Towertalk Mailing List (date)

Towertalk Mailing List (date)

[Thread Index] [Top] [All Lists]

January 31, 2013

Re: [TowerTalk] Caps (was: Hose Clamps), K8RI, 23:46
[TowerTalk] 1/8 x 3/16 bolts for capacitor, Stein-Roar Brobakken, 22:29
Re: [TowerTalk] Caps, john, 22:14
Re: [TowerTalk] Antenna Recommendation, SPWoo, 21:06
Re: [TowerTalk] Caps, Bill, 19:55
Re: [TowerTalk] Caps (was: Hose Clamps), john, 19:50
Re: [TowerTalk] Antenna Recommendation, David Gilbert, 19:16
[TowerTalk] M2 7&10-30LP8, Barrie - Yellowstone Photo, 18:35
Re: [TowerTalk] Caps (was: Hose Clamps), n8de, 17:57
Re: [TowerTalk] Caps (was: Hose Clamps), Jerry Gardner, 17:47
Re: [TowerTalk] Caps (was: Hose Clamps), john, 17:35
[TowerTalk] Entry Point for Coax/Cable, rfman45, 17:33
[TowerTalk] Interest in AL-1500 linear, Rex Lint, 16:04
Re: [TowerTalk] Antenna Recommendation, Jack White, 15:36
Re: [TowerTalk] Antenna Recommendation, Greg, 15:18
Re: [TowerTalk] Antenna Recommendation, Todd Coulter, 15:14
Re: [TowerTalk] Antenna Recommendation, David Jordan, 14:42
Re: [TowerTalk] Antenna Recommendation, David Blake, 14:06
Re: [TowerTalk] Refitting existing concrete base, Wes Attaway \(N5WA\), 14:05
Re: [TowerTalk] Trylon self supporting tower 80 ft fall report, Wes Attaway \(N5WA\), 13:58
Re: [TowerTalk] Refitting existing concrete base, Larry Loen, 13:57
Re: [TowerTalk] Refitting existing concrete base, Patrick Greenlee, 13:49
[TowerTalk] Trylon self supporting tower 80 ft fall report, Jim Thomson, 13:03
Re: [TowerTalk] Hose Clamps, Jerry Gardner, 12:47
[TowerTalk] Refitting existing concrete base, Jack Berry, 12:43
Re: [TowerTalk] Entry Point for Coax/Cable, Jim Brown, 12:42
Re: [TowerTalk] Entry Point for Coax/Cable, Frank, 12:24
Re: [TowerTalk] Antenna Recommendation, Richard Solomon, 11:55
Re: [TowerTalk] Antenna Recommendation, K7LXC, 11:44
Re: [TowerTalk] Antenna Recommendation, Larry Loen, 11:18
Re: [TowerTalk] Entry Point for Coax/Cable, Brian Alsop, 10:19
Re: [TowerTalk] Antenna Recommendation, k6ye, 10:16
Re: [TowerTalk] Entry Point for Coax/Cable, Pete Smith N4ZR, 10:09
Re: [TowerTalk] Trylon self supporting tower 80 ft fall report, Gene Smar, 10:07
Re: [TowerTalk] tower trailers, Larry stowell, 09:46
Re: [TowerTalk] Entry Point for Coax/Cable, David Robbins, 08:20
[TowerTalk] Antenna Recommendation, Roger D Johnson, 08:05
Re: [TowerTalk] Hose Clamps, Patrick Greenlee, 07:54
[TowerTalk] Trylon self supporting tower 80 ft fall report, Charles Harpole, 07:22
[TowerTalk] Tower/antenna question, Michael Goins, 07:22
Re: [TowerTalk] Hose Clamps, n8cc, 07:22
Re: [TowerTalk] Tower trailers?, Grant Saviers, 00:08

January 30, 2013

Re: [TowerTalk] Tower trailers?, Jim Lux, 23:21
[TowerTalk] Tower trailers?, Mike Lyon, 20:05
[TowerTalk] Entry Point for Coax/Cable, rfman45, 19:49
Re: [TowerTalk] WINDS, K1TTT, 18:51
[TowerTalk] WINDS, aa6dx, 17:54
[TowerTalk] TRX-80HD antenna raising fixturee, Marvin Shelton, 09:07
[TowerTalk] TowerTalk hi, Lee Buller, 02:33

