amp by UX1UX, Carl, 2013/08/17
  • Re: [Amps] GU-74b amp by UX1UX, Carl, 2013/08/17
• [Amps] GU-74b amp by UX1UX, Jim Thomson, 2013/08/17

[Amps] Dentron Clipperton L Problem, pcovington ., 2013/08/15

• Re: [Amps] Dentron Clipperton L Problem, Chris Wilson, 2013/08/15
  • Re: [Amps] Dentron Clipperton L Problem, n8de, 2013/08/15

[Amps] Dummy load. Can distilled water be used instead of, Jim Thomson, 2013/08/12

• Re: [Amps] Dummy load. Can distilled water be used instead of, Roger (K8RI), 2013/08/12

[Amps] AL-82 No output on 160m. Resolution, k6xx@juno.com, 2013/08/11

• Re: [Amps] AL-82 No output on 160m. Resolution, Bill Turner, 2013/08/12
  • Re: [Amps] AL-82 No output on 160m. Resolution, Alek Petkovic, 2013/08/12

Re: [Amps] Dummy load. Can distilled water be used instead of oil ?, peter chadwick, 2013/08/11

• Re: [Amps] Dummy load. Can distilled water be used instead of oil ?, Bryan Swadener, 2013/08/11
• [Amps] Dummy load. Can distilled water be used instead of Oil ?, Jim Thomson, 2013/08/15

[Amps] Dummy load. Can distilled water be used instead of oil ?, Jim Thomson, 2013/08/11

• Re: [Amps] Dummy load. Can distilled water be used instead of oil ?, Chris Wilson, 2013/08/11
  • Re: [Amps] Dummy load. Can distilled water be used instead of oil ?, Chris Wilson, 2013/08/11
    • Re: [Amps] Dummy load. Can distilled water be used instead of oil ?, Richard Solomon, 2013/08/11
• Re: [Amps] Dummy load. Can distilled water be used instead of oil ?, Glen Zook, 2013/08/11
  • Re: [Amps] Dummy load. Can distilled water be used instead of oil ?, David Kirkby, 2013/08/11
• Re: [Amps] Dummy load. Can distilled water be used instead of oil ?, Bill Turner, 2013/08/11
• Re: [Amps] Dummy load. Can distilled water be used instead of oil ?, KA4INM, 2013/08/11
• Re: [Amps] Dummy load. Can distilled water be used instead of oil ?, Carl, 2013/08/11
  • Re: [Amps] Dummy load. Can distilled water be used instead of oil ?, Paul Christensen, 2013/08/11
  • Re: [Amps] Dummy load. Can distilled water be used instead of oil ?, Jim Thomson, 2013/08/11

[Amps] L4B connector, TexasRF, 2013/08/08

• Re: [Amps] L4B connector, Jim W7RY, 2013/08/10
  • Re: [Amps] L4B connector, Glen Zook, 2013/08/11
• Re: [Amps] L4B connector, hrd998cc, 2013/08/10
  • Re: [Amps] L4B connector, Dave Gow, 2013/08/11
    • Re: [Amps] L4B connector, Richard Solomon, 2013/08/11
• [Amps] L4B Connector, Edwin Karl, 2013/08/11
  • Re: [Amps] L4B Connector, Glen Zook, 2013/08/11
• [Amps] L4B connector, Jim Thomson, 2013/08/12

[Amps] NFB vs IMD question, Jim Thomson, 2013/08/07

• Re: [Amps] NFB vs IMD question, Larry Benko, 2013/08/08
• Re: [Amps] NFB vs IMD question, Gary Schafer, 2013/08/08
  • Re: [Amps] NFB vs IMD question, Jim Thomson, 2013/08/08

[Amps] OTA TV, Roger Parsons, 2013/08/05

• Re: [Amps] OTA TV, donroden, 2013/08/05

[Amps] Bird Termaline 694 Wattmeter Query, w2cqm@juno.com, 2013/08/04

• Re: [Amps] Bird Termaline 694 Wattmeter Query, Jim Smith, 2013/08/05

Re: [Amps] OTA TV, peter chadwick, 2013/08/04

• Re: [Amps] OTA TV, peter chadwick, 2013/08/05
• [Amps] OTA TV, Ed K0KL, 2013/08/05
  • Re: [Amps] OTA TV, Richard Solomon, 2013/08/05

[Amps] Shortwave Returns? [Was: testing the biggest one], Jim Thomson, 2013/08/02

