2001-October Archives by Thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Mon Oct 1 01:03:06 2001
Ending: Wed Oct 31 23:05:41 2001
Messages: 524

• [AMPS] transformer oil   Ken Barber
  • [AMPS] transformer oil   Mike
• [AMPS] transformer oil   2
• Fw: [AMPS] transformer oil   Mike Sawyer
• [AMPS] Noises in electrolytic capacitors   K4SO@aol.com
• [AMPS] transformer oil   wb8jkr@juno.com
• FW: [AMPS] 866A replacement .... SEMTECH STR4B32 ... any data ple ase   Steve Katz
• [AMPS] Special power-up on old unused AL-1200?   Jerry Flanders
  • [AMPS] Special power-up on old unused AL-1200?   Peter Frenning, OZ1PIF
  • [AMPS] Special power-up on old unused AL-1200?   Tom Rauch
• [AMPS] Henry 4K Ultra vs. 3K Classic X Mk II   Mike Wapner
• [AMPS] Help with GS35B.   engelen.jan
• [AMPS] YC-156 Input impedance   KD4LYH
  • [AMPS] YC-156 Input impedance   Phil Clements
    • [AMPS] YC-156 Input impedance   PAUL HEWITT
      • [AMPS] YC-156 Input impedance   Phil Clements
      • [AMPS] YC-156 Input impedance   Tom Rauch
      • [AMPS] YC-156 Input impedance   PAUL HEWITT
      • [AMPS] YC-156 Input impedance   Tom Rauch
      • [AMPS] YC-156 Input impedance   PAUL HEWITT
• [AMPS] Locate SB220 Resistors   Ralph A. Bellas
• [AMPS] YC-156 Input Impedance   KD4LYH
• [AMPS] Henry 4K Ultra vs. 3K Classic X Mk II   2
• [AMPS] Noises in electrolytic capacitors   2
  • [AMPS] Noises in electrolytic capacitors   Lamb
    • [AMPS] Noises in electrolytic capacitors   Tom Rauch
  • [AMPS] Noises in electrolytic capacitors   Phil (VA3UX)
    • [AMPS] Noises in electrolytic capacitors   Tom Rauch
      • [AMPS] Noises in electrolytic capacitors   Barry Kirkwood
      • [AMPS] Noises in electrolytic capacitors   Phil (VA3UX)
      • [AMPS] Noises in electrolytic capacitors   Tom Rauch
• [AMPS] Henry 4K Ultra vs. 3K Classic X Mk II   bill thomas
• [AMPS] Henry 4K Ultra vs. 3K Classic X Mk II   Steve Katz
• [AMPS] transformer oil revisited   Ken Barber
• [AMPS] transformer oil revisited   pringle50@home.com
• [AMPS] transformer oil   Ken Barber
• [AMPS] SELL: 6m deck components   Ronald Lumachi
• [AMPS] Noises in electrolytic capacitors   2
• [AMPS] Noises in electrolytic capacitors   2
• [AMPS] Henry 4K Ultra vs. 3K Classic X Mk II   2
• [AMPS] SB-220   J Kolin
  • [AMPS] SB-220   Phil Levin W2GE
• [AMPS] Problem with AL-811H   Wt8r@aol.com
• [AMPS] Noises in electrolytic capacitors   K4SO@aol.com
• [AMPS] Xfmr Oil   John T. M. Lyles
  • [AMPS] Xfmr Oil   Michael Melland
• [AMPS] Henry 4K Ultra vs. 3K Classic X Mk II   Steve Katz
• [AMPS] Problem with AL-811H   Steve Katz
  • [AMPS] Problem with AL-811H   carl seyersdahl
    • [AMPS] Problem with AL-811H   Tom Rauch
    • [AMPS] Problem with AL-811H   Phil Clements
• [AMPS] SB-220   Steve Katz
• [AMPS] SB-220   wb8jkr@juno.com
• [AMPS] SB-220   2
• [AMPS] Noises in electrolytic capacitors   2
  • [AMPS] Re: Darwinian selection: was : Noises in electrolytic capacitors   George T. Daughters
    • [AMPS] Re: Darwinian selection: was : Noises in electrolytic capacitors   Ron D. Rossi