January 29, 2013

Re: [TowerTalk] Lube om Hose clamps, Missouri Guy, 22:31
Re: [TowerTalk] Lube om Hose clamps, Jim W7RY, 21:10
[TowerTalk] hose clamps, Spencer, 19:17
Re: [TowerTalk] Lube om Hose clamps, K8RI, 13:52
Re: [TowerTalk] Lube om Hose clamps, K8RI, 13:50
Re: [TowerTalk] Lube om Hose clamps, john, 13:28
Re: [TowerTalk] Lube om Hose clamps, Jim Lux, 11:08
Re: [TowerTalk] Hose Clamps, Wayne Kline, 11:06
Re: [TowerTalk] Lube om Hose clamps, n8de, 10:35
Re: [TowerTalk] Lube om Hose clamps, Jim Lux, 09:57
Re: [TowerTalk] Hose Clamps, Bert Almemo, 09:38
Re: [TowerTalk] Lube om Hose clamps, john, 09:21

January 28, 2013

Re: [TowerTalk] Lightning arrestor (I.C.E 300/U) for SteppIR yagi at tower b, K7LXC, 15:45
[TowerTalk] Lube om Hose clamps, K8RI, 14:46
[TowerTalk] Lightning arrestor (I.C.E 300/U) for SteppIR yagi at tower base or at Shack entry, Andreas Hofmann, 11:11
[TowerTalk] SS Hose Clamps, Kimo Chun, 08:21
Re: [TowerTalk] Hose Clamps, Doug Renwick, 08:21
Re: [TowerTalk] Hose Clamps, Jerry Gardner, 01:01

January 27, 2013

Re: [TowerTalk] hose clamps, Bryan Swadener, 23:13
Re: [TowerTalk] Hose Clamps, Bill Parry, 16:40
[TowerTalk] Stolen Antenna and more, Mike Ryan, 16:35
Re: [TowerTalk] Hose Clamps, john, 16:02
Re: [TowerTalk] Hose Clamps, Gene Fuller, 16:00
Re: [TowerTalk] Hose Clamps, KJ6Y, 15:26
Re: [TowerTalk] Hose Clamps, K8RI, 14:06
Re: [TowerTalk] Hose Clamps, Jerry Gardner, 13:20
Re: [TowerTalk] Hose Clamps, Patrick Greenlee, 12:02
Re: [TowerTalk] hose clamps, Bob K6UJ, 11:45
Re: [TowerTalk] hose clamps, jcjacobsen, 11:35
[TowerTalk] Bird and pest repellents, Patrick Greenlee, 11:12
Re: [TowerTalk] Hose Clamps, Jim Lux, 11:08
Re: [TowerTalk] Hose Clamps, Patrick Greenlee, 08:57
Re: [TowerTalk] Hose Clamps, Grant Saviers, 08:17
Re: [TowerTalk] Hose Clamps, K8RI, 01:39
[TowerTalk] Hose Clamps, Jerry Gardner, 01:05
Re: [TowerTalk] NEC MODEL, N6FD, 01:03

January 26, 2013

[TowerTalk] Grounding with LNAs half-way between the antenna and shack, Andrew J. Buckler (BBMSC), 21:32
Re: [TowerTalk] NEC MODEL, K0DAN, 14:55
Re: [TowerTalk] Shunt Feeding a LARGE tower?, n8cc, 08:38
Re: [TowerTalk] 40-2CD question, k2qmf, 08:38

January 25, 2013

Re: [TowerTalk] Shunt Feeding a LARGE tower?, K1TTT, 12:51
Re: [TowerTalk] Shunt Feeding a LARGE tower?, Jim Brown, 12:41
[TowerTalk] Shunt Feeding a LARGE tower?, William Powell, 12:34
Re: [TowerTalk] 40-2CD question, Wayne Kline, 10:37
Re: [TowerTalk] 40-2CD question, Jorge Diez - CX6VM, 08:11
Re: [TowerTalk] 40-2CD question, Stan Stockton, 07:37

