Towertalk Mailing List (date)

Towertalk Mailing List (date)

[Thread Index] [Top] [All Lists]

June 30, 2008

[TowerTalk] 55 and 45 bolted together, Its from Onion, 23:32
Re: [TowerTalk] Any ideals on heliax channel out to towers?, Roger (K8RI), 20:29
Re: [TowerTalk] Tennedyne T28, W5CPT, 19:34
[TowerTalk] Tennedyne T28, mvtaylor, 19:27
Re: [TowerTalk] winch to drill adapter, jim Jarvis, 17:51
[TowerTalk] TX 455 cables, John Hudson, 17:34
Re: [TowerTalk] monobanders for 15 and 20 mts THANKS..!, Jorge Diez - CX6VM, 17:16
Re: [TowerTalk] lighting protection setup - THANKS..!, Jorge Diez - CX6VM, 17:07
Re: [TowerTalk] Rohn 25 Insulated Base, K5RC, 14:18
Re: [TowerTalk] winch to drill adapter, Joe - WDØM, 13:39
Re: [TowerTalk] winch to drill adapter, Rick Karlquist, 13:39
[TowerTalk] winch to drill adapter, craig, 13:20
Re: [TowerTalk] Rohn 25 Insulated Base, Rob Atkinson, 12:46
Re: [TowerTalk] Any ideals on heliax channel out to towers?, Pstark, 12:35
Re: [TowerTalk] Any ideals on heliax channel out to towers?, Gene Smar, 12:27
[TowerTalk] Any ideals on heliax channel out to towers?, Gary E. Jones, 12:02
Re: [TowerTalk] TowerTalk Digest, Vol 66, Issue 89, David Robbins K1TTT, 09:33
Re: [TowerTalk] TowerTalk Digest, Vol 66, Issue 89, Johnny L, 08:57

June 29, 2008

[TowerTalk] An A-3S question, Gregg Seidl, 20:20
[TowerTalk] Help with putting a 52SS on a Rohn 25 foundation, chasm, 20:04
Re: [TowerTalk] Long shaft to base mounted rotator, Roger (K8RI), 15:54
Re: [TowerTalk] patching up rust on a tower?, EL34GUY, 10:55
Re: [TowerTalk] patching up rust on a tower?, Phil Snyder, 09:56
[TowerTalk] patching up rust on a tower?, Gary Slagel, 09:48
[TowerTalk] Long shaft to base mounted rotator, Roger (K8RI), 03:38
Re: [TowerTalk] US Tower RMC-1000 control box question, Dick Green WC1M, 02:34

June 28, 2008

Re: [TowerTalk] Rohn 25 Insulated Base, Bob Maser, 21:52
Re: [TowerTalk] Rohn 25 Insulated Base, Richards, 21:34
Re: [TowerTalk] Guy Tension adjustment, K7LXC, 13:10
[TowerTalk] Rohn 25 Insulated Base, K5RC, 13:05
Re: [TowerTalk] lighting protection setup, Mark Robinson, 09:29
Re: [TowerTalk] lighting protection setup, John Bohnovic, 