• [AMPS] SB-220   Steve Katz
  • [AMPS] SB-220   Doug Hall
    • [AMPS] SB-220   Phil Clements
      • [AMPS] SB-220   Tom Rauch
• [AMPS] YC-156 Input impedance   Phil Clements
• [AMPS] YC-156 Input impedance   Phil Clements
  • [AMPS] YC-156 Input impedance   Tom Rauch
• [AMPS] SB-220   Steve Katz
• [AMPS] Re: Darwinian selection: was : Noises in electrolytic capacitors   2
• [AMPS]   Bill English
• [AMPS] SB-220   Steve Katz
• [AMPS] Problem with AL-811H   Wt8r@aol.com
• [AMPS] Noises in electrolytic capacitors   Steve Thompson
• [AMPS] YC-156 Input impedance   Phil
• [AMPS] RF Electronics shut-down and more info   Scott Townley
• [AMPS] Problem with AL-811H   2
• [AMPS] Noises in electrolytic capacitors   2
• [AMPS] DOD006 / RCA-7213 Tubes   Phil
  • [AMPS] DOD006 / RCA-7213 Tubes   Ian White, G3SEK
• [AMPS] vom check of 3-500Z tubes   Jim Spears
  • [AMPS] vom check of 3-500Z tubes   Tom Rauch
• [AMPS] ALPHA 374A   Bill Smith
• [AMPS] vom check of 3-500Z tubes   2
• [AMPS]   Bill English
• [AMPS] 500 pf 6kv Ceramic Disc Capacitors   Bill Smith
• [AMPS] re al1500   kenneth m cubilo
• [AMPS] re al1500   Phil Levin W2GE
• [AMPS] ALPHA 374A   Steve Katz
  • [AMPS] ALPHA 374A   Terry Gaiser
• [AMPS] re al1500   2
• [AMPS]   2
  • [AMPS]   chuck
• [AMPS] RE Henry 2K4   Bill English
• [AMPS] ALPHA 374A   Steve Katz
  • [AMPS] ALPHA 374A   Phil Clements
  • [AMPS] ALPHA 374A   Terry Gaiser
• [AMPS]   2
• [AMPS] vom check of 3-500Z tubes   2
  • [AMPS] vom check of 3-500Z tubes   Ron D. Rossi
• [AMPS] ALPHA 374A   Steve Katz
• [AMPS] ALPHA 374A   Tim Kass
  • [AMPS] ALPHA 374A   Paul Christensen
• [AMPS] ALPHA 374A   Steve Katz
• [AMPS] GS-35B HF Schematic   Phil Levin W2GE
  • [AMPS] GS-35B HF Schematic   Gintaras
• [AMPS]   chuck
• [AMPS] vom check of 3-500Z tubes   2
• [AMPS]   2
• [AMPS] Fan   Steve Katz
  • [AMPS] Re: [amps] Fans and Henry Kissinger   Phil Clements
• [AMPS] Fan   Xu
  • [AMPS] Fan->make correct and 8877 vs GS35   Xu
    • [AMPS] Fan->make correct and 8877 vs GS35   yo9fzs
• [AMPS] Re: [HomeBrew] Fan->make correct and 8877 vs GS35   John Kirk
  • [AMPS] Re: [HomeBrew] Fan->make correct and 8877 vs GS35   Ian White, G3SEK
• [AMPS] Tuned Input Circuit Q   KD4LYH
  • [AMPS] Tuned Input Circuit Q   Tom Rauch
    • [AMPS] Tuned Input Circuit Q   Phil Clements
    • [AMPS] Tuned Input Circuit Q   Arthur Moe
• [AMPS] Re FAN   Xu
• [AMPS] RF Concepts 2-417 amp   Bill Starks
• [AMPS] 4.7M resistors   Ralph A. Bellas
• [AMPS]   Wt8r@aol.com
  • [AMPS]   chuck
• [AMPS] Tuned Input Circuit Q   2
  • [AMPS] Tuned Input Circuit Q   Phil Clements
• [AMPS]   2
• [AMPS] Tuned Input Circuit Q   2
• [AMPS] Tuned Input Circuit Q   2
• [AMPS]   Wt8r@aol.com
  • [AMPS]   chuck
• [AMPS]   2
  • [AMPS]   chuck
• [AMPS]   2
• [AMPS]   2
• [AMPS]   2
• [AMPS]   Wt8r@aol.com
• [AMPS] tube-6156   Carl & Kim Styan
  • [AMPS] tube-6156   Peter Frenning, OZ1PIF
• [AMPS] Fw: tube-6156   Carl & Kim Styan
• [AMPS] WTB 51J4   John Lyles