January 24, 2013

[TowerTalk] 40-2CD question, Jorge Diez - CX6VM, 10:07

January 23, 2013

[TowerTalk] 160M Antenna, Jim Brown, 13:09
Re: [TowerTalk] 160m antenna (was bonding to AC box), John Nistico, 08:43
Re: [TowerTalk] 160m antenna (was bonding to AC box), john, 08:32
Re: [TowerTalk] bonding to AC power box or inside fuse panel?, Dick Green WC1M, 01:22
Re: [TowerTalk] bonding to AC power box or inside fuse panel?, Dick Green WC1M, 01:14

January 22, 2013

Re: [TowerTalk] bonding to AC power box or inside fuse panel?, Jeff Blaine, 21:09
Re: [TowerTalk] bonding to AC power box or inside fuse panel?, john nistico, 21:06
Re: [TowerTalk] bonding to AC power box or inside fuse panel?, K1TTT, 19:25
Re: [TowerTalk] bonding to AC power box or inside fuse panel?, john nistico, 19:10
Re: [TowerTalk] bonding to AC power box or inside fuse panel?, Vincent Weal, 17:37
Re: [TowerTalk] The inertia of rest and the tilt over, Ian White GM3SEK, 16:04
Re: [TowerTalk] The inertia of rest and the tilt over, Steve Jones, 16:03
Re: [TowerTalk] The inertia of rest and the tilt over, Alan NV8A, 15:51
Re: [TowerTalk] The inertia of rest and the tilt over, John Hudson, 15:33
Re: [TowerTalk] The inertia of rest and the tilt over, Rick Karlquist, 15:22
Re: [TowerTalk] The inertia of rest and the tilt over, Rick Karlquist, 15:19
Re: [TowerTalk] The inertia of rest and the tilt over, Larry Loen, 15:18
Re: [TowerTalk] The inertia of rest and the tilt over, John Lemay, 15:12
Re: [TowerTalk] The inertia of rest and the tilt over, Michael OBrien, 15:04
Re: [TowerTalk] Rebar base for new 18HT installation?, Patrick Greenlee, 15:00
Re: [TowerTalk] The inertia of rest and the tilt over, Dana Segler, 14:58
[TowerTalk] The inertia of rest and the tilt over, Larry Loen, 14:41
Re: [TowerTalk] bonding to AC power box or inside fuse panel?, Patrick Greenlee, 14:11
Re: [TowerTalk] bonding to AC power box or inside fuse panel?, Kenneth Goodwin, 12:42
Re: [TowerTalk] bonding to AC power box or inside fuse panel?, Jim Brown, 12:28
[TowerTalk] crank up mast, Michael Goins, 07:53
[TowerTalk] Cadweld failing to ignite, SPWoo, 04:47
Re: [TowerTalk] bonding to AC power box or inside fuse panel?, Jim Brown, 02:19
Re: [TowerTalk] bonding to AC power box or inside fuse panel?, Jeff Blaine, 02:06
Re: [TowerTalk] bonding to AC power box or inside fuse panel?, Jim Brown, 01:13
[TowerTalk] FW: Rebar base for new 18HT installation?, KM5VI, 00:24
Re: [TowerTalk] Cadweld failing to ignite, Larry Loen, 00:24

January 21, 2013

[TowerTalk] Possible New QTH, Jim Chaggaris, 22:55
Re: [TowerTalk] Cadweld failing to ignite, Steve Maki, 22:04
Re: [TowerTalk] bonding to AC power box or inside fuse panel?, Mark Hawley, 20:46
Re: [TowerTalk] bonding to AC power box or inside fuse panel?, Dick Green WC1M, 20:11
Re: [TowerTalk] bonding to AC power box or inside fuse panel?, Jim Brown, 19:33
Re: [TowerTalk] bonding to AC power box or inside fuse panel?, Jim Brown, 19:30
Re: [TowerTalk] bonding to AC power box or inside fuse panel?, Jim Brown, 19:24
Re: [TowerTalk] Cadweld failing to ignite, K8RI, 19:14
Re: [TowerTalk] bonding to AC power box or inside fuse panel?, Joe Subich, W4TV, 18:27
Re: [TowerTalk] Cadweld failing to ignite, David Gilbert, 18:23
Re: [TowerTalk] bonding to AC power box or inside fuse panel?, vk3pa, 18:13
Re: [TowerTalk] bonding to AC power box or inside fuse panel?, Patrick Greenlee, 18:07
[TowerTalk] bonding to AC power box or inside fuse panel?, Jeff Blaine, 17:51
Re: [TowerTalk] Cadweld failing to ignite, Gene Smar, 17:31
Re: [TowerTalk] Cadweld failing to ignite, K8RI, 16:53
[TowerTalk] Cadweld failing to ignite, SPWoo, 16:23
Re: [TowerTalk] Rebar base for new 18HT installation?, Tom Anderson, 15:10
Re: [TowerTalk] Rebar base for new 18HT installation?, Wayne Kline, 15:01
Re: [TowerTalk] Rebar base for new 18HT installation?, Tim Duffy K3LR, 13:35
[TowerTalk] Rebar base for new 18HT installation?, Allen Brier N5XZ, 12:19
Re: [TowerTalk] Linear Resonator, Roger Parsons, 10:00
[TowerTalk] (no subject), JAMES TOLAR, 05:26

