February 2014 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sat Feb 1 03:56:57 EST 2014
Ending: Fri Feb 28 20:51:10 EST 2014
Messages: 279

• [Amps] AL-1200 T/R problem   Roger (K8RI)
  • [Amps] AL-1200 T/R problem   Fern
    • [Amps] AL-1200 T/R problem   Joe Subich, W4TV
  • [Amps] AL-1200 T/R problem   Jim Thomson
• [Amps] Non-linear linear   Jim Thomson
  • [Amps] Non-linear linear   Joe Subich, W4TV
• [Amps] Recommended Tuner for Clipperton L   qrv at kd4e.com
  • [Amps] Recommended Tuner for Clipperton L   Roger (K8RI)
    • [Amps] Recommended Tuner for Clipperton L   Carl
      • [Amps] Recommended Tuner for Clipperton L   Roger (K8RI)
      • [Amps] Recommended Tuner for Clipperton L   qrv at kd4e.com
      • [Amps] Recommended Tuner for Clipperton L   Roger (K8RI)
      • [Amps] Recommended Tuner for Clipperton L   qrv at kd4e.com
      • [Amps] Recommended Tuner for Clipperton L   Roger (K8RI)
      • [Amps] Recommended Tuner for Clipperton L   Richard Solomon
      • [Amps] Recommended Tuner for Clipperton L   qrv at kd4e.com
      • [Amps] Recommended Tuner for Clipperton L   Roger (K8RI)
      • [Amps] Recommended Tuner for Clipperton L   Carl
  • [Amps] Recommended Tuner for Clipperton L   peter chadwick
• [Amps] Vacuum relay needed   Jim Garland
  • [Amps] Vacuum relay needed   donroden at hiwaay.net
    • [Amps] Vacuum relay needed   qrv at kd4e.com
  • [Amps] Vacuum relay needed   peter chadwick
  • [Amps] Vacuum relay needed   Mike McCarthy, W1NR
    • [Amps] Vacuum relay needed   Jim Garland
• [Amps] Air temps leaving the amp.   Gary Smith
  • [Amps] Air temps leaving the amp.   Roger (K8RI)
    • [Amps] Air temps leaving the amp.   Jim Garland
      • [Amps] Air temps leaving the amp.   Al Kozakiewicz
      • [Amps] Air temps leaving the amp.   Roger (K8RI)
      • [Amps] Air temps leaving the amp.   Carl
      • [Amps] Air temps leaving the amp.   Al Kozakiewicz
      • [Amps] Air temps leaving the amp.   KA4INM
      • [Amps] Air temps leaving the amp.   MU 4CX250B
      • [Amps] Air temps leaving the amp.   qrv at kd4e.com
      • [Amps] FW: Air temps leaving the amp.   Matt
  • [Amps] Air temps leaving the amp.   Jim Thomson
  • [Amps] Air temps leaving the amp.   Bill Turner
  • [Amps] FW: Air temps leaving the amp.   Matt
    • [Amps] FW: Air temps leaving the amp.   Carl
      • [Amps] FW: FW: Air temps leaving the amp.   Matt
  • [Amps] Air temps leaving the amp.   peter chadwick
• [Amps] Turns counters   radio at modesgate.com
  • [Amps] Turns counters   Robert Mccormack
• [Amps] 6 meter plate choke   Ron Ellis
• [Amps] building an an758 questions   dan
• [Amps] FW: FW: Air temps leaving the amp   Steve
  • [Amps] FW: FW: FW: Air temps leaving the amp   Matt
    • [Amps] FW: FW: FW: Air temps leaving the amp   Carl
• [Amps] Update on AL-1200 T/R Problem   Ken Asmus
  • [Amps] Update on AL-1200 T/R Problem   Carl
  • [Amps] Update on AL-1200 T/R Problem   Jim W7RY
• [Amps] SB-200 Plate Choke for 6 meters   Dennis W0JX
  • [Amps] SB-200 Plate Choke for 6 meters   Bill Turner
• [Amps] transistor mounting question   dan