• [AMPS] Finding the Q of a Coil   Bill Smith
  • [AMPS] Finding the Q of a Coil   Ian White, G3SEK
  • [AMPS] Finding the Q of a Coil   Phil (VA3UX)
    • [AMPS] Finding the Q of a Coil   Ian White, G3SEK
      • [AMPS] Finding the Q of a Coil   Tom Rauch
  • [AMPS] Finding the Q of a Coil   Maurizio Panicara
• [AMPS] Fw: tube-6156   Carl & Kim Styan
• [AMPS] SB-220 cooling/filaments   Pete Smith
• [AMPS] Finding the Q of a Coil   Steve Thompson
• [AMPS] Finding the Q of a Coil   2
• [AMPS] SB-220 cooling/filaments   2
• [AMPS] Deoxit/ProGold   Pete Smith
• [AMPS] LK-8877   Mark Michel
• [AMPS] CIRCUIT BREAKER FOR TRANSFORMER PRIMARY CIRCUIT   ToddRoberts2001@aol.com
• [AMPS] Deoxit/ProGold   2
• [AMPS] Finding the Q of a Coil   2
• [AMPS] Tuned Input Circuit Q   2
  • [AMPS] Tuned Input Circuit Q   Phil Clements
• [AMPS] Finding the Q of a Coil   2
• [AMPS] CIRCUIT BREAKER FOR TRANSFORMER PRIMARY CIRCUIT   2
  • [AMPS] CIRCUIT BREAKER FOR TRANSFORMER PRIMARY CIRCUIT   Phil Clements
    • [AMPS] CIRCUIT BREAKER FOR TRANSFORMER PRIMARY CIRCUIT   Bill Coleman
      • [AMPS] CIRCUIT BREAKER FOR TRANSFORMER PRIMARY CIRCUIT   Phil Clements
• Fw: [AMPS] Deoxit/ProGold   skipp isaham
  • [AMPS] Deoxit/ProGold   Phil Levin W2GE
• [AMPS] Tuned Input Circuit Q   2
  • [AMPS] Tuned Input Circuit Q   Phil Clements
    • [AMPS] Tuned Input Circuit Q   Tom Rauch
      • [AMPS] Tuned Input Circuit Q   Phil Clements
      • [AMPS] Tuned Input Circuit Q   Tom Rauch
      • [AMPS] Tuned Input Circuit Q   Ian White, G3SEK
• [AMPS] Hot SB-220   Pete Smith
• [AMPS] Findings surrounding SB-220 Heating   Ian Procyk
• [AMPS] Ameritron AL-1200   Bill Smith
• [AMPS] Discharge energy   Steve Thompson
  • [AMPS] Discharge energy   Ian White, G3SEK
• [AMPS] Noises in electrolytic capacitors   Peter Chadwick
• [AMPS] Tuned Input Circuit Q   2
• [AMPS] Discharge energy   Steve Thompson
• [AMPS] circuit breaker recommendation   John Lyles
• [AMPS] Ameritron AL-1200   2
• [AMPS] Noises in electrolytic capacitors   2
• [AMPS] Discharge energy   2
• [AMPS] Tuned Input Circuit Q   2
• [AMPS] Finding the Q of a Coil   2
• [AMPS] Noises in electrolytic capacitors   Peter Chadwick
• [AMPS] SB-220 cooling   Pete Smith
  • [AMPS] SB-220 cooling   Mike Baker
• [AMPS] Tuned Input Circuit Q   Phil Clements
• [AMPS] An apology   2
  • [AMPS] An apology   Bill Aycock
• [AMPS] Noises in electrolytic capacitors   2
  • [AMPS] Beer?   Andy GD0TEP
    • [AMPS] Beer?   Barry Kirkwood
      • [AMPS] Beer?   Bill Aycock
      • [AMPS] Beer?   Lamb
      • [AMPS] Beer?   Jim Reid
      • [AMPS] Beer?   Barry Kirkwood
• [AMPS] Noises in electrolytic capacitors   Steve Katz
• [AMPS] SB-220 cooling   2
• [AMPS] An apology   2
• [AMPS] CW/SSB Tune Up   Jim Reid
• [AMPS] An apology   Bill Aycock
• [AMPS] Running Time Meters FS   Marv Gonsior
• [AMPS] Beer?   Steve Katz
  • [AMPS] Beer?   Peter Frenning, OZ1PIF
• [AMPS] Tuned Input, what me worry   KG6DV@cs.com
  • [AMPS] Tuned Input, what me worry   Barry Kirkwood