January 20, 2013

[TowerTalk] As the antenna turns..., Larry Loen, 23:28
[TowerTalk] Linear Resonator, Roger Parsons, 11:07

January 18, 2013

[TowerTalk] FW: TriEx Tashjian W 51 replacement cable, KM5VI, 03:37

January 17, 2013

Re: [TowerTalk] Up to Date Instructions for MicroDEM and HFTA?, K4SAV, 12:51
Re: [TowerTalk] minimum rotator for hex beam, Al Kozakiewicz, 11:20
Re: [TowerTalk] minimum rotator for hex beam, Tim L, 11:09
Re: [TowerTalk] minimum rotator for hex beam, Larry Loen, 11:07
[TowerTalk] TriEx Tashjian W 51 replacement cable, Rich, 07:54
Re: [TowerTalk] minimum rotator for hex beam, Steve Dyer, 07:53
[TowerTalk] Up to Date Instructions for MicroDEM and HFTA?, Rob Frohne, 04:04

January 16, 2013

Re: [TowerTalk] 11th hour grounding question, Keith Dutson, 17:57
[TowerTalk] 11th hour grounding question, Larry Loen, 17:38
[TowerTalk] Decisions made on my Tower/Antenna project, Larry Loen, 17:30
Re: [TowerTalk] HFTA and 15 mts stack, Cqtestk4xs, 17:05
Re: [TowerTalk] HFTA and 15 mts stack, Pete Smith N4ZR, 16:56
[TowerTalk] [antenneX] Save 25% on 3-Vol Wire Antenna Books, K7LXC, 16:13
[TowerTalk] minimum rotator for hex beam, Patrick Greenlee, 15:32
Re: [TowerTalk] TowerTalk] HFTA and 15 mts stack, john, 15:12
Re: [TowerTalk] HFTA and 15 mts stack, bob finger, 14:40
Re: [TowerTalk] HFTA and 15 mts stack, Billy Cox, 14:33
[TowerTalk] HFTA and 15 mts stack, Jorge Diez - CX6VM, 14:26
Re: [TowerTalk] Help opening G 2800 Yaesu rotor, Rich Hallman - N7TR, 00:23

January 15, 2013

Re: [TowerTalk] Help opening G 2800 Yaesu rotor, Pete Smith N4ZR, 08:04
[TowerTalk] Help opening G 2800 Yaesu rotor, Charles Harpole, 07:40
[TowerTalk] GA-3000 found, tnx, Charles Harpole, 07:40

January 14, 2013

Re: [TowerTalk] any source for a GA-3000 ???, Kenneth Grimm, 17:55
Re: [TowerTalk] AlfaSpid controller problems, Al Kozakiewicz, 17:05
[TowerTalk] AlfaSpid controller problems, Robert Bajuk, 16:48
Re: [TowerTalk] HamIV Rotor sluggish, Dick Williams, 16:19
Re: [TowerTalk] HamIV Rotor sluggish, Bryan Swadener, 14:29
[TowerTalk] GA-3000, Larry stowell, 13:46
Re: [TowerTalk] TowerTalk Digest, Vol 121, Issue 31, Jim Spears, 12:42
Re: [TowerTalk] HamIV Rotor sluggish, Doug Snowden, 12:28
[TowerTalk] K4VUD's search for a Yaesu GA-3000, Jim Spears, 11:42
Re: [TowerTalk] any source for a GA-3000 ???, Missouri Guy, 11:27
Re: [TowerTalk] any source for a GA-3000 ???, K8RI, 10:33
Re: [TowerTalk] any source for a GA-3000 ???, Larry, 09:01
Re: [TowerTalk] any source for a GA-3000 ???, john, 07:17
Re: [TowerTalk] any source for a GA-3000 ???, Larry, 04:56
[TowerTalk] Considering swapping out my KT36XA and A3WS for a Steppir (or Force 12 6BA), Larry Loen, 00:38
Re: [TowerTalk] Elementary Rx protection question, Avery Davis, 00:26
Re: [TowerTalk] GA-3000 found, tnx, K8RI, 00:21

