December 2005 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Thu Dec 1 03:11:21 EST 2005
Ending: Sat Dec 31 23:58:55 EST 2005
Messages: 417

• [Amps] Why preference for 3CPX800A7?   Ian White GM3SEK
• [Amps] Pop (arc) noise in Alpha 99   Ian White GM3SEK
• [Amps] Mica Resource   aborg
• [Amps] Diode RCA #99250-162   Mike
• [Amps] B&W FC-30 RFC   Angelo Karabetsos
  • [Amps] B&W FC-30 RFC   Mike McCarthy, W1NR
    • [Amps] B&W FC-30 RFC   Michael J. Clarson
  • [Amps] B&W FC-30 RFC   Alek Petkovic
• [Amps] SELL: Amplifier Components   w2cqm at juno.com
• [Amps] B&W FC-30 RFC   Angelo Karabetsos
• [Amps] B&W FC-30 RFC   Carcia, Francis A HS
• [Amps] FC-30 Choke   AA6DX - Mark
  • [Amps] FC-30 Choke   Phil Clements
• [Amps] FS - MLA-1200 Amplifier   Don Havlicek
• [Amps] 4K Ultra Restoration   Bob Maser
  • [Amps] 4K Ultra Restoration   Dave, K2DP
  • [Amps] 4K Ultra Restoration   Ron Spencer
  • [Amps] 4K Ultra Restoration   K6QD
  • [Amps] 4K Ultra Restoration   Phil Clements
    • [Amps] 4K Ultra Restoration   Bob Maser
• [Amps] WANTED: 4" EBM Squirrel cage blower   w2cqm at juno.com
• [Amps] WANTED: 230/120VAC Stepdown Transformer   w2cqm at juno.com
• [Amps] Need Vacuum Relay   Jim Brown
  • [Amps] Need Vacuum Relay   PA3DUV
• [Amps] 4K Ultra Restoration   HAROLD B MANDEL
• [Amps] 866 rectifiers   Jason Buchanan
  • [Amps] 866 rectifiers   Barrie Smith
  • [Amps] 866 rectifiers   Artmouton
    • [Amps] 866 rectifiers   jsb at digistar.com
  • [Amps] 866 rectifiers   m.ford
• [Amps] difference between 2,3,4 and 43, 45, ... materials?   Bert
• [Amps] IC 2KL 10/12m mod kit   Morel 4X1AD
• [Amps] Alpha 87a and DAS   Ron Todd
• [Amps] FC-30 Choke   Carcia, Francis A HS
  • [Amps] FC-30 Choke   Angelo Karabetsos
    • [Amps] FC-30 Choke   R.Measures
• [Amps] feed thru caps   Partain, Chuck
• [Amps] FS Ameritron Amp   Don Havlicek
• [Amps] IC 2KL 10/12m mod kit   Punderson, IV, James
• [Amps] FL-21200B   Alek Petkovic
  • [Amps] FL-21200B   Vic K2VCO
    • [Amps] FL-21200B   R.Measures
• [Amps] FL-21200B   Peter Chadwick
  • [Amps] FL-21200B   Alek Petkovic
    • [Amps] FL-21200B   R.Measures
      • [Amps] FL-21200B   k7fm
  • [Amps] FL-21200B   R.Measures
• [Amps] 866 rectifiers   Rich
• [Amps] how to connect 8405a probes ?   Dan Sawyer
• [Amps] Valiant   Tom Martin
  • [Amps] Valiant   bob finger
• [Amps] 8877 grid current going negative etc   almacottage
• [Amps] G3SEK Kits Back in Stock Soon   Tom Hix
• [Amps] Heathkit HA-202 2 meter amplifier mod for 6 meters   TChesek at Epix.Net
• [Amps] 4K-Ultra Restoration   Bob Maser
  • [Amps] 4K-Ultra Restoration   John- W4DJ
  • [Amps] 4K-Ultra Restoration   Bill Turner
  • [Amps] 4K-Ultra Restoration   Gary Smith
• [Amps] FL-2100B Fixed   Alek Petkovic
  • [Amps] FL-2100B Fixed   Will Matney
    • [Amps] FL-2100B Fixed   R.Measures
  • [Amps] Centurion   Henry Pfizenmayer
    • [Amps] Centurion   Henry Pfizenmayer
• [Amps] 8877 grid current going negative etc   Andy Cook, G4PIQ
• [Amps] WANTED: Matched Set of Square 1ma Meters   w2cqm at juno.com
• [Amps] FC-30 Choke   Angelo Karabetsos
  • [Amps] FC-30 Choke   R.Measures
    • [Amps] FC-30 Choke   Angelo Karabetsos
• [Amps] Alpha 78 on 17 Meters   Frank N. Haas
  • [Amps] Alpha 78 on 17 Meters   Michael Tope
    • [Amps] Alpha 78 on 17 Meters   Kenneth D. Grimm, K4XL
• [Amps] FC-30 Choke   Carcia, Francis A HS
• [Amps] viable HV PS electrolytics   Larry N. Carman
  • [Amps] viable HV PS electrolytics   jsb at digistar.com