    • [AMPS] Tuned Input, what me worry   Radio WC6W
• [AMPS] Tuned Input, what me worry   Steve Katz
• [AMPS] Henry   steveRiley
• [AMPS] Tuned Input, what me worry   Steve Katz
• [AMPS] Tuned Input, what me worry   Steve Katz
• [AMPS] Henry   Steve Katz
• [AMPS] An apology   2
• [AMPS] CW/SSB Tune Up   2
  • [AMPS] CW/SSB Tune Up   Jim Barber
• [AMPS] Tuned Input, what me worry   2
• [AMPS] An apology   Bill Aycock
  • [AMPS] 3-500Z emission saturation   Tom Rauch
    • [AMPS] Re: 3-500Z emission saturation   Bill Aycock
• [AMPS] caig labs products   skipp isaham
• [AMPS] CW/SSB Tune Up   Jim Reid
• [AMPS] CW/SSB Tune Up   2
  • [AMPS] CW/SSB Tune Up   Phil Clements
    • [AMPS] Re: CW/SSB Tune Up   Jim Reid
      • [AMPS] Re: CW/SSB Tune Up   Tom Rauch
      • [AMPS] Re: CW/SSB Tune Up   Jim Reid
      • [AMPS] Amp Drive Power(Long)   Jim Reid
      • [AMPS] Amp Drive Power(Long)   Tom Rauch
      • [AMPS] Amp Drive Power(Long)   Michael J. Tubby B.Sc. (Hons) G8TIC
      • [AMPS] Amp Drive Power(Long)   Tom Rauch
• [AMPS] Re: Tuned Input, what me worry   Jan.E.Holm@telia.se
  • [AMPS] Re: Tuned Input, what me worry   Nermin Bajramoviæ
• [AMPS] Tuned Beer Input   KG6DV@cs.com
• [AMPS] Tuned Input, what me worry   Peter Chadwick
• [AMPS] CW/SSB Tune Up   Steve Thompson
• [AMPS] T Pad Attenuators   Bill Smith
• [AMPS] Tuned Input, what me worry   Steve Thompson
• [AMPS] re: Airpax Breaker Switches   skipp isaham
• [AMPS] Tuned Input, what me worry   Peter Chadwick
• [AMPS] SB-220 cooling   Peter Chadwick
• [AMPS] CW/SSB Tune Up   2
• [AMPS] Beer?   2
• [AMPS] RE: Beer   W8AV@aol.com
  • [AMPS] RE: Beer   Jim Barber
• [AMPS] Solitron SPF-90   yo9fzs
• [AMPS] RE: Beer   Peter Chadwick
• [AMPS] Tuned Input, what me worry   Steve Katz
• [AMPS] Tuned Input, what me worry   Steve Katz
• [AMPS] Beer?   Steve Katz
• [AMPS] Enough with the Beer ...   Joe Subich, K4IK
  • [AMPS] Enough with the Beer ...   John Tait
• [AMPS] Tuned Input, what me worry   2
• [AMPS] Tuned Input, what me worry   Steve Katz
• [AMPS] Enough with the Beer ...   2
• [AMPS] The Last Word on Beer   Tom Martin
• [AMPS] Tuned Input, what me worry   Steve Katz
• [AMPS] Tuned Input, what me worry   Steve Thompson
• [AMPS] Tuned Input, what me worry   Steve Katz
• [AMPS] OT question   Steve Thompson
  • [AMPS] Help building mono band amp   Jean-Michel Bombar
    • [AMPS] Help building mono band amp   Mike Baker
      • [AMPS] Help building mono band amp   Barry Kirkwood
      • [AMPS] Help building mono band amp   K7RDX
      • [AMPS] Help building mono band amp   Geo Clute W7LFD
      • [AMPS] Help building mono band amp   wlfuqu00@uky.edu
      • [AMPS] Help building mono band amp   Jean-Michel Bombar
• [AMPS] Tuned Input, what me worry   Steve Thompson
• [AMPS] OT question   Steve Katz
• [AMPS] circuit breaker recommendation   ToddRoberts2001@aol.com
• [AMPS] Tuned Input Circuit Q   2
• [AMPS] Tuned Input, what me worry   2
• [AMPS] 3-500Z emission saturation   Steve Katz
• [AMPS] SB-220 cooling -- another thought   Pete Smith