January 13, 2013

Re: [TowerTalk] GA-3000 found, tnx, john, 23:05
Re: [TowerTalk] any source for a GA-3000 ???, john, 22:10
Re: [TowerTalk] any source for a GA-3000 ???, Larry, 20:49
[TowerTalk] Fwd: Elementary Rx protection question, Hans Hammarquist, 20:32
Re: [TowerTalk] any source for a GA-3000 ???, EZ Rhino, 19:41
Re: [TowerTalk] Elementary Rx protection question, Jim Lux, 19:34
Re: [TowerTalk] HamIV Rotor HUM, Missouri Guy, 19:26
Re: [TowerTalk] any source for a GA-3000 ???, K8RI, 19:20
Re: [TowerTalk] Elementary Rx protection question, Al Kozakiewicz, 19:06
Re: [TowerTalk] any source for a GA-3000 ???, john, 18:41
Re: [TowerTalk] Elementary Rx protection question, K8RI, 17:09
Re: [TowerTalk] yagi f/b and rx s/n, Richard (Rick) Karlquist, 16:19
Re: [TowerTalk] Elementary Rx protection question, Bruce Jungwirth, 16:11
[TowerTalk] Elementary Rx protection question, Pete Smith N4ZR, 16:00
[TowerTalk] I owen a HG-33, KB3YRC, 14:30
[TowerTalk] any source for a GA-3000 ???, Charles Harpole, 14:30
[TowerTalk] HamIV Rotor sluggish, Spencer, 12:58
Re: [TowerTalk] yagi f/b and rx s/n, Barry N1EU, 12:23
Re: [TowerTalk] HamIV Rotor HUM, Tony Brock-Fisher, 12:13
Re: [TowerTalk] yagi f/b and rx s/n, Jim Lux, 12:12
Re: [TowerTalk] HamIV Rotor HUM, Anthony W. DePrato, 11:47
Re: [TowerTalk] yagi f/b and rx s/n, john, 11:18
Re: [TowerTalk] HamIV Rotor sluggish, K8RI, 11:03
Re: [TowerTalk] HamIV Rotor sluggish, Bryan Swadener, 10:58
Re: [TowerTalk] HamIV Rotor sluggish, Stan Stockton, 10:29
Re: [TowerTalk] yagi f/b and rx s/n, Stan Stockton, 10:22
Re: [TowerTalk] yagi f/b and rx s/n, K8RI, 09:53
Re: [TowerTalk] HamIV Rotor sluggish, Brian Alsop, 09:47
Re: [TowerTalk] HamIV Rotor sluggish, Bryan Swadener, 09:40
Re: [TowerTalk] yagi f/b and rx s/n, Patrick Greenlee, 09:27
[TowerTalk] yagi f/b and rx s/n, Barry N1EU, 06:08
Re: [TowerTalk] HamIV Rotor sluggish, Gene Fuller, 00:14

January 12, 2013

Re: [TowerTalk] HamIV Rotor sluggish, Missouri Guy, 23:53
Re: [TowerTalk] HamIV Rotor sluggish, Jim W7RY, 20:58
Re: [TowerTalk] HamIV Rotor sluggish, Gene Fuller, 20:31
Re: [TowerTalk] HamIV Rotor sluggish, Don Moman VE6JY, 20:04
Re: [TowerTalk] HamIV Rotor sluggish, K0DAN, 19:45
Re: [TowerTalk] HamIV Rotor sluggish, Dick Dievendorff, 19:39
[TowerTalk] HamIV Rotor sluggish, Doug Snowden, 19:21
Re: [TowerTalk] Yaesu Rotor Connectors, Tom W3FRG, 06:35