    • [Amps] viable HV PS electrolytics   Paul Whatton
• [Amps] 4K Ultra Restoration   Bob Maser
  • [Amps] 4K Ultra Restoration   Larry N. Carman
  • [Amps] 4K Ultra Restoration   Gary Smith
• [Amps] 4K-Ultra Restoration   Bob Maser
  • [Amps] 4K-Ultra Restoration   Keith Dutson
• [Amps] viable HV PS electrolytics   Jim Kearman
• [Amps] 4K Ultra Restoration   Larry N. Carman
• [Amps] Need SK306 Chimney   9plus
• [Amps] Amps Digest, Vol 36, Issue 9   K3vw at aol.com
• [Amps] Amps Digest, Vol 36, Issue 10   K3vw at aol.com
• [Amps] FOR SALE   Larry Emery
• [Amps] Fw: 4K Ultra Restoration   m.ford
• [Amps] Henry 4 K-2 SWR   Bud Governale
  • [Amps] Henry 4 K-2 SWR   Mike Schatzberg
    • [Amps] Henry 4 K-2 SWR   R.Measures
  • [Amps] Henry 4 K-2 SWR   Phil Clements
• [Amps] Alpha 78 on 17 Meters - SUCCESS!   Frank N. Haas
• [Amps] Want to trade   RICHARD GEORGE
• [Amps] Alpha Amplifier Parts   Bob Sullivan
• [Amps] Wanted: Small Variac 220VAC 2-3amps   w2cqm at juno.com
• [Amps] Henry 4 K-2 SWR   TexasRF at aol.com
  • [Amps] Need knob   k0dan
• [Amps] Henry 4 K-2 SWR   K8MLM at aol.com
• [Amps] Henry 4K-Ultra Restoration   Bob Maser
• [Amps] SELL: Hallicrafters 32B   w2cqm at juno.com
• [Amps] SELL: Atlas Radio Mobile Antenna Tuner   w2cqm at juno.com
• [Amps] Henry 4K-Ultra   Bob Maser
• [Amps] help diagnosing a bad 8450a probe ?   Dan Sawyer
  • [Amps] help diagnosing a bad 8450a probe ?   Steve Thompson
    • [Amps] help diagnosing a bad 8450a probe ?   Dan Sawyer
      • [Amps] help diagnosing a bad 8450a probe ?   Steve Thompson
      • [Amps] help diagnosing a bad 8450a probe ?   Alex Eban
• [Amps] help diagnosing a bad 8450a probe ?   Peter Chadwick
  • [Amps] help diagnosing a bad 8450a probe ?   Dan Sawyer
• [Amps] help diagnosing a bad 8450a probe ?   Carcia, Francis A HS
• [Amps] help diagnosing a bad 8450a probe ?   Peter Chadwick
• [Amps] Seeking small air variables...   wc6w at juno.com
• [Amps] small air variables   Roy Koeppe
• [Amps] L7 question   ec1cwg at dxhunters.com
• [Amps] FC-50 Choke   Ronald Smith
• [Amps] Ouch - 23 Ohms ?   Dan Sawyer
  • [Amps] Ouch - 23 Ohms ?   David Kirkby
    • [Amps] Ouch - 23 Ohms ?   Dan Sawyer
      • [Amps] Ouch - 23 Ohms ?   Karl-Arne Markström
      • [Amps] Ouch - 23 Ohms ?   Dr. David Kirkby
      • [Amps] Ouch - 23 Ohms ?   Dan Sawyer
• [Amps] Socket Care and feeding   w6ah at comcast.net
• [Amps] variety of useful info   Larry N. Carman
• [Amps] Henry 4K-Ultra   Bob Maser
• [Amps] Input circuits   Osten B Magnusson
• [Amps] Ouch - 23 Ohms ?   Dan Sawyer
  • [Amps] Ouch - 23 Ohms ?   Dr. David Kirkby
• [Amps] Emtron DX4 power supply pics   PA3DUV
• [Amps] Henry 4K-Ultra   Bob Maser
• [Amps] 8950 tubes   Rocky Clayton
• [Amps] Emailing: hf_millinium   Rocky Clayton
  • [Amps] Emailing: hf_millinium   Keith Dutson
  • [Amps] Emailing: hf_millinium   Vic K2VCO
    • [Amps] Emailing: hf_millinium   Larry N. Carman
    • [Amps] Emailing: hf_millinium   m.ford
    • [Amps] Emailing: hf_millinium   jsb at digistar.com
  • [Amps] Emailing: hf_millinium   Marc Wullaert
  • [Amps] Emailing: hf_millinium   W0UN -- John Brosnahan
• [Amps] Emailing: Heathkit-Chippewa-KL-1-LInear-amplifier-Museum-Quality_W0QQitemZ5838771499QQcategoryZ48700QQrdZ1QQcmdZViewItem   Rocky Clayton
  • [Amps] Emailing:Heathkit-Chippewa-KL-1-LInear-amplifier-Museum-Quality_W0QQitemZ5838771499QQcategoryZ48700QQrdZ1QQcmdZViewItem   TChesek at Epix.Net
• [Amps] WANTED: 220VAC Variac 2-5amps   w2cqm at juno.com