• [AMPS] Re: CW/SSB Tune Up   Steve Katz
• [AMPS] re OT question   Steve Thompson
• [AMPS] 3-500Z emission saturation   2
• [AMPS] Re: 3-500Z emission saturation   2
• [AMPS] SB-220 cooling -- another thought   2
• [AMPS] SB-220 cooling -- another thought   Pete Smith
• [AMPS] Re: CW/SSB Tune Up   2
• [AMPS] Re: CW/SSB Tune Up   2
• [AMPS] Help building mono band amp   2
  • [AMPS] Help building a solid state linear   Anil
• [AMPS] SB-220 cooling -- another thought   2
• [AMPS] FW: BOUNCE amps@contesting.com : Non-member submission from ["Mike McCarthy, W1NR" <w1nr@eecorp.com>]   Joe Subich, K4IK
  • [AMPS] FW: BOUNCE amps@contesting.com : Non-member submission from ["Mike McCarthy, W1NR" <w1nr@eecorp.com>]   Phil Clements
• [AMPS] Filament resistance and power output   Pete Smith
  • [AMPS] Filament resistance and power output   Mike
• [AMPS] Beginner's amp project   Barry Kirkwood
• [AMPS] Re: [ETO_Alpha] B&W 802 plate choke in an Alpha 77Dx   Paul Christensen
• [AMPS] Kenwood TL-922A   Peter V. Ritter
• [AMPS] Kenwood TL-922A 10 meter mod ?   Peter V. Ritter
• [AMPS] Kenwood TL-922A   2
• [AMPS] Filament resistance and power output   2
• [AMPS] SB-221 High Voltage Transformer   Bill Smith
  • [AMPS] SB-221 High Voltage Transformer   Kenneth D. Grimm, K4XL
    • [AMPS] SB-221 High Voltage Transformer   Phil (VA3UX)
      • [AMPS] SB-221 High Voltage Transformer   Lamb
• [AMPS] Tuned Input, what me worry   Peter Chadwick
• [AMPS] HV warning   John T. M. Lyles
  • [AMPS] HV warning   Jon Ogden
• [AMPS] HV warning   ToddRoberts2001@aol.com
• [AMPS] HV warning   2
• [AMPS] Help building mono band amp   steve
• [AMPS] SB-220 cooling   Steve Thompson
  • [AMPS] SB-220 cooling   Pete Smith
• [AMPS] SB-220 cooling   n2bc@stny.rr.com
• [AMPS] SB-220 cooling   Steve Thompson
• [AMPS] HV warning   Steve Thompson
  • [AMPS] HV warning   Mike Baker
• [AMPS] parts needed for 4cx-250 amp I am building   Partain, Chuck
  • [AMPS] parts needed for 4cx-250 amp I am building   Mike Baker
• [AMPS] National 2000   Joseph.Piatt@aventis.com
  • [AMPS] National 2000   Joe Subich, K4IK
• [AMPS] SB-220 cooling   2
  • [AMPS] SB-220 cooling   Joe Subich, K4IK
• [AMPS] parts needed for 4cx-250 amp I am building   Frank Ayers
• [AMPS] SB-220 cooling   2
  • [AMPS] SB-220 cooling   Joe Subich, K4IK
    • [AMPS] SB-220 cooling   Pete Smith
• [AMPS] National 2000   2
• [AMPS] parts needed for 4cx-250 amp I am building   2
• [AMPS] SB-220 Plate Voltage / Output Problem   K7xq@aol.com
• [AMPS] Re: SB-220 cooling   Roy Koeppe
• [AMPS] SB-220 cooling   2
• [AMPS] SB-220 Plate Voltage / Output Problem   2
• [AMPS] Re: SB-220 cooling   2
• [AMPS] SB-220 cooling   Joe Subich, K4IK
  • [AMPS] SB-220 cooling   Tom Rauch
• [AMPS] SB-220 cooling   2
• [AMPS] SB-220 cooling   2
• [AMPS] Hand in the pocket?   Carl Clawson
  • [AMPS] Hand in the pocket?   Tom Rauch
• [AMPS] Hand in pocket test   KG6DV@cs.com
  • [AMPS] Hand in pocket test   Lamb
  • [AMPS] Hand in pocket test   Phil (VA3UX)
• [AMPS] Hand in pocket test   2