January 11, 2013

Re: [TowerTalk] Yaesu Rotor Connectors, Tom-W3FRG, 21:04
Re: [TowerTalk] DX Engineering coax prep tool, K8RI, 18:44
Re: [TowerTalk] Yaesu Rotor Connectors, Mike Ryan, 17:25
Re: [TowerTalk] Yaesu Rotor Connectors, Chris, 17:03
Re: [TowerTalk] Yaesu Rotor Connectors, Larry K4AB, 16:59
Re: [TowerTalk] Yaesu Rotor Connectors, Tim Duffy K3LR, 16:47
[TowerTalk] Yaesu Rotor Connectors, Mike Ryan, 16:43
Re: [TowerTalk] DX Engineering coax prep tool, Tim Duffy K3LR, 16:43
[TowerTalk] DX Engineering coax prep tool, Kelly Taylor, 16:37

January 10, 2013

Re: [TowerTalk] W-51 Tri-X Tower / Tashjian, Tom Anderson, 13:19
[TowerTalk] W-51 Tri-X Tower / Tashjian, NI6H, 08:37
[TowerTalk] Free ARRL Mast calculator, Jim Thomson, 03:27

January 09, 2013

[TowerTalk] Need TB 3 Thrust Bearing, Biff Craine, 17:39
[TowerTalk] Bye Bye Deer, Charles Lind, 11:07
Re: [TowerTalk] Bye Bye Deer, Patrick Greenlee, 09:30

January 08, 2013

Re: [TowerTalk] Bye Bye Deer, Ro Grrr, 12:16
Re: [TowerTalk] Anyone using the Fulton KW3000 worm drive?, Bill Winkis, 09:18
Re: [TowerTalk] Topband: Horizontal Loop Performance??, Edward, 07:58

January 07, 2013

Re: [TowerTalk] Bye Bye Deer, Mike Ryan, 20:22
Re: [TowerTalk] Bye Bye Deer, Steve Lane, 20:02
Re: [TowerTalk] Bye Bye Deer, Jim Rhodes, 19:43
Re: [TowerTalk] TowerTalk Digest, Vol 121, Issue 10, Richard W. Ehrhorn, 17:33
Re: [TowerTalk] Anyone using the Fulton KW3000 worm drive?, Rick Karlquist, 17:19
Re: [TowerTalk] Bye Bye Deer, Pete Smith N4ZR, 17:01
Re: [TowerTalk] Anyone using the Fulton KW3000 worm drive?, Fredric T. Serota, 16:30
Re: [TowerTalk] Anyone using the Fulton KW3000 worm drive?, Steve Jones, 16:04
Re: [TowerTalk] Anyone using the Fulton KW3000 worm drive?, Rick Karlquist, 15:52
Re: [TowerTalk] Bye Bye Deer, Rich, 12:33
[TowerTalk] Anyone using the Fulton KW3000 worm drive?, Fredric T. Serota, 11:52
Re: [TowerTalk] Bye Bye Deer, Keith Dutson, 11:26
Re: [TowerTalk] Bye Bye Deer, Wayne Kline, 09:45
Re: [TowerTalk] Bye Bye Deer, Keith Dutson, 08:56
Re: [TowerTalk] Thrust Bearing..., K8RI, 01:14

January 06, 2013

Re: [TowerTalk] Thrust Bearing..., Jim Lux, 23:34
Re: [TowerTalk] Thrust Bearing..., K8RI, 23:12
Re: [TowerTalk] Thrust Bearing..., Grant Saviers, 23:03
Re: [TowerTalk] Thrust Bearing..., Stan Stockton, 22:20
Re: [TowerTalk] Horizontal Loop Performance??, David Thompson, 21:58
Re: [TowerTalk] Horizontal Loop Performance??, john, 20:42
Re: [TowerTalk] Topband: Horizontal Loop Performance??, Jim Lux, 19:27
Re: [TowerTalk] Bye Bye Deer, Missouri Guy, 18:27
Re: [TowerTalk] Bye Bye Deer, Larry, 16:12
Re: [TowerTalk] Bye Bye Deer, Wayne Kline, 16:01
Re: [TowerTalk] Bye Bye Deer, K8RI, 15:05
Re: [TowerTalk] Bye Bye Deer, K8RI, 15:02
Re: [TowerTalk] Bye Bye Deer, Pete Smith N4ZR, 13:28
[TowerTalk] Thrust Bearing..., Dave Cole, 12:40
Re: [TowerTalk] Bye Bye Deer, K1TTT, 10:51
Re: [TowerTalk] Bye Bye Deer, Jack, 09:57
[TowerTalk] Bye Bye Deer, Jim Thomson, 09:44
Re: [TowerTalk] Topband: Horizontal Loop Performance??, Yuri Blanarovich, 09:18
Re: [TowerTalk] TowerTalk Digest, Vol 121, Issue 11, Dennis Riise, 09:18
Re: [TowerTalk] Topband: Horizontal Loop Performance??, N4IS, 09:18
[TowerTalk] WANTED: Thrust Bearing, Dugas, Jason A. (JSC-EP511), 09:17
[TowerTalk] Bye Bye Deer, Doug Renwick, 09:17