• Re: [Amps] Shortwave Returns? [Was: testing the biggest one], peter chadwick, 2013/08/03
  • Re: [Amps] Shortwave Returns? [Was: testing the biggest one], Eddy Swynar, 2013/08/03
  • Re: [Amps] Shortwave Returns? [Was: testing the biggest one], Karl-Arne Markström, 2013/08/03
• [Amps] Shortwave Returns? [Was: testing the biggest one], Jim Thomson, 2013/08/03
  • [Amps] OTA TV, donroden, 2013/08/03
    • Re: [Amps] OTA TV, Fuqua, Bill L, 2013/08/04
    • Re: [Amps] OTA TV, Bill Turner, 2013/08/04
    • Re: [Amps] OTA TV, BJ VOUTE, 2013/08/05
    • Re: [Amps] OTA TV, Jim Brown, 2013/08/05
    • Re: [Amps] OTA TV, donroden, 2013/08/05
    • Re: [Amps] OTA TV, N1BUG, 2013/08/05
    • Re: [Amps] OTA TV, Roger (K8RI), 2013/08/05
    • Re: [Amps] OTA TV, Gary \"Joe\" Mayfield, 2013/08/05
  • Re: [Amps] Shortwave Returns? [Was: testing the biggest one], Richard Solomon, 2013/08/03
  • Re: [Amps] Shortwave Returns? [Was: testing the biggest one], Jim Brown, 2013/08/05
• Re: [Amps] Shortwave Returns? [Was: testing the biggest one], peter chadwick, 2013/08/03

[Amps] testing the biggest one, John Lyles, 2013/08/02

• Re: [Amps] testing the biggest one, Bill Turner, 2013/08/02
  • Re: [Amps] testing the biggest one, Roger (K8RI), 2013/08/02
    • Re: [Amps] Shortwave Returns? [Was: testing the biggest one], qrv@kd4e.com, 2013/08/02
    • Re: [Amps] Shortwave Returns? [Was: testing the biggest one], Carl, 2013/08/02
    • Re: [Amps] Shortwave Returns? [Was: testing the biggest one], Fuqua, Bill L, 2013/08/03
    • Re: [Amps] Shortwave Returns? [Was: testing the biggest one], Djordan (personal), 2013/08/03
    • Re: [Amps] Shortwave Returns? [Was: testing the biggest one], Richard Solomon, 2013/08/03
    • Re: [Amps] Shortwave Returns? [Was: testing the biggest one], Paul Baldock, 2013/08/03
    • Re: [Amps] Shortwave Returns? [Was: testing the biggest one], Djordan (personal), 2013/08/03
    • Re: [Amps] Shortwave Returns? [Was: testing the biggest one], qrv@kd4e.com, 2013/08/03
    • Re: [Amps] Shortwave Returns? [Was: testing the biggest one], David Jordan, 2013/08/03
    • Re: [Amps] Shortwave Returns? [Was: testing the biggest one], donroden, 2013/08/03
    • Re: [Amps] Shortwave Returns? [Was: testing the biggest one], qrv@kd4e.com, 2013/08/03
    • Re: [Amps] testing the biggest one, Bill Turner, 2013/08/02
    • Re: [Amps] testing the biggest one, qrv@kd4e.com, 2013/08/02
    • Re: [Amps] testing the biggest one, Jeff Blaine, 2013/08/02
    • Re: [Amps] testing the biggest one, Bill Turner, 2013/08/02
• Re: [Amps] testing the biggest one, Mike Manship, 2013/08/02
  • Re: [Amps] testing the biggest one, Jeff Blaine, 2013/08/02
• Re: [Amps] testing the biggest one, donroden, 2013/08/02
• [Amps] testing the biggest one, Jim Thomson, 2013/08/03
• [Amps] testing the biggest one, Jim Thomson, 2013/08/03

[Amps] What is the going rate for YC156s / what have people paid for them?, David Kirkby, 2013/08/01

• Re: [Amps] What is the going rate for YC156s / what have people paidfor them?, Carl, 2013/08/01
  • Re: [Amps] What is the going rate for YC156s / what have people paidfor them?, Dr. David Kirkby, 2013/08/06
• Re: [Amps] What is the going rate for YC156s / what have people paidfor them?, Jeff Blaine, 2013/08/01
  • Re: [Amps] What is the going rate for YC156s / what have people paidfor them?, Dr. David Kirkby, 2013/08/06
• Re: [Amps] What is the going rate for YC156s / what have people paidfor them?, Harald, 2013/08/01