October 2012 Archives by thread
Starting: Mon Oct 1 11:04:57 EDT 2012
Ending: Wed Oct 31 23:26:54 EDT 2012
Messages: 430
- [TowerTalk] building a 1500' tower video
bill ny9h
- [TowerTalk] oops,,, better address for building a tower ....
bill ny9h
- [TowerTalk] THANKS....Phased Verticals 40m......
Jim Brown
- [TowerTalk] Fw: Steel Antenna, Windmill, Hamm Radio, Towers - $300 (Buffalo )
Kathy Bookmiller
- [TowerTalk] Tailtwister
Cqtestk4xs at aol.com
- [TowerTalk] Lightning protection and control wires
Larry Loen
- [TowerTalk] lightening protection
Wayne Crawford
- [TowerTalk] Feeder spacing
Hans Hammarquist
- [TowerTalk] Motorize LM-470 Tilt-Over
Richard Solomon
- [TowerTalk] Aligning rotor, mast and thrust bearing
Rick Kiessig
- [TowerTalk] Guying a TX-472 bottom section
SPWoo
- [TowerTalk] Inverted V on a retractable tower
SPWoo
- [TowerTalk] SSV site question
Entertainment Innovations
- [TowerTalk] Coax radius
Mike
- [TowerTalk] EZNEC Model for Mosley Pro-57B or Pro-67C3
David Gilbert
- [TowerTalk] Green Heron RT-21/21D Rotor Controllers
k7hph at q.com
- [TowerTalk] What is this?
Dave Cole
- [TowerTalk] Same question for the RC1-H
Dave Cole
- [TowerTalk] Inverted V on a retractable tower (David Thompson)
Spencer
- [TowerTalk] Putting a rotor in a crank-up?
Steve Jones
- [TowerTalk] TowerTalk Digest, Vol 118, Issue 9
W4ABW at aol.com
- [TowerTalk] Wanted: ring rotor (parts unit okay)
Rob Frohne
- [TowerTalk] Why galvanized crank up cables instead of stainless?
Richard (Rick) Karlquist
- [TowerTalk] Changing cables
Michael Goins
- [TowerTalk] FW: Why galvanized crank up cables instead of stainless?
KM5VI
- [TowerTalk] Yaesu 800DXA Followup
Mark Adams
- [TowerTalk] Replacing crank up tower cables
Marv Shelton
- [TowerTalk] Urgent: Should solar panel array be grounded to station ground and/or house ground?
John W
- [TowerTalk] Grounding question...
Dave Cole
- [TowerTalk] Rotor Loop
KD0Q-Glenn
- [TowerTalk] Telrex 20M-546
Mike
- [TowerTalk] Velocity factor of Coax
Michael Zeglen
- [TowerTalk] Rotor Pal QST
Wayne Kline
- [TowerTalk] Stubs
Tom Osborne
- [TowerTalk] 800 SDX Connectors
Jerry
- [TowerTalk] 80 meter Delta Loop on 40
rfman45
- [TowerTalk] 80 Meter Delta Loop
Dennis W0JX
- [TowerTalk] loop antenna
Spencer
- [TowerTalk] Yaesu 800DXA Followup- FINAL
Mark Adams
- [TowerTalk] Motorized MA-550 tower will not retract
John Banbury
- [TowerTalk] m2inc online store down?
Jorge Diez - CX6VM
- [TowerTalk] Permit finally!
Dave Cole
- [TowerTalk] Tower progress and build log
Rick Kiessig
- [TowerTalk] Grounding...
Dave Cole
- [TowerTalk] Yet another worm gear box failure...
Dino Darling
- [TowerTalk] Testing Yagi at ground level
Dan Bookwalter
- [TowerTalk] Water pipe as a mast
Dan Bookwalter
- [TowerTalk] Choice of aluminum
Rudy Bakalov
- [TowerTalk] 50-60 ft aliminium self supporting tower diagram needed
Jorge Diez - CX6VM
- [TowerTalk] Aluminum for 80m vertical
jcjacobsen at q.com
- [TowerTalk] Waterpipe Mast
Wilson Lamb
- [TowerTalk] Choice of aluminum, 80m vertical.
k3hx at juno.com
- [TowerTalk] Fw: Testing Yagi at ground level
Fernando EC1CT
- [TowerTalk] tower height
mikflathead at aol.com
- [TowerTalk] tower height repost
mikflathead at aol.com
- [TowerTalk] Nested 4SQs
Rudy Bakalov
- [TowerTalk] Looking for a remote coax swithc
Rene Correa, K5JX
- [TowerTalk] Man-lifts
Howard Hoyt
- [TowerTalk] DXE 4SQ question!!!