  • [Amps] transistor mounting question   Saandy
• [Amps] 3CX1500A7 versus 3CPX1500A7   Larry Critchfield
  • [Amps] 3CX1500A7 versus 3CPX1500A7   Carl
  • [Amps] 3CX1500A7 versus 3CPX1500A7   Robert Morris
    • [Amps] 3CX1500A7 versus 3CPX1500A7   Glen Zook
    • [Amps] 3CX1500A7 versus 3CPX1500A7   Alek Petkovic
    • [Amps] 3CX1500A7 versus 3CPX1500A7   Robert Morris
• [Amps] Right angle drive   kf8od at aol.com
• [Amps] AL-811H plate voltage   Tom Osborne
  • [Amps] AL-811H plate voltage   Carl
  • [Amps] AL-811H plate voltage   Robert Groh
• [Amps] Solid State Relays Again   Jim W7RY
  • [Amps] Solid State Relays Again   Jim Garland
    • [Amps] Solid State Relays Again   Roger (K8RI)
  • [Amps] Solid State Relays Again   Paul Christensen
  • [Amps] Solid State Relays Again   KA4INM
    • [Amps] Solid State Relays Again   donroden at hiwaay.net
      • [Amps] Solid State Relays Again   Jeff Blaine
  • [Amps] Solid State Relays Again   TexasRF at aol.com
    • [Amps] Solid State Relays Again   Robert Groh
    • [Amps] Solid State Relays Again   Peter Voelpel
      • [Amps] Solid State Relays Again   donroden at hiwaay.net
    • [Amps] Solid State Relays Again   Paul Christensen
  • [Amps] Solid State Relays Again   Paul Kraemer
  • [Amps] Solid State Relays Again   peter chadwick
    • [Amps] Solid State Relays Again   donroden at hiwaay.net
      • [Amps] Harris RF 102A   Jack Taylor
      • [Amps] Harris RF 102A   ros
      • [Amps] Solid State Relays Again   Mike Lucas
      • [Amps] Solid State Relays Again   Jeff Blaine
      • [Amps] Solid State Relays Again   Mike
      • [Amps] Solid State Relays Again   Roger (K8RI)
  • [Amps] Solid State Relays Again   TexasRF at aol.com
    • [Amps] Solid State Relays Again   Roger (K8RI)
      • [Amps] Solid State Relays Again   Larry Benko
      • [Amps] Solid State Relays Again   Paul Christensen
  • [Amps] Solid State Relays Again   peter chadwick
  • [Amps] Solid State Relays Again   Paul Hewitt
  • [Amps] Solid State Relays Again   Beefus
• [Amps] Crouzet SSR - FAQs   Paul Kraemer
  • [Amps] Crouzet SSR - FAQs   Jim Thomson
    • [Amps] Crouzet SSR - FAQs   Roger (K8RI)
  • [Amps] Crouzet SSR - FAQs   TexasRF at aol.com
• [Amps] SSR   peter chadwick
• [Amps] Solid state relays..again   Jim Thomson
  • [Amps] Solid state relays..again   Roger (K8RI)
  • [Amps] Solid state relays..again   John K Gotwals
    • [Amps] Solid state relays..again   Roger (K8RI)
  • [Amps] Solid state relays..again   Manfred Mornhinweg
    • [Amps] Solid state relays..again   Ken Durand
      • [Amps] Solid state relays..again   Jim W7RY
      • [Amps] Solid state relays..again   Brian Carling
  • [Amps] Solid state relays..again   TexasRF at aol.com
    • [Amps] Solid state relays..again   Jeff Blaine
  • [Amps] Solid state relays..again   Manfred Mornhinweg
    • [Amps] Solid state relays..again   MU 4CX250B
• [Amps] 9500 fault 6 ?   Charles Harpole
• [Amps] Umac 606   Colin Lamb
  • [Amps] Umac 606   donroden at hiwaay.net
    • [Amps] Umac 606   Alek Petkovic
  • [Amps] Umac 606   Barrie - Yellowstone Photo