• [AMPS] HAND IN POCKET VALIDITY   JimMoci@aol.com
• [AMPS] Hand in the pocket?   ToddRoberts2001@aol.com
• [AMPS] Harbach's URL?   2
  • [AMPS] Harbach's URL?   Gintaras
  • [AMPS] Harbach's URL?   chuck
• [AMPS] Harbach's URL?   2
• [AMPS] SB-221 High Voltage Transformer   2
• [AMPS] SB-221 High Voltage Transformer   2
• [AMPS] FL-2100B SWR Metering   davisr [wd8jja@arrl.net]
• [AMPS] FL-2100B SWR Metering   Steve Thompson
• [AMPS] HV warning   Peter Chadwick
  • [AMPS] HV warning   John T. M. Lyles
• [AMPS] Hand in pocket test   Steve Katz
• [AMPS] parts needed for 4cx-250 amp I am building   Steve Katz
• [AMPS] 4CX1500 question   Bob Sullivan
• [AMPS] 4CX1500BM QUESTION   Ken Barber
• [AMPS] sockets   Peter Chadwick
• [AMPS] Austenitic steels   John Nelson
• [AMPS] Installation of Harbach Kits   Phil Clements
• [AMPS] RF Ammeter - Weston - Ebay Auction   Dan
  • [AMPS] Help   Anil
  • [AMPS] RF Ammeter - Weston - Ebay Auction   Duane Budd
• [AMPS] Schematic Daiwa NS 660PA   Denis Coolican
• [AMPS] Q: Eimac 290A   Christer Jogenborn
• [AMPS] Austenitic steel   Peter Chadwick
• [AMPS] AL-82 Primary Tap Settings   Mike
  • [AMPS] AL-82 Primary Tap Settings   Phil Clements
• [AMPS] Amp Drive Power(Long)   2
• [AMPS] AL-82 Primary Tap Settings   Steve Katz
• [AMPS] AL-82 Primary Tap Settings   Steve Katz
• [AMPS] Austenitic steel   2
• [AMPS] Q: Eimac 290A   2
• [AMPS] AL-82 Primary Tap Settings   2
• [AMPS] Amp Drive Power(Long)   2
• [AMPS] AL-82 Primary Tap Settings   2
• [AMPS] AL-82 Primary Tap Settings   2
• [AMPS] Amp Drive Power(Long)   Tom Rauch
• [AMPS] Alpha question   Mike
• [AMPS] Alpha question   jsschuster
• [AMPS] G3SEK   Peter Chadwick
  • [AMPS] G3SEK   Ian White, G3SEK
• [AMPS] Austenitic steel   Peter Chadwick
• [AMPS] Re: 8k ultra/ "tuned input"   2
  • [AMPS] Re: 8k ultra/ "tuned input"   Doug Hall
  • [AMPS] Re: 8k ultra/ "tuned input"   Phil Clements
  • [AMPS] Re: 8k ultra/ "tuned input"   Jim Reid
    • [AMPS] Re: 8k ultra/ "tuned input"   Tom Rauch
      • [AMPS] Re: 8k ultra/ "tuned input"   Jim Reid
  • [AMPS] 8k ultra Fil V.   Jim Reid
• [AMPS] Re: 8k ultra/ "tuned input"   Steve Katz
• [AMPS] Sound card two tone generation   George K. Watson
• [AMPS] Re: 8k ultra/ "tuned input"   Steve Katz
  • [AMPS] Re: 8k ultra/ "tuned input"   Jim Reid
• [AMPS] Re: 8k ultra/ "tuned input"   2
• [AMPS] Re: 8k ultra/ "tuned input"   Steve Katz
• [AMPS] Ameritron ALS-600   Nathan, Kevin
  • [AMPS] Ameritron ALS-600   Phil Clements
  • [AMPS] Ameritron ALS-600   Steve
• [AMPS] Ameritron ALS-600   Steve Katz
• [AMPS] Ameritron ALS-600   2
• [AMPS] Re: 8k ultra/ "tuned input"   2
• [AMPS] Re: 8k ultra/ "tuned input"   Peter Chadwick
• [AMPS] Re: 8k ultra/ "tuned input"   Peter Chadwick
• [AMPS] Eimac Mechanical Sample   Richard
  • [AMPS] Eimac Mechanical Sample   dan hearn
• Fwd: [AMPS] Need 1500T to compete collection   wlfuqu00@uky.edu
• [AMPS] Re: 8k ultra/ "tuned input"   2
• [AMPS] Calculating input impedance and drive requirements?   Randall DuCharme