January 05, 2013

Re: [TowerTalk] Help with rotor valuation, Telrex, K8RI, 21:24
Re: [TowerTalk] Help with rotor valuation, Telrex, Martin Sole, 20:53
Re: [TowerTalk] Help with rotor valuation, Telrex, john, 18:13
[TowerTalk] Horizontal Loop Performance??, Spencer, 15:32
Re: [TowerTalk] Bye Bye Deer, Patrick Greenlee, 13:04
Re: [TowerTalk] Horizontal Loop Performance??, Edward, 12:54
Re: [TowerTalk] Bye Bye Birdies, Patrick Greenlee, 12:43
Re: [TowerTalk] Help with rotor valuation, Telrex, K8RI, 11:51
Re: [TowerTalk] Source for 2" OD Mast, K7LXC, 10:50
Re: [TowerTalk] Help with rotor valuation, Telrex, Gene Fuller, 10:47
Re: [TowerTalk] Help with rotor valuation, Telrex, Matrin Sole, 10:19
Re: [TowerTalk] Horizontal Loop Performance??, Jim Lux, 10:19
[TowerTalk] Horizontal Loop Performance??, Edward Sylvester, 10:13
[TowerTalk] Source for 2" OD Mast, Jim Thomson, 09:19
Re: [TowerTalk] Help with rotor valuation, Telrex, K1TTT, 08:43
[TowerTalk] Help with rotor valuation, Telrex, Matrin Sole, 08:05
Re: [TowerTalk] Source for 2" OD Mast, K1TTT, 07:08
[TowerTalk] Horizontal Loop Performance??, Edward Sylvester, 02:12

January 04, 2013

Re: [TowerTalk] Source for 2" OD Mast, Jon Pearl - W4ABC, 20:35
Re: [TowerTalk] Bye Bye Birdies, Grant Saviers, 20:26
Re: [TowerTalk] Source for 2" OD Mast, Grant Saviers, 20:21
Re: [TowerTalk] Source for 2" OD Mast, Grant Saviers, 20:04
Re: [TowerTalk] Source for 2" OD Mast, EZ Rhino, 19:17
Re: [TowerTalk] Source for 2" OD Mast, Rick Karlquist, 19:12
Re: [TowerTalk] Source for 2" OD Mast, N2TK, Tony, 18:42
[TowerTalk] Steel & metal in Bay Area, Craig Brammer, 18:14
Re: [TowerTalk] Source for 2" OD Mast, Mike, 17:58
Re: [TowerTalk] Source for 2" OD Mast, Drax Felton, 17:53
Re: [TowerTalk] Source for 2" OD Mast, Richard Solomon, 17:52
Re: [TowerTalk] Source for 2" OD Mast, Jon Pearl - W4ABC, 17:39
Re: [TowerTalk] Source for 2" OD Mast, Mike Lyon, 17:31
Re: [TowerTalk] Source for 2" OD Mast, Richard Solomon, 17:30
Re: [TowerTalk] Source for 2" OD Mast, Mike Lyon, 17:29
Re: [TowerTalk] Source for 2" OD Mast, Jon Pearl - W4ABC, 17:28
Re: [TowerTalk] Source for 2" OD Mast, Jim Lux, 17:27
Re: [TowerTalk] Source for 2" OD Mast, Bryan Swadener, 17:25
Re: [TowerTalk] Source for 2" OD Mast, W2GR, 17:17
Re: [TowerTalk] Source for 2" OD Mast, Jim Lux, 17:02
Re: [TowerTalk] Source for 2" OD Mast, Jerry Gardner, 16:59
Re: [TowerTalk] Source for 2" OD Mast, Mike Lyon, 16:49
Re: [TowerTalk] Source for 2" OD Mast, Rick Karlquist, 16:40
Re: [TowerTalk] Source for 2" OD Mast, Rick Karlquist, 16:38
Re: [TowerTalk] Source for 2" OD Mast, Guy Molinari, 16:13
Re: [TowerTalk] Source for 2" OD Mast, Gene Smar, 15:47
Re: [TowerTalk] Source for 2" OD Mast, K1TTT, 15:46
Re: [TowerTalk] Source for 2" OD Mast, Mike Lyon, 15:38
Re: [TowerTalk] Source for 2" OD Mast, bob finger, 15:34
Re: [TowerTalk] Source for 2" OD Mast, Mike Lyon, 15:28
[TowerTalk] Source for 2" OD Mast, Jerry Gardner, 15:26
Re: [TowerTalk] Bye Bye Birdies, Patrick Greenlee, 13:52
[TowerTalk] what is used for gear redux on newer UST products ??, Jim Thomson, 06:26
[TowerTalk] Tower supplies, Cqtestk4xs, 05:55
Re: [TowerTalk] Bye Bye Birdies, Robert Chudek - K0RC, 05:55

