December 2018 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Sat Dec 1 11:01:07 EST 2018
Ending: Mon Dec 31 22:46:55 EST 2018
Messages: 355

• Topband: FT8 - How it really works   Eugene Popov /RA0FF/
• Topband: new style PL-259's with screw on back INSTRUCTIONS   MU 4CX250B
• Topband: Rather use N-type (was Re: The answer to PL-259 soldering/reliability problems)   MU 4CX250B
• Topband: new style PL-259's with screw on back INSTRUCTIONS   MICHAEL ST ANGELO
• Topband: Pasternack PL259   MICHAEL ST ANGELO
• Topband: Effect of Radial Field on Antenna Impedance   MICHAEL ST ANGELO
• Topband: Tennis Ball launcher part list with links   Cecil Acuff
• Topband: Rather use N-type (was Re: The answer to PL-259 soldering/reliability problems)   Cecil Acuff
• Topband: Rather use N-type (was Re: The answer to PL-259 soldering/reliability problems)   Cecil Acuff
• Topband: Inverted L improvement question   Cecil Acuff
• Topband: Inverted L improvement question   Cecil Acuff
• Topband: Need for capacitor   Cecil Acuff
• Topband: identifying noise source   Jean-Paul Albert
• Topband: Rather use N-type (was Re: The answer to PL-259   Rob Atkinson
• Topband: Rather use N-type (was Re: The answer to PL-259   Rob Atkinson
• Topband: Inverted L improvement question   Rob Atkinson
• Topband: RF in the DX Eng. NCC-1 (and a fix)   Rob Atkinson
• Topband: Inverted L improvement question - Part 2   Rob Atkinson
• Topband: Inverted L improvement question - Part 2   Ralph Bellas
• Topband: Morning Openings to Europe from Oregon   Raymond Benny
• Topband: Pasternack PL259   Peter Bertini
• Topband: choke/bleeder resistor on RXvertical?   Peter Bertini
• Topband: Three Port Rx antenna splitter   Peter Bertini
• Topband: Ultimate antenna launcher....   Peter Bertini
• Topband: Inverted L improvement question - Part 2   Peter Bertini
• Topband: Inverted L improvement question - Part 2   Peter Bertini
• Topband: [CQ-Contest] At least four more years of solar minimum?   Yuri Blanarovich
• Topband: new style PL-259's with screw on back INSTRUCTIONS   Stein-Roar Brobakken
• Topband: Rather use N-type (was Re: The answer to PL-259 soldering/reliability problems)   Bruce
• Topband: ET3YOTA   Johann Bruinier
• Topband: new style PL-259's with screw on back INSTRUCTIONS   Chortek, Robert L.
• Topband: Condx for Stew Perry!   Chortek, Robert L.
• Topband: Rather use N-type (was Re: The answer to PL-259 soldering/reliability problems)   Paul Christensen
• Topband: Rather use N-type (was Re: The answer to PL-259 soldering/reliability problems)   Paul Christensen
• Topband: ET3YOTA Lowband Report   Ken Claerbout
• Topband: Condx for Stew Perry!   Jim Clymer
• Topband: Pasternack PL259   Bill Cromwell
• Topband: new style PL-259's with screw on back, INSTRUCTIONS   CUTTER DAVID
• Topband: Pasternack PL259   CUTTER DAVID
• Topband: new antenna   Andree DL8LAS
• Topband: Observations on a base-loaded 70 ft vertical.   DXer
• Topband: On FT8, noise bandwidths, filters, and signal vs noise.   DXer
• Topband: Inverted L improvement question   Dan
• Topband: Dual Sunrise peaks   Dan Flaig, NP2J
• Topband: Inverted L improvement question   Arthur Delibert
• Topband: Topband Digest, Vol 192, Issue 33   Arthur Delibert