  • [Amps] Umac 606   Bill Turner
• [Amps] Amps Digest, Vol 134, Issue 23   Gary Smith
• [Amps] Force cooled heatsink aerodynamics   Alan Ibbetson
  • [Amps] Force cooled heatsink aerodynamics   Bill Turner
  • [Amps] Force cooled heatsink aerodynamics   Alan Ibbetson
    • [Amps] Force cooled heatsink aerodynamics   Bill Turner
  • [Amps] Force cooled heatsink aerodynamics   Markku Oksanen
    • [Amps] Force cooled heatsink aerodynamics   Fuqua, Bill L
      • [Amps] Force cooled heatsink aerodynamics   Fuqua, Bill L
  • [Amps] Force cooled heatsink aerodynamics   Markku Oksanen
    • [Amps] Force cooled heatsink aerodynamics   Roger (K8RI)
• [Amps] AL-811H resistors   Tom Osborne
  • [Amps] AL-811H resistors   Carl
  • [Amps] AL-811H resistors   Tom Osborne
  • [Amps] AL-811H resistors   Robert Groh
• [Amps] 100+100uF 500VDC MLytic Dual High Voltage Capacitor?   qrv at kd4e.com
  • [Amps] 100+100uF 500VDC MLytic Dual High Voltage Capacitor?   Carl
  • [Amps] 100+100uF 500VDC MLytic Dual High Voltage Capacitor?   peter chadwick
    • [Amps] 100+100uF 500VDC MLytic Dual High Voltage Capacitor?   Alek Petkovic
      • [Amps] 100+100uF 500VDC MLytic Dual High Voltage Capacitor?   qrv at kd4e.com
    • [Amps] 100+100uF 500VDC MLytic Dual High Voltage Capacitor?   Carl
• [Amps] Breakdown tester, RM 215 L2   Denis Jackson
  • [Amps] Breakdown tester, RM 215 L2   peter chadwick
  • [Amps] Breakdown tester, RM 215 L2   Steve Thompson
  • [Amps] Breakdown tester, RM 215 L2   Vic Rosenthal K2VCO
  • [Amps] Breakdown tester, RM 215 L2   Chris Wilson
• [Amps] Plate Voltage Not Stable   Ken Durand
  • [Amps] Plate Voltage Not Stable   Paul Baldock
  • [Amps] Plate Voltage Not Stable   Carl
    • [Amps] Plate Voltage Not Stable   Carl
      • [Amps] Plate Voltage Not Stable   Roger (K8RI)
• [Amps] CISCO WS-CAC-2500W PSU a few questions   Conrad Farlow
  • [Amps] CISCO WS-CAC-2500W PSU a few questions   Col. Paul E. Cater
• [Amps] Clipperton L meter   k4pdm
  • [Amps] Clipperton L meter   k4pdm
  • [Amps] Clipperton L meter   k4pdm
  • [Amps] Clipperton L meter   Carl
• [Amps] A Professionally Built Amplifier Claim   Jim W7RY
  • [Amps] A Professionally Built Amplifier Claim   Glen Zook
    • [Amps] A Professionally Built Amplifier Claim   Brian Carling
    • [Amps] A Professionally Built Amplifier Claim   Roger (K8RI)
  • [Amps] A Professionally Built Amplifier Claim   Carl
• [Amps] Sb200 plate impedance   Ian Swain
  • [Amps] Sb200 plate impedance   Carl
    • [Amps] Sb200 plate impedance   Fuqua, Bill L
• [Amps] L4B supply   mikflathead at aol.com
  • [Amps] L4B supply   Carl
    • [Amps] L4B supply   Paul Baldock
  • [Amps] L4B supply   Carl
    • [Amps] L4B supply   Paul Baldock
  • [Amps] L4B supply   Jim Thomson
• [Amps] Sources for 3PDT RF Relay - Rated 15KW+   qrv at kd4e.com
  • [Amps] Sources for 3PDT RF Relay - Rated 15KW+   qrv at kd4e.com
  • [Amps] Sources for 3PDT RF Relay - Rated 15KW+   Jim Thomson
    • [Amps] Sources for 3PDT RF Relay - Rated 15KW+   qrv at kd4e.com
      • [Amps] Sources for 3PDT RF Relay - Rated 15KW+   qrv at kd4e.com