January 03, 2013

Re: [TowerTalk] Motorized Winch for US Tower, Rick Karlquist, 19:44
Re: [TowerTalk] Motorized Winch for US Tower, Rick Karlquist, 19:17
Re: [TowerTalk] Motorized Winch for US Tower, Jim W7RY, 18:27
Re: [TowerTalk] Motorized Winch for US Tower, Jon Pearl - W4ABC, 17:46
Re: [TowerTalk] Motorized Winch for US Tower, Rick Karlquist, 16:56
Re: [TowerTalk] Motorized Winch for US Tower, Rob Santello, 15:16
[TowerTalk] Inverted L hung from tower, Rob, AB1NJ, 12:44
Re: [TowerTalk] Motorized Winch for US Tower, KB1STH-Ivan Shapiro, 12:26
Re: [TowerTalk] Motorized Winch for US Tower, Grant Saviers, 11:16
Re: [TowerTalk] Motorized Winch for US Tower, Richard (Rick) Karlquist, 11:14
[TowerTalk] 25G Wanted, Bud Kozloff, 08:29
Re: [TowerTalk] TowerTalk Digest, Vol 119, Issue 39, Cal Zethmayr, 01:33
Re: [TowerTalk] Motorized Winch for US Tower, K8RI, 00:40

January 02, 2013

Re: [TowerTalk] Motorized Winch for US Tower, Richard (Rick) Karlquist, 22:51
Re: [TowerTalk] Earthing a tower, K8RI, 20:24
Re: [TowerTalk] Earthing a tower, Jim Lux, 12:21
Re: [TowerTalk] Earthing a tower, K8RI, 11:39
Re: [TowerTalk] 80M loading coil - open coil or toroid?, Jim Lux, 10:45
Re: [TowerTalk] Earthing a tower, Jim Lux, 10:12

January 01, 2013

Re: [TowerTalk] Earthing a tower, K8RI, 23:21
Re: [TowerTalk] Motorized Winch for US Tower, Eugene Jensen, 22:19
[TowerTalk] 80M loading coil - open coil or toroid?, N2TK, Tony, 15:43
Re: [TowerTalk] Motorized Winch for US Tower, Patrick Greenlee, 14:52
Re: [TowerTalk] Motorized Winch for US Tower, Rich Hallman - N7TR, 14:31
Re: [TowerTalk] Motorized Winch for US Tower, John Thompson, 14:23
Re: [TowerTalk] Motorized Winch for US Tower, Bryan Swadener, 13:25
Re: [TowerTalk] Earthing a tower, ve4xt, 09:18
[TowerTalk] Motorized Winch for US Tower, WK1W Ivan Shapiro, 09:17
[TowerTalk] F12 warc7 Element Spacing and mouting point?, Richard Thorne, 08:52