• [Amps] Emailing: hf_millinium   Jim Kearman
• [Amps] Emailing: hf_millinium   HAROLD B MANDEL
• [Amps] SELL: Heath Related Compnents   w2cqm at juno.com
• [Amps] Heathkit Meters   aborg
• [Amps] Help on tuning Henry 2002A & 2004A VHF Amps   k9mk at flash.net
• [Amps] Polishing Aluminum Panels   Jack M. Henkle
  • [Amps] Polishing Aluminum Panels   J. Hector Garcia XE2K
  • [Amps] Polishing Aluminum Panels   Theo Bellamy
• [Amps] Emailing: hf_millinium   Tim G. Brresen
  • [Amps] RE : Emailing: hf_millinium   hermans
• [Amps] oil filled capacitor needed, 4000 working DC volts   Larry N. Carman
• [Amps] THANKS!   Osten B Magnusson
• [Amps] Antenna traps   Gene Bigham
  • [Amps] Antenna traps   Vic K2VCO
    • [Amps] Antenna traps   Gene Bigham
  • [Amps] Antenna traps   Osten B Magnusson
    • [Amps] Antenna traps   Joe Isabella
  • [Amps] Antenna traps   Gary Smith
  • [Amps] Antenna traps   Bill Turner
    • [Amps] Antenna traps   Jim Brown
      • [Amps] Antenna traps   R.Measures
• [Amps] Help with first project (4-1000A ???)   Edward Foltyn
• [Amps] Anyone ever built a 4CX1500 amp after OZ9ZI ?   Patrick Egloff
  • [Amps] Anyone ever built a 4CX1500 amp after OZ9ZI ?   Peter Voelpel
• [Amps] Designing the Cleanest Linear with RF Negative Feedback   Tom Cathey
  • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Jan Erik Holm
  • [Amps] Designing the Cleanest Linear with RF Negative Feedback   kenw2dtc
  • [Amps] Designing the Cleanest Linear with RF Negative Feedback   R.Measures
  • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Tom Cathey
• [Amps] Designing the Cleanest Linear with RF Negative Feedback   TexasRF at aol.com
  • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Keith Dutson
• [Amps] Amps Digest, Vol 36, Issue 23   Steve Gehring
  • [Amps] Amps Digest, Vol 36, Issue 23   Steve Thompson
• [Amps] LK 500ZC Tuning problem   John Wagner
• [Amps] Designing the Cleanest Linear with RF Negative Feedback   TexasRF at aol.com
  • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Tom Cathey
  • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Tom Cathey
    • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Gary Schafer
      • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Tom Cathey
    • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Bill Turner
      • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Gary Schafer
• [Amps] Designing the Cleanest Linear with RF Negative Feedback   Gärdin Petter
• [Amps] Antenna traps   Peter Chadwick
  • [Amps] Antenna traps   R.Measures
• [Amps] Designing the Cleanest Linear with RF Negative Feedback   TexasRF at aol.com
  • [Amps] Lowest distortion required - Was: Designing the Cleanest Linear with RF Negative Feedback   GGLL
  • [Amps] Designing the Cleanest Linear with RF Negative Feedback   R.Measures
    • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Tom Cathey
      • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Vic K2VCO
• [Amps] Designing the Cleanest Linear with RF Negative Feedb ack   Carcia, Francis A HS
• [Amps] Designing the Cleanest Linear with RF Negative Feedback   wc6w at juno.com
  • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Tom Cathey
    • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Gary Schafer
• [Amps] Designing the Cleanest Linear with RF Negative Feedback   wc6w at juno.com
  • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Jim Tonne
• [Amps] Lowest distortion required - Was: Designing the CleanestLinear with RF Negative Feedback   GGLL