• [Amps] Drake   thomas haglund
  • [Amps] Drake   Paul Baldock
• [Amps] Alpha 9500 quirks   Charles Harpole
  • [Amps] Alpha 9500 quirks   Kees - pa7two
• [Amps] MLA 2500 WO tubes   Dennis n5dpk
  • [Amps] MLA 2500 WO tubes   Dennis Kippa
• [Amps] Acom 1500 v Alpha 9500 quirks   peter chadwick
• [Amps] Fan Noise in GS-35b Amplifiers   Jack C. Shutt
  • [Amps] Fan Noise in GS-35b Amplifiers   Bill Turner
  • [Amps] Fan Noise in GS-35b Amplifiers   N1BUG
    • [Amps] Fan Noise in GS-35b Amplifiers   mikflathead at aol.com
      • [Amps] Fan Noise in GS-35b Amplifiers   Jack C. Shutt
      • [Amps] Fan Noise in GS-35b Amplifiers   Roger
    • [Amps] Fan Noise in GS-35b Amplifiers   Jack C. Shutt
      • [Amps] Fan Noise in GS-35b Amplifiers   Roger (K8RI)
    • [Amps] Fan Noise in GS-35b Amplifiers   Carl
      • [Amps] Fan Noise in GS-35b Amplifiers   donroden at hiwaay.net
      • [Amps] Fan Noise in GS-35b Amplifiers   Glen Zook
    • [Amps] Fan Noise in GS-35b Amplifiers   Roger
  • [Amps] Fan Noise in GS-35b Amplifiers   TexasRF at aol.com
    • [Amps] Fan Noise in GS-35b Amplifiers   k7fm
    • [Amps] Fan Noise in GS-35b Amplifiers   Roger (K8RI)
      • [Amps] Fan Noise in GS-35b Amplifiers   Carl
  • [Amps] Fan Noise in GS-35b Amplifiers   peter chadwick
  • [Amps] Fan Noise in GS-35b Amplifiers   John G3UUT
    • [Amps] Fan Noise in GS-35b Amplifiers   Carl
• [Amps] HB amp shakedown cruise   Jim Garland
  • [Amps] HB amp shakedown cruise   Philip Townsend Lontz
• [Amps] Stuff for sale, prices reduced   Vic Rosenthal K2VCO
• [Amps] Fan Noise in GS-35B Amplifiers.   Robert Briggs
• [Amps] QRO operation into a 80 meter vertical   donroden at hiwaay.net
  • [Amps] QRO operation into a 80 meter vertical   Carl
  • [Amps] QRO operation into a 80 meter vertical   Brian Carling
    • [Amps] QRO operation into a 80 meter vertical   Carl
  • [Amps] QRO operation into a 80 meter vertical   peter chadwick
    • [Amps] QRO operation into a 80 meter vertical   Mark Beckwith
      • [Amps] QRO operation into a 80 meter vertical   donroden at hiwaay.net
      • [Amps] QRO operation into a 80 meter vertical   Vic Rosenthal K2VCO
      • [Amps] QRO operation into a 80 meter vertical   Carl
      • [Amps] QRO operation into a 80 meter vertical   Jim Brown
    • [Amps] QRO operation into a 80 meter vertical   Carl
  • [Amps] QRO operation into a 80 meter vertical   peter chadwick
• [Amps] More 9500 tips   Charles Harpole
• [Amps] More on server supplies   Conrad Farlow
  • [Amps] More on server supplies   Brian Carling
• [Amps] Shipping SB200 with Tube Installed   Jim W7RY
  • [Amps] Shipping SB200 with Tube Installed   Eddy Swynar
  • [Amps] Shipping SB200 with Tube Installed   RAY FRIESS
  • [Amps] Shipping SB200 with Tube Installed   Carl
    • [Amps] Shipping SB200 with Tube Installed   donroden at hiwaay.net
• [Amps] Duty cycle for processed SSB in contest conditions?   Conrad Farlow
  • [Amps] Duty cycle for processed SSB in contest conditions?   Bill Turner
  • [Amps] Duty cycle for processed SSB in contest conditions?   Carl