  • [AMPS] Calculating input impedance and drive requirements?   Tom Rauch
• [AMPS] Eimac Mechanical Sample   2
• [AMPS] Eimac Mechanical Sample   Steve Katz
  • [AMPS] Eimac Mechanical Sample   Jim
• [AMPS] propagation   John Lyles
• [AMPS] 8k ultra Fil V.   Steve Katz
  • [AMPS] 8k ultra Fil V.   Jim Reid
  • [AMPS] 8k ultra Fil V.   Phil Clements
• [AMPS] ALS-600   Nathan, Kevin
• [AMPS] Use of Svetlana. 4CX800 in amp   JimMoci@aol.com
  • [AMPS] Use of Svetlana. 4CX800 in amp   yo9fzs
• [AMPS] Use of Svetlana. 4CX800 in amp   2
• [AMPS] Cleaning aluminum variable capacitors   n0tt1@juno.com
  • [AMPS] Cleaning aluminum variable capacitors   Phil (VA3UX)
  • [AMPS] Cleaning aluminum variable capacitors   Tom Rauch
• [AMPS] Oil filled cap mounting question   Frank & Barb Ayers
• [AMPS] Plate Choke Winding   Bill Smith
• [AMPS] Plate Choke Winding   2
• [AMPS] MEASURING FILAMENT VOLTAGE   ToddRoberts2001@aol.com
  • [AMPS] MEASURING FILAMENT VOLTAGE   Mike Sawyer
  • [AMPS] MEASURING FILAMENT VOLTAGE   Phil Clements
  • [AMPS] MEASURING FILAMENT VOLTAGE   Tom Rauch
• [AMPS] MEASURING FILAMENT VOLTAGE   2
• [AMPS] Choke input PS question   Randall DuCharme
• [AMPS] MEASURING FILAMENT VOLTAGE   Peter Chadwick
• [AMPS] Choke input PS question   2
  • [AMPS] Choke input PS question   Phil Clements
  • [AMPS] Choke input PS question   Lamb
• [AMPS] Cleaning aluminum variable capacitors   n0tt1@juno.com
• [AMPS] Cleaning aluminum variable capacitors   Peter Chadwick
• [AMPS] Choke input PS question   Peter Chadwick
• [AMPS] Choke input PS question   Randall DuCharme
• [AMPS] Choke input PS question   Peter Chadwick
  • [AMPS] Choke input PS question   Randall DuCharme
• [AMPS] Choke input PS question   Peter Chadwick
• [AMPS] Choke input PS question   2
  • [AMPS] Choke input PS question   Colin Lamb
• [AMPS] Choke input PS question   Peter Chadwick
• [AMPS] Choke input PS question   2
• [AMPS] Choke input PS question   Peter Chadwick
• [AMPS] MEASURING FILAMENT VOLTAGE   2
• [AMPS] metering (filament V)   John T. M. Lyles
• [AMPS] Choke input PS question   2
• [AMPS] Choke input PS question   2
• [AMPS] Choke input PS question   2
• [AMPS] metering (filament V)   Steve Thompson
• [AMPS] resonant choke PS   Peter Chadwick
• [AMPS] resonant choke PS   John T. M. Lyles
• [AMPS] more on resonant choke PS   John T. M. Lyles
• [AMPS] ground loop?   Tom Martin
  • [AMPS] NEED AL-800 MANUAL   Norman Hockler
• [AMPS] ground loop?   2
• [AMPS] Heath HM 2140 PEP power meter   Denis Coolican
  • [AMPS] Heath HM 2140 PEP power meter   Jim
• Fw: [AMPS] Heath HM 2140 PEP power meter   skipp isaham
• [AMPS] A Clone of an SB-220 by SBE   skipp isaham
  • [AMPS] A Clone of an SB-220 by SBE   Doug Hall
  • [AMPS] A Clone of an SB-220 by SBE   Jim
    • [AMPS] A Clone of an SB-220 by SBE   Pete Smith
      • [AMPS] A Clone of an SB-220 by SBE   Jim Bryant
      • [AMPS] A Clone of an SB-220 by SBE   Jim
      • [AMPS] A Clone of an SB-220 by SBE   Pete Smith
• [AMPS] RE: 8k ultra/ "tuned input"   2