• [Amps] *** SPAM *** Re: Antenna traps   Peter Chadwick
  • [Amps] *** SPAM *** Re: Antenna traps   R.Measures
    • [Amps] *** SPAM *** Re: Antenna traps   Steve Thompson
  • [Amps] *** SPAM *** Re: Antenna traps   Ian White GM3SEK
    • [Amps] *** SPAM *** Re: Antenna traps   Steve Thompson
      • [Amps] *** SPAM *** Re: Antenna traps   Ian White GM3SEK
      • [Amps] *** SPAM *** Re: Antenna traps   Steve Thompson
      • [Amps] *** SPAM *** Re: Antenna traps   Ian White GM3SEK
• Re: [Amps] *** SPAM *** Re:  Antenna traps   Peter Chadwick
  • Re: [Amps] *** SPAM *** Re:  Antenna traps   R.Measures
• [Amps] Matching   Steve Thompson
• [Amps] Designing the Cleanest Linear with RF Negative Feedback   wc6w at juno.com
  • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Steve Thompson
  • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Tom Cathey
    • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Gary Schafer
      • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Bill Fuqua
      • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Karl-Arne Markström
      • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Gary Schafer
      • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Steve Thompson
      • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Gary Schafer
      • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Tom Cathey
      • [Amps] Designing the Cleanest Linear with RF Negative Feedback   R.Measures
  • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Tom Cathey
    • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Gary Schafer
    • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Karl-Arne Markström
• [Amps] Racal Dana DMM's   Will Matney
• [Amps] Designing the Cleanest Linear with RF Negative Feedback   w6ah at comcast.net
• [Amps] Filter Cap source   Dennis A. Homerick
  • [Amps] Filter Cap source   Jason Buchanan
• [Amps] Help with first project (4-1000A ???)   w6ah at comcast.net
• [Amps] Matching   Peter Chadwick
  • [Amps] Matching   Steve Thompson
    • [Amps] Matching   Ian White GM3SEK
• [Amps] AL80-A help needed   Jeff Peacock
• [Amps] Designing the Cleanest Linear with RF Negative Feedback   Bill L. Fuqua
  • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Karl-Arne Markström
• [Amps] Designing the Cleanest Linear with RF Negative Feedback   wc6w at juno.com
  • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Tom Cathey
    • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Peter Voelpel
  • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Steve Thompson
  • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Tom Cathey
    • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Steve Thompson
      • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Tom Cathey
      • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Gary Schafer
      • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Tom Cathey
      • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Steve Thompson
      • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Steve Thompson
      • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Gary Schafer
      • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Ian White GM3SEK
      • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Steve Thompson
      • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Ian White GM3SEK
      • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Tom Cathey
      • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Tom Cathey
• [Amps] Help with first project (4-1000A ???)   wc6w at juno.com
• [Amps] hp 8405a mostly working - yea!!   Dan Sawyer
• [Amps] Designing the Cleanest Linear with RF Negative Feedback   w6ah at comcast.net
• Re: [Amps] Designing the Cleanest  Linear with RF Negative   Peter Chadwick
• [Amps] Henry 2K-4, no hi-volt, no filament?   PlanerGuy at aol.com
• [Amps] Need Help build Nonlinear Amplifier   cm215 at greenwich.ac.uk
  • [Amps] Need Help build Nonlinear Amplifier   Bill Turner
  • [Amps] Need Help build Nonlinear Amplifier   jeff millar
• [Amps] Designing the Cleanest Linear with RF Negative Feedback   wc6w at juno.com
  • [Amps] Designing the Cleanest Linear with RF Negative Feedback   gdaught6 at stanford.edu
  • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Tom Cathey
    • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Brass Pounder
      • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Dave Calhoun
      • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Will Matney
      • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Larry N. Carman
      • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Tom Cathey
      • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Peter Voelpel
      • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Tom Cathey
    • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Gary Schafer
• [Amps] SELL: Amplifier RF Deck components   w2cqm at juno.com
  • [Amps] SELL: Amplifier RF Deck components   Brass Pounder
• [Amps] Designing the Cleanest Linear with RF Negative Feedback   wc6w at juno.com
• [Amps] Designing the Cleanest Linear with RF Negative Feedback   Bill L. Fuqua
• [Amps] Designing the Cleanest Linear with RF Negative Feedback   wc6w at juno.com
  • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Tom Cathey
    • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Karl-Arne Markström
      • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Tom Cathey
• [Amps] Designing the Cleanest Linear with RF Negative Feedb ack   Carcia, Francis A HS
• [Amps] Difference between Henry 2k and 3k?   john
  • [Amps] Difference between Henry 2k and 3k?   Theo Bellamy
  • [Amps] Difference between Henry 2k and 3k?   Steven Cook
    • [Amps] Difference between Henry 2k and 3k?   john
      • [Amps] Difference between Henry 2k and 3k?   Joe Isabella
• [Amps] Designing the Cleanest Linear with RF Negative Feedback   wc6w at juno.com
  • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Tom Cathey
    • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Steve Thompson
      • [Amps] Designing the Cleanest Linear with RF Negative Feedback   R.Measures
• [Amps] Ohmite thick-film resistor L measurement   R.Measures
  • [Amps] Ohmite thick-film resistor L measurement   Vic K2VCO
• [Amps] 8405a setup question?   Dan Sawyer
• [Amps] Matching   wc6w at juno.com
• [Amps] Emtron DX4 tank circuit details   PA3DUV
• [Amps] Difference 2K and 3K   Gene Bigham
• [Amps] Henry 2 K Classic X   Gene Bigham
• [Amps] Henry 8K   Richard Carey
• [Amps] Henry Differences - 2K-3 VS 2K-4   AA6DX - Mark
• [Amps] Looking for a 100 MHz+ Op Amp   cm215 at greenwich.ac.uk
• [Amps] Looking for a 100 MHz+ Op Amp   wc6w at juno.com
  • [Amps] looking for amp builders   ON4IQ
• [Amps] Ohmite thick-film resistor L measurement   Dave Haupt
  • [Amps] RE : Ohmite thick-film resistor L measurement   hermans
• [Amps] Henry 8K   Richard Carey
• [Amps] Need info   carl s.