Jorge Diez - CX6VM
- [TowerTalk] 80m Delta loop Question
Carol Richards
- [TowerTalk] Tower removal. Gin Pole or something else?
Mike Lyon
- [TowerTalk] FW: If you had a choice
Michael Zeglen
- [TowerTalk] If you had a choice
Ward Silver
- [TowerTalk] TowerTalk If you had a choice
K7LXC at aol.com
- [TowerTalk] TowerTalk Digest, Vol 118, Issue 35
Ro Grrr
- [TowerTalk] BX tower grounding connector
Missouri Guy
- [TowerTalk] 150 foot tower
Peter Helder
- [TowerTalk] Antenna Testing
Ward Silver
- [TowerTalk] Prosistel PST61 and M2 20M5
Jorge Diez - CX6VM
- [TowerTalk] (no subject)
K2GN
- [TowerTalk] Antenna clamps
wayne wright
- [TowerTalk] Some information:
K8RI
- [TowerTalk] FW:
James McLaughlin
- [TowerTalk] Experts
Howard Hoyt
- [TowerTalk] Crank up tower bracing rubbing against cable
SPWoo
- [TowerTalk] Greasing the Tilt-over Bolts on a tilt-over tower
Larry Loen
- [TowerTalk] Balun for an elevated vertical
Cqtestk4xs at aol.com
- [TowerTalk] TH-2 Large SWR changes during day
Brian Alsop
- [TowerTalk] Topband: 160 meter elevated vertical
Cqtestk4xs at aol.com
- [TowerTalk] Solenoid or Binocular configuration?
K8RI
- [TowerTalk] Tail Twister rotor
mikflathead at aol.com
- [TowerTalk] Ham 3 Rotor Wiring
Tom Martin
- [TowerTalk] HAM 3 Wiring
Tom Martin
- [TowerTalk] looking for 3/16 EHS guy wire supplier in CA AZ or NV
Hector Garcia XE2K
- [TowerTalk] Beta match adds capacitive reactance on 2 el Hy-gain 40m ?
DX Supply AB
- [TowerTalk] Beta match adds capacitive reactance on 2 el Hy-gain 40m
DX Supply AB
- [TowerTalk] Johnson 132 or similar insulators wanted
John Becker
- [TowerTalk] 7/8" Connectors
K0YR Thomas Rieff
- [TowerTalk] Old Mosley PRO 37
Yuri
- [TowerTalk] Rohn 45g
les
- [TowerTalk] Calibrating antenna direction and using chokes with a beam
Rick Kiessig
- [TowerTalk] Common-mode choke for remote tuner
Phil Zminda
- [TowerTalk] AS455G rotor plate stuck in tower section....
Rob Frohne
- [TowerTalk] Guy Rope Knot
Kelley Shaddrick
- [TowerTalk] Beta match adds capacitive reactance on 2 el Hy-gain 40m (reply)
Scott Yost
- [TowerTalk] Another rope question ??
Gerard Jendraszkiewicz
- [TowerTalk] TEMPERATURE COMPENSATED GUY WIRE TENSION FORMULA
De La Vega, Fernando
- [TowerTalk] Strength of chrome moly
Andrew J. Buckler (BBMSC)
- [TowerTalk] Rotor question
Gregg Seidl
- [TowerTalk] Andrew Heliax connectors for sale
mikflathead at aol.com
- [TowerTalk] rotation limiter lever
Peter Helder
- [TowerTalk] Coax Matching Stubs W/Smith Chart
Bob K6UJ
- [TowerTalk] 43 feet pole for vertical
Hans Hammarquist
Last message date:
Wed Oct 31 23:26:54 EDT 2012
Archived on: Wed Oct 31 23:27:01 EDT 2012
This archive was generated by
Pipermail 0.09 (Mailman edition).