• [AMPS] A Clone of an SB-220 by SBE   Steve Katz
  • [AMPS] A Clone of an SB-220 by SBE   carl seyersdahl
• [AMPS] Ground loop   Tom Martin
• [AMPS] Ground Loop Fixed!   Jim
• [AMPS] LK-8877   Mark Michel
• [AMPS] FS: ICOM 2KL Mod kit   Radio WC6W
• [AMPS] FS: Fans   Radio WC6W
• [AMPS] FS: Roller Coils & B&W coil stock   Radio WC6W
• [AMPS] FS: Capacitors   Radio WC6W
• [AMPS] FS: Vacuum Caps & Other Vacuum things   Radio WC6W
• [AMPS] FS: RF Ammeters, Time Meters & Panel Meters   Radio WC6W
• [AMPS] FS: Coax relay & Coax connectors   Radio WC6W
• [AMPS] Amps and Microprocessors   Jim Bryant
  • [AMPS] Amps and Microprocessors   Ian White, G3SEK
• [AMPS] LDG DWM-4 and high power?   Jim Barber
• [AMPS] Russian Tube Designation Numbers   kurt
• [AMPS] In search of BTI LK-1000 manual...second request...   Marty Durham
• [AMPS] Amps and Microprocessors   Jim Bryant
• Fw: [AMPS] In search of BTI LK-1000 manual...second request...   skipp isaham
• [AMPS] SBE   skipp isaham
• [AMPS] info on resonant chokes II   John T. M. Lyles
• [AMPS] info on resonant chokes II   2
• [AMPS] SB-200 Parasitic Suppressors   Vince Staffo
• [AMPS] SB-200 Parasitic Suppressors   2
• [AMPS] FS: Swan MK II w/spare 3-500Z   Lane Zeitler
• [AMPS] Henry 1KD5 Rectifier question   Randall DuCharme
• [AMPS] Henry 1KD5 Rectifier question   2
  • [AMPS] Henry 1KD5 Rectifier question   Randall DuCharme
• [AMPS] tube with handle (4CX10000) plus socket for sale   Carsten Esch
• [AMPS] tube with handle (4CX10000) plus socket for sale   2
• [AMPS] Henry 1KD5 Rectifier question   2
• [AMPS] Henry 1KD5 Rectifier question   Randall DuCharme
• [AMPS] Henry 1KD5 Rectifier question   2
  • [AMPS] Henry 1KD5 Rectifier question   Randall DuCharme
• [AMPS] Henry 1KD5 Rectifier question   2
• [AMPS] Henry 1KD5 Rectifier question   Peter Chadwick
  • [AMPS] Henry 1KD5 Rectifier question   Lamb
• [AMPS] Henry 1KD5 Rectifier question   Steve Thompson
• [AMPS] Henry 1KD5 Rectifier question   Peter Chadwick
  • [AMPS] Henry 1KD5 Rectifier question   Barry Kirkwood
• [AMPS] Henry 1KD5 Rectifier question   Peter Chadwick
• [AMPS] Henry 1KD5 Rectifier question   Peter Chadwick
• [AMPS] 4CX800 Idle Current a bit high   Peter Chadwick
• [AMPS] 4CX800 Idle Current a bit high   Douglas R Snowden
  • [AMPS] 4CX800 Idle Current a bit high   Lamb
• [AMPS] 4CX800 Idle Current a bit high   2
• [AMPS] Henry 1KD5 Rectifier question   2
• [AMPS] Henry 1KD5 Rectifier question   2
• [AMPS] Henry 1KD5 Rectifier question   Steve Katz
• [AMPS] 4CX800 Idle Current a bit high   wb8jkr@juno.com
• [AMPS] How to control a vacuum C ??   Verner Topsøe-Jensen OZ5TG
  • [AMPS] How to control a vacuum C ??   Radio WC6W
    • [AMPS] How to control a vacuum C ??   Ian White, G3SEK
  • [AMPS] How to control a vacuum C ??   Jim Bryant
  • [AMPS] How to control a vacuum C ??   Steve
• [AMPS] Ameritron QSK-5   Jim Reid

Last message date: Wed Oct 31 23:05:41 2001
Archived on: Wed Mar 6 11:37:42 2002

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...