• [Amps] Want to use a knob with a 3/8" opening on a 1/4" shaft.   Jack M. Henkle
• [Amps] Want to use a knob with a 3/8" opening on a 1/4" shaft.   HAROLD B MANDEL
  • [Amps] Want to use a knob with a 3/8" opening on a 1/4" shaft.   W0UN -- John Brosnahan
    • [Amps] Want to use a knob with a 3/8" opening on a 1/4" shaft.   Bill Turner
      • [Amps] Want to use a knob with a 3/8" opening on a 1/4" shaft.   Will Matney
      • [Amps] Want to use a knob with a 3/8" opening on a 1/4" shaft.   k7rdx
• [Amps] Want to use a knob with a 3/8" opening on a 1/4" shaft.   HAROLD B MANDEL
• [Amps] Modified W2GN VHF Amplifiers   Byron Tatum
• [Amps] Real Difference   Jim Barron
  • [Amps] Real Difference   Bill Coleman
• [Amps] Does Santa Claus have a junkbox?   wc6w at juno.com
  • [Amps] Does Santa Claus have a junkbox?   Peter Voelpel
• Re: [Amps] Want to use a knob with a 3/8" opening on a 1/4"   shaft.   Peter Chadwick
  • Re: [Amps] Want to use a knob with a 3/8" opening on a 1/4"   shaft.   Gary Smith
• [Amps] Is this info still accurate?   S57AD Mirko Sibilja
  • [Amps] Is this info still accurate?   Mirko Sibilja
• [Amps] Wanted: Tune / Load knob for Henry 2k Classic   Rich Hallman - N7TR
• [Amps] Want to use a knob with a 3/8" opening on a 1/4" shaft.   Will Matney
  • [Amps] Want to use a knob with a 3/8" opening on a 1/4" shaft.   Bill Turner
• [Amps] Rifle boring   Will Matney
• [Amps] L4B Interlock question   Mark
• [Amps] Ameritron AL-811 (3 tube model)   jsb at digistar.com
  • [Amps] Ameritron AL-811 (3 tube model)   Joe Isabella
  • [Amps] Ameritron AL-811 (3 tube model)   R.Measures
• [Amps] Want to use a knob with a 3/8" opening on a 1/4" shaft.   Will Matney
• [Amps] HF-2500DX Has time told the story? ? ?   Robert Chudek
• [Amps] 4-250a mounting   James Horne
  • [Amps] 4-250a mounting   k7fm
  • [Amps] 4-250a mounting   W.F van Wyk
• [Amps] 4-250a mounting   Peter Chadwick
  • [Amps] 4-250a mounting   R.Measures
  • [Amps] 4-250a mounting   Bob Sullivan
• [Amps] xmas   carl s.
• [Amps] SVP's   Byron Tatum
  • [Amps] SVP's   Jerry Muller
• [Amps] FW: AL-80b Problem?   Bob Moore
• [Amps] Amps Digest, Vol 36, Issue 48   Tom Martin
• [Amps] Amps Digest, Vol 36, Issue 48   K3vw at aol.com
• [Amps] Software for noise figure meters.   Dr. David Kirkby
• [Amps] Henry 4K Ultra   Bob Maser
  • [Amps] Henry 4K Ultra - Military SErvice Manual ?   Dave, K2DP
    • [Amps] Henry 4K Ultra - Military SErvice Manual ?   Joe Isabella
• [Amps] Henry 4K Ultra - Military SErvice Manual ?   K8MLM at aol.com
• [Amps] Designing the Cleanest Linear with RF Negative Feedback   w6ah at comcast.net
  • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Tom Cathey
• [Amps] ?Bargain? Transformer Connections   LKBrownMD at cs.com
• [Amps] ?Bargain? Transformer Connections   TexasRF at aol.com
• [Amps] Designing the Cleanest Linear with RF Negative Feedback   wc6w at juno.com
  • [Amps] Designing the Cleanest Linear with RF Negative Feedback   Tom Cathey
• [Amps] Titan Fan   Marv Gonsior
• [Amps] Purpose of cathode resistor?   Bill Turner
  • [Amps] Purpose of cathode resistor?   Vic K2VCO
    • [Amps] Purpose of cathode resistor?   R.Measures
• [Amps] Purpose of cathode resistor?   TexasRF at aol.com