  • [Amps] Duty cycle for processed SSB in contest conditions?   Roger (K8RI)
  • [Amps] Duty cycle for processed SSB in contest conditions?   peter chadwick
    • [Amps] Duty cycle for processed SSB in contest conditions?   Roger (K8RI)
    • [Amps] Duty cycle for processed SSB in contest conditions?   Karl-Arne Markström
  • [Amps] Duty cycle for processed SSB in contest conditions?   Steve Thompson
  • [Amps] Duty cycle for processed SSB in contest conditions?   peter chadwick
  • [Amps] Duty cycle for processed SSB in contest conditions?   peter chadwick
• [Amps] HV Fuses   Jim Garland
  • [Amps] HV Fuses   KA4INM
• [Amps] Working on my Darwin award   Vic Rosenthal K2VCO
  • [Amps] Working on my Darwin award   Bill Turner
    • [Amps] Working on my Darwin award   Paul Christensen
      • [Amps] Working on my Darwin award   Bill Turner
      • [Amps] Another Re: Working on my Darwin award   Roger (K8RI)
      • [Amps] Working on my Darwin award   Paul Christensen
      • [Amps] Working on my Darwin award   Fuqua, Bill L
      • [Amps] Working on my Darwin award   Carl
      • [Amps] Working on my Darwin award   Bill Turner
      • [Amps] Working on my Darwin award   Bill Turner
      • [Amps] Working on my Darwin award   Tom Osborne
      • [Amps] Working on my Darwin award   Vic Rosenthal K2VCO
      • [Amps] Working on my Darwin award   n8de at thepoint.net
      • [Amps] Working on my Darwin award   Tom Osborne
      • [Amps] Working on my Darwin award   Gary Smith
  • [Amps] Working on my Darwin award   Carl
    • [Amps] Working on my Darwin award   Vic Rosenthal
  • [Amps] Working on my Darwin award   Don Jones
  • [Amps] Working on my Darwin award   Manfred Mornhinweg
    • [Amps] Working on my Darwin award   Vic Rosenthal K2VCO
      • [Amps] Working on my Darwin award   Roger (K8RI)
  • [Amps] Working on my Darwin award   peter chadwick
    • [Amps] Working on my Darwin award   Roger (K8RI)
    • [Amps] Working on my Darwin award   k7fm
      • [Amps] Working on my Darwin award   Roger (K8RI)
  • [Amps] Working on my Darwin award   Manfred Mornhinweg
    • [Amps] Working on my Darwin award   Brian Carling
  • [Amps] Working on my Darwin award   peter chadwick
• [Amps] to part out or to sell as whole   ka1mwp
• [Amps] Simpson Panel Mtr Wanted   Jim Garland
  • [Amps] Simpson Panel Mtr Wanted   Radio WC6W
• [Amps] Test   Ian White
• [Amps] Eimac 8877   Dennis Homerick
  • [Amps] Eimac 8877   Gary Smith
    • [Amps] Eimac 8877   Carl
• [Amps] Cool Amp Silver Plating   Hardy Landskov
  • [Amps] Cool Amp Silver Plating   Fuqua, Bill L
    • [Amps] Cool Amp Silver Plating   MU 4CX250B
    • [Amps] Cool Amp Silver Plating   KA4INM
  • [Amps] Cool Amp Silver Plating   peter chadwick
    • [Amps] Cool Amp Silver Plating   Carl
      • [Amps] Cool Amp Silver Plating   Paul Christensen
  • [Amps] Cool Amp Silver Plating   Roger
  • [Amps] Cool Amp Silver Plating   Dick Hanson
    • [Amps] Cool Amp Silver Plating   Fuqua, Bill L

Last message date: Fri Feb 28 20:51:10 EST 2014
Archived on: Mon Mar 3 10:11:54 EST 2014

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...