• Topband: choke/bleeder resistor on RXvertical?   Chuck Dietz
• Topband: FT8 - How it really works   Chuck Dietz
• Topband: FT8 - How it really works   Chuck Dietz
• Topband: Topband Digest, Vol 192, Issue 33   Chuck Dietz
• Topband: Rather use N-type (was Re: The answer to PL-259 soldering/reliability problems)   Phil Duff
• Topband: Rather use N-type (was Re: The answer to PL-259   Tim Duffy
• Topband: spare parts for RX 4SQ   Tim Duffy
• Topband: Might be a good EU DX night   Tim Duffy
• Topband: EK8ZT on Topband FT8   Tim Duffy
• Topband: Drone and pulley   W0MU Mike Fatchett
• Topband: launching lines over trees   Mike Furrey
• Topband: new style PL-259's with screw on back INSTRUCTIONS   Clive GM3POI
• Topband: new style PL-259's with screw on back INSTRUCTIONS   Clive GM3POI
• Topband: new style PL-259's with screw on back INSTRUCTIONS   Clive GM3POI
• Topband: Rather use N-type (was Re: The answer to PL-259 soldering/reliability problems)   Clive GM3POI
• Topband: Rather use N-type (was Re: The answer to PL-259 soldering/reliability problems)   Clive GM3POI
• Topband: Might be a good EU DX night   Clive GM3POI
• Topband: Fwd: Topband Digest -- RX Antenna Performance   Clive GM3POI
• Topband: Observations on a base-loaded 70 ft vertical   Jim Garland
• Topband: Rather use N-type (was Re: The answer to PL-259 soldering/reliability problems)   Jim Garland
• Topband: W7LR   Hank Garretson
• Topband: K9AY Box, 6 pin din Pin-out   Bill Gillenwater
• Topband: Inverted L improvement question   Todd Goins
• Topband: Inverted L improvement question   Todd Goins
• Topband: Inverted L improvement question   Todd Goins
• Topband: Inverted L improvement question - Part 2   Todd Goins
• Topband: Inverted L improvement question - Part 2   Todd Goins
• Topband: Inverted L improvement question - Part 2   Todd Goins
• Topband: Inverted L improvement question - Part 2   Todd Goins
• Topband: Inverted L improvement question - Part 2   Todd Goins
• Topband: Inverted L improvement question - Part 2   Todd Goins
• Topband: Inverted L improvement question - Part 2   Todd Goins
• Topband: ARRL DXCC - 160 Meters   Victor Goncharsky
• Topband: ARRL DXCC - 160 Meters   Victor Goncharsky
• Topband: Fwd: Re[2]: ARRL DXCC - 160 Meters   Victor Goncharsky
• Topband: Rather use N-type (was Re: The answer to PL-259 soldering/reliability problems)   Greg-zl3ix
• Topband: W7LR   Dave Heil
• Topband: FT8 - How it really works   Patrik Hrvatin
• Topband: The answer to PL-259 soldering/reliability problems   Steve Ireland
• Topband: On FT8, noise bandwidths, filters, and signal vs noise.   JC
• Topband: FT8 - How it really works   JC
• Topband: 160 Antenna   Joe
• Topband: 160 Antenna   Joe
• Topband: K9AY Box, 6 pin din Pin-out   Joe Subich, W4TV
• Topband: FT8 - How it really works   Joe Subich, W4TV
• Topband: FT8 - How it really works   Joe Subich, W4TV
• Topband: FT8 - How it really works   Joe Subich, W4TV
• Topband: Rather use N-type (was Re: The answer to PL-259   John Harden, D.M.D.
• Topband: Rather use N-type (was Re: The answer to PL-259   John Harden, D.M.D.
• Topband: Waller Flag   John Harden, D.M.D.
• Topband: JAs on TopBand   John Harden, D.M.D.
• Topband: Recomended Relays   Sam Josuweit
• Topband: Recomended Relays   Sam Josuweit
• Topband: Recomended Relays   Sam Josuweit
• Topband: Inverted L improvement question   Sam Josuweit
• Topband: JAs on TopBand   Sam Josuweit
• Topband: Stew Perry Contest   Sam Josuweit
• Topband: N4KG reverse-fed vs. Gamma/omega   Guy Olinger K2AV
• Topband: new style PL-259's with screw on back INSTRUCTIONS   Guy Olinger K2AV
• Topband: Rather use N-type (was Re: The answer to PL-259 soldering/reliability problems)   Guy Olinger K2AV
• Topband: Inverted L improvement question - Part 2   Guy Olinger K2AV
• Topband: JAs on TopBand   Mark K3MSB
• Topband: Band Report   Larry K4AB
• Topband: 160 Antenna   K4SAV
• Topband: FT8 - How it really works   K4SAV
• Topband: FT8 - How it really works   K4SAV
• Topband: FT8 - How it really works   K4SAV
• Topband: FT8 - How it really works   K4SAV
• Topband: FT8 - How it really works   K4SAV
• Topband: FT8 - How it really works   K4SAV
• Topband: FT8 - How it really works   K4SAV
• Topband: Rather use N-type (was Re: The answer to PL-259 soldering/reliability problems)   Renee K6FSB
• Topband: new style PL-259's with screw on back INSTRUCTIONS   Gary - K7EK
• Topband: choke/bleeder resistor on RXvertical?   Gary - K7EK
• Topband: 160 Antenna   Gary Kohtala - K7EK
• Topband: Tennis Ball launcher part list with links   Tim Childers K9CQ
• Topband: JAs on TopBand   K9FD
• Topband: Might be a good EU DX night   K9FD
• Topband: new style PL-259's with screw on back INSTRUCTIONS   Gary K9GS
• Topband: Ultimate antenna launcher....   Gary K9GS
• Topband: Need for capacitor   Gary K9GS
• Topband: Rather use N-type (was Re: The answer to PL-259   John K9UWA
• Topband: Tennis Ball Launcher   Richard (Rick) Karlquist
• Topband: Rather use N-type (was Re: The answer to PL-259 soldering/reliability problems)   Richard (Rick) Karlquist
• Topband: Recommended Relays   Richard (Rick) Karlquist
• Topband: Rather use N-type (was Re: The answer to PL-259   Richard (Rick) Karlquist
• Topband: Rather use N-type (was Re: The answer to PL-259   Richard (Rick) Karlquist
• Topband: Rather use N-type (was Re: The answer to PL-259   Richard (Rick) Karlquist
• Topband: Waller Flag   Richard (Rick) Karlquist
• Topband: 160 Antenna   Richard (Rick) Karlquist
• Topband: capacity needed for Deturning tower   John Kaufmann
• Topband: Recomended Relays   Don Kirk
• Topband: Recomended Relays   Don Kirk
• Topband: Band Report   Don Kirk
• Topband: Band Report   Don Kirk
• Topband: Might be a good EU DX night   Don Kirk
• Topband: 4.3 -10 Re: Rather use N-type (was Re: The answer to PL-259   Wayne Kline
• Topband: W7LR   Martin Kratoska
• Topband: Rather use N-type (was Re: The answer to PL-259 soldering/reliability problems)   Martin Kratoska
• Topband: Recomended Relays   Martin Kratoska
• Topband: Rather use N-type (was Re: The answer to PL-259   Martin Kratoska
• Topband: Pasternack PL259   James Lee
• Topband: (no subject)   James Lee
• Topband: V84SAA notes and suggestions - pls take a look - it may help u to work us on 160m!   Filipe Lopes
• Topband: Might be a good EU DX night   Mark Lunday
• Topband: Might be a good EU DX night   Mark Lunday
• Topband: Rather use N-type (was Re: The answer to PL-259   Steve Maki
• Topband: Rather use N-type (was Re: The answer to PL-259   Steve Maki
• Topband: 4.3 -10 Re: Rather use N-type (was Re: The answer to PL-259 soldering/reliability problems)   Steve Maki
• Topband: new style PL-259's with screw on back, INSTRUCTIONS   Martin
• Topband: FT8 - How it really works   Martin
• Topband: At least four more years of solar minimum?   Paul Mclaren
• Topband: Might be a good EU DX night   Paul Mclaren
• Topband: K3LR Pl-259 connector technique   Scott Meister
• Topband: spare parts for RX 4SQ   Emir Memic
• Topband: Inverted L improvement question - Part 2   Brian Miller
• Topband: Rather use N-type (was Re: The answer to PL-259 soldering/reliability problems)   N2TK, Tony
• Topband: N7DF QLF CW in SP   N7DF
• Topband: new style PL-259's with screw on back INSTRUCTIONS   Pete Michaelis - N8TR
• Topband: Might be a good EU DX night   Lloyd - N9LB
• Topband: Three Port Rx antenna splitter   Eric NO3M
• Topband: Three Port Rx antenna splitter   Eric NO3M
• Topband: W7LR   Kees Nijdam
• Topband: Might be a good EU DX night   JAYB1943 at OPTONLINE.NET
• Topband: JAs on TopBand   David Olean
• Topband: Updated Beverage antenna notes   David Olean
• Topband: Inverted L improvement question   David Olean
• Topband: Inverted L improvement question - Part 2   David Olean
• Topband: Band Report   Tony Osman
• Topband: Stew Perry and RAC Winter contest   Tony Osman
• Topband: Rather use N-type (was Re: The answer to PL-259 soldering/reliability problems)   Petr Ourednik
• Topband: ARRL DXCC - 160 Meters   Petr Ourednik
• Topband: Rather use N-type   Robert Parkes
• Topband: choke/bleeder resistor on RXvertical?   Dale Putnam
• Topband: CT1ILT request   Ricardo A. Rodrigues
• Topband: FT8 - How it really works   James M. Roop
• Topband: Inverted L improvement question   S57AD
• Topband: W7LR   Lee STRAHAN
• Topband: Stew Perry Contest   Lee STRAHAN
• Topband: Recommended Relays   Grant Saviers
• Topband: launching lines over trees   Grant Saviers
• Topband: Might be a good EU DX night   Grant Saviers
• Topband: Inverted L improvement question - Part 2   Grant Saviers
• Topband: Inverted L improvement question - Part 2   Grant Saviers
• Topband: Alert! The Stew Perry TopBand DX Challenge Approaches   Lew Sayre
• Topband: One Week until The Stew Perry Top Band DX Challenge!   Lew Sayre
• Topband: The Stew Perry TopBand Challenge 1500Z Dec.29 2018   Lew Sayre
• Topband: Stew Perry 2018   Lew Sayre
• Topband: Recomended Relays   Tim Shoppa
• Topband: On FT8, noise bandwidths, filters, and signal vs noise.   Tim Shoppa
• Topband: FT8 - How it really works   Tim Shoppa
• Topband: Need for capacitor   Tim Shoppa
• Topband: N4KG reverse-fed vs. Gamma/omega   Kenny Silverman
• Topband: N4KG reverse-fed vs. Gamma/omega   Kenny Silverman
• Topband: N4KG reverse-fed vs. Gamma/omega   Kenny Silverman
• Topband: Shunt feed procedure?   Kenny Silverman
• Topband: Shunt feed procedure?   Kenny Silverman
• Topband: More radials   Gary Smith
• Topband: Band Report   Gary Smith
• Topband: Inverted L improvement question   Gary Smith
• Topband: On FT8, noise bandwidths, filters, and signal vs noise.   Gary Smith
• Topband: EK8ZT on Topband FT8   Gary Smith
• Topband: SP   Gary Smith
• Topband: Stew Perry Contest   Gary Smith
• Topband: Stew Perry Contest   Gary Smith
• Topband: phased array question   Ron Spencer
• Topband: Hi-z array   Steve
• Topband: Observations on a base-loaded 70 ft vertical   Wes Stewart
• Topband: Effect of Radial Field on Antenna Impedance   Wes Stewart
• Topband: Boring Report - N6TR   Wes Stewart
• Topband: Band Report   Wes Stewart
• Topband: Inverted L improvement question   Wes Stewart
• Topband: choke/bleeder resistor on RXvertical?   Wes Stewart
• Topband: Inverted L improvement question   Wes Stewart
• Topband: Inverted L improvement question   Wes Stewart
• Topband: Inverted L improvement question   Wes Stewart
• Topband: Inverted L improvement question   Wes Stewart
• Topband: EK8ZT on Topband FT8   Wes Stewart
• Topband: Waller Flag   Stan Stockton
• Topband: Waller Flag   Stan Stockton
• Topband: Waller Flag   Stan Stockton
• Topband: 160 Antenna   Stan Stockton
• Topband: Three Port Rx antenna splitter   Stan Stockton
• Topband: Topband Digest, Vol 192, Issue 33   Jay Terleski
• Topband: Rather use N-type (was Re: The answer to PL-259   Jim Thomson
• Topband: Rather use N-type (was Re: The answer to PL-259   Jim Thomson
• Topband: Rather use N-type (was Re: The answer to PL-259   Jim Thomson
• Topband: "He invented the Waller flag, IIRC"   Bill Tippett
• Topband: Stew Perry Contest   Russ Tobolic
• Topband: W7LR   Tree
• Topband: Shunt feed procedure?   Tree
• Topband: Boring Report - N6TR   Tree
• Topband: choke/bleeder resistor on RXvertical?   Tree
• Topband: Morning Openings to Europe from Oregon   Tree
• Topband: More Boring report (from Manning, OR)   Tree
• Topband: Surprising condx   VE6WZ_Steve
• Topband: TB CW activity   VE6WZ_Steve
• Topband: Waller Flag   Mike Smith VE9AA
• Topband: Three Port Rx antenna splitter   Frank VO1HP
• Topband: Three Port Rx antenna splitter   Frank VO1HP
• Topband: Topband Digest, Vol 192, Issue 6   Drew Vonada-Smith
• Topband: Morning Openings to Europe from Oregon   W7RH
• Topband: TB CW activity   W7RH
• Topband: Might be a good EU DX night   W7RH
• Topband: Topband Digest, Vol 192, Issue 33   W7RH
• Topband: Rather use N-type (was Re: The answer to PL-259 soldering/reliability problems)   GEORGE WALLNER
• Topband: Unofficial archive of the works from the early pioneers of Amateur Radio's digital communications era   GEORGE WALLNER
• Topband: Fwd: Topband Digest -- RX Antenna Performance   GEORGE WALLNER
• Topband: Condx for Stew Perry!   Jim - WS6X
• Topband: Pasternack PL259   WW3S
• Topband: choke/bleeder resistor on RXvertical?   Jamie WW3S
• Topband: choke/bleeder resistor on RXvertical?   Jamie WW3S
• Topband: Three Port Rx antenna splitter   Michael Walker
• Topband: launching lines over trees   Michael Walker
• Topband: Recomended Relays   Mike Waters
• Topband: Rather use N-type (was Re: The answer to PL-259 soldering/reliability problems)   Mike Waters
• Topband: Rather use N-type (was Re: The answer to PL-259   Mike Waters
• Topband: Fwd: Re: Rather use N-type (was Re: The answer to PL-259 soldering/reliability problems)   Mike Waters
• Topband: Rather use N-type (was Re: The answer to PL-259   Mike Waters
• Topband: Rather use N-type (was Re: The answer to PL-259   Mike Waters
• Topband: Rather use N-type (was Re: The answer to PL-259   Mike Waters
• Topband: Rather use N-type (was Re: The answer to PL-259   Mike Waters
• Topband: Rather use N-type (was Re: The answer to PL-259   Mike Waters
• Topband: Drone and pulley   Mike Waters
• Topband: Waller Flag   Mike Waters
• Topband: choke/bleeder resistor on RXvertical?   Mike Waters
• Topband: choke/bleeder resistor on RXvertical?   Mike Waters
• Topband: The archives search function doesn't work right   Mike Waters
• Topband: Updated Beverage antenna notes   Mike Waters
• Topband: Inverted L improvement question   Mike Waters
• Topband: choke/bleeder resistor on RXvertical?   Mike Waters
• Topband: Inverted L improvement question   Mike Waters
• Topband: Inverted L improvement question   Mike Waters
• Topband: Inverted L improvement question - Part 2   Mike Waters
• Topband: Need for capacitor   Mike Waters
• Topband: Fwd: Topband Digest, Vol 192, Issue 33   Mike Waters
• Topband: Inverted L improvement question - Part 2   Mike Waters
• Topband: Inverted L improvement question - Part 2   Mike Waters
• Topband: Topband Digest, Vol 192, Issue 33   Mike Waters
• Topband: "He invented the Waller flag, IIRC"   Mike Waters
• Topband: identifying noise source   Maciej Wieczorek
• Topband: Band Report   Tim Wininger
• Topband: Rather use N-type (was Re: The answer to PL-259 soldering/reliability problems)   James Wolf
• Topband: Waller Flag   James Wolf
• Topband: Inverted L improvement question   Jeff Woods
• Topband: Three Port Rx antenna splitter   Greg - ZL3IX
• Topband: Fwd: Re: Rather use N-type (was Re: The answer to PL-259 soldering/reliability problems)   F Z_Bruce
• Topband: Band Report   F Z_Bruce
• Topband: Updated Beverage antenna notes   F Z_Bruce
• Topband: Stew Perry Contest   F Z_Bruce
• Topband: Stew Perry Contest   F Z_Bruce
• Topband: V84SAA notes and suggestions - pls take a look - it may help u to work us on 160m!   k1zm at aol.com
• Topband: CT1ILT request   k1zm at aol.com
• Topband: Shunt feed procedure?   kr9u at arrl.net
• Topband: JAs on TopBand   w1tc at arrl.net
• Topband: new style PL-259's with screw on back INSTRUCTIONS   terry burge
• Topband: new style PL-259's with screw on back INSTRUCTIONS   terry burge
• Topband: new style PL-259's with screw on back INSTRUCTIONS   terry burge
• Topband: Rather use N-type (was Re: The answer to PL-259 soldering/reliability problems)   terry burge
• Topband: Rather use N-type (was Re: The answer to PL-259   terry burge
• Topband: capacity needed for Deturning tower   terry burge
• Topband: launching lines over trees   terry burge
• Topband: launching lines over trees   terry burge
• Topband: Rather use N-type (was Re: The answer to PL-259 soldering/reliability problems)   chacuff
• Topband: Rather use N-type (was Re: The answer to PL-259 soldering/reliability problems)   chacuff
• Topband: Rather use N-type (was Re: The answer to PL-259   chacuff
• Topband: JAs on TopBand   rgarrett5 at comcast.net
• Topband: Rather use N-type (was Re: The answer to PL-259   herr42
• Topband: Band Report   daraymond at iowatelecom.net
• Topband: Need for capacitor   daraymond at iowatelecom.net
• Topband: Need for capacitor   daraymond at iowatelecom.net
• Topband: Topband Digest, Vol 192, Issue 33   daraymond at iowatelecom.net
• Topband: FT8 - How it really works   jon jones
• Topband: Rather use N-type (was Re: The answer to PL-259   john at kk9a.com
• Topband: Rather use N-type (was Re: The answer to PL-259   john at kk9a.com
• Topband: 4.3 -10 Re: Rather use N-type (was Re: The answer to PL-259   john at kk9a.com
• Topband: Waller Flag   john at kk9a.com
• Topband: new style PL-259's with screw on back INSTRUCTIONS   chet moore
• Topband: Inverted L improvement question - Part 2   chet moore
• Topband: Tennis Ball launcher part list with links   kliegle at myfairpoint.net
• Topband: Rather use N-type (was Re: The answer to PL-259 soldering/reliability problems)   n4is at n4is.com
• Topband: Waller Flag   n4is at n4is.com
• Topband: Waller Flag   n4is at n4is.com
• Topband: capacity needed for Detuning tower   n4is at n4is.com
• Topband: Unofficial archive of the works from the early pioneers of Amateur Radio's digital communications era   n4is at n4is.com
• Topband: Inverted L improvement question   n4is at n4is.com
• Topband: Topband Digest, Vol 192, Issue 33   n4is at n4is.com
• Topband: Topband Digest, Vol 192, Issue 33   n4is at n4is.com
• Topband: Rather use N-type (was Re: The answer to PL-259 soldering/reliability problems)   ly2ij at qrz.lt
• Topband: 4.3 -10 Re: Rather use N-type (was Re: The answer to PL-259 soldering/reliability problems)   ly2ij at qrz.lt
• Topband: FT8 - How it really works   ly2ij at qrz.lt
• Topband: Russian 160 m contest   r7lv
• Topband: Recommended Relays   k3ky at radioprism.com
• Topband: 160 Antenna   kolson at rcn.com
• Topband: new style PL-259's with screw on back INSTRUCTIONS   fortra at siol.net
• Topband: Rather use N-type (was Re: The answer to PL-259 soldering/reliability problems)   donovanf at starpower.net
• Topband: Rather use N-type (was Re: The answer to PL-259 soldering/reliability problems)   donovanf at starpower.net
• Topband: Rather use N-type (was Re: The answer to PL-259   donovanf at starpower.net
• Topband: At least four more years of solar minimum?   donovanf at starpower.net
• Topband: At least four more years of solar minimum?   donovanf at starpower.net
• Topband: [CQ-Contest] At least four more years of solar minimum?   donovanf at starpower.net
• Topband: Rather use N-type (was Re: The answer to PL-259   donovanf at starpower.net
• Topband: Waller Flag   donovanf at starpower.net
• Topband: ARRL DXCC - 160 Meters   uy0zg
• Topband: ARRL DXCC - 160 Meters   uy0zg
• Topband: Rather use N-type (was Re: The answer to PL-259   vk2wf
• Topband: choke/bleeder resistor on RXvertical?   w5zn at w5zn.org
• Topband: Might be a good EU DX night   w5zn at w5zn.org
• Topband: Might be a good EU DX night   w5zn at w5zn.org

Last message date: Mon Dec 31 22:46:55 EST 2018
Archived on: Mon Dec 31 22:47:00 EST 2018

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...