  • [Amps] Purpose of cathode resistor?   Steve Thompson
    • [Amps] Purpose of cathode resistor?   Phil Clements
    • [Amps] Purpose of cathode resistor?   R.Measures
• [Amps] Calibrate a panel meter?   Bill Turner
  • [Amps] Calibrate a panel meter?   k7rdx
  • [Amps] Calibrate a panel meter?   Dr. David Kirkby
  • [Amps] Calibrate a panel meter?   Karl-Arne Markström
  • [Amps] Calibrate a panel meter?   Vic K2VCO
    • [Amps] Calibrate a panel meter?   Karl-Arne Markström
• [Amps] Calibrate a panel meter?   TexasRF at aol.com
• [Amps] Drake L-4B fan - too small and too slow?   Alan Ibbetson
  • [Amps] Drake L-4B fan - too small and too slow?   Phil Clements
  • [Amps] Drake L-4B fan - too small and too slow?   R.Measures
    • [Amps] Drake L-4B fan - too small and too slow?   Gary Smith
  • [Amps] Drake L-4B fan - too small and too slow?   Jason Buchanan
    • [Amps] Drake L-4B fan - too small and too slow?   Jason Buchanan
• [Amps] Calibrate a panel meter?   wc6w at juno.com
  • [Amps] Calibrate a panel meter?   Bill Turner
• [Amps] Aromat relays   Will Matney
• [Amps] Fw: Drake L-4B fan - too small and too slow?   ec1cwg at dxhunters.com
• [Amps] Calibrate a panel meter?   HAROLD B MANDEL
  • [Amps] Calibrate a panel meter?   Bill Turner
• [Amps] Motorola Micor   Herbert Ullmann
• [Amps] Fw: Calibrate a panel meter?   ZL2AAA
• [Amps] Fw: Calibrate a panel meter?   ZL2AAA
• [Amps] TL-922 Repair   Marv Gonsior
• [Amps] Drake L-4B fan - too small and too slow?   Alan Ibbetson
  • [Amps] Drake L-4B fan - too small and too slow?   John
    • [Amps] Drake L-4B fan - too small and too slow?   Jason Buchanan
      • [Amps] Drake L-4B fan - too small and too slow?   John
      • [Amps] Drake L-4B fan - too small and too slow?   R.Measures
      • [Amps] Drake L-4B fan - too small and too slow?   Karl-Arne Markström
      • [Amps] Drake L-4B fan - too small and too slow?   Peter Voelpel
      • [Amps] Drake L-4B fan - too small and too slow?   John
• [Amps] 3cpx5000a7   Chris
• [Amps] 4CX800A/GU74B back in stock   Tom Hix
  • [Amps] WTB: Rotator   Dave Meitzen
• [Amps] Henry transformer?   PlanerGuy at aol.com
  • [Amps] Henry transformer?   Will Matney
• [Amps] Titan 425   Ron Spencer
• [Amps] Titan 425   Ron Spencer
• [Amps] Titan 425   Ron Spencer
• [Amps] color in tubes   Lon W. Cottingham
  • [Amps] color in tubes   R.Measures
    • [Amps] color in tubes   Jan Erik Holm
• [Amps] 3-500zgs   Gene Bigham
  • [Amps] 3-500zgs   Joe Isabella
    • [Amps] 3-500zgs   Jason Buchanan
      • [Amps] 3-500zgs   Joe Isabella
      • [Amps] 3-500zgs   Jason Buchanan
• [Amps] Happy new year!   GGLL
• [Amps] GS-35B Grid Current?   Mike
  • [Amps] GS-35B Grid Current?   Ian White GM3SEK
    • [Amps] GS-35B Grid Current?   Steve Thompson
      • [Amps] GS-35B Grid Current?   Ian White GM3SEK
      • [Amps] GS-35B Grid Current?   Tony King - W4ZT
• [Amps] FS: Bread Slicers   StephenTetorka at cs.com
• [Amps] no rf choke in 30S-1 filament/cathode circuit   rfdude at comcast.net
• [Amps] ORC Transformer   LKBrownMD at cs.com
• [Amps] Russian Capacitor   Mike

Last message date: Sat Dec 31 23:58:55 EST 2005
Archived on: Sat Dec 31 23:59:26 EST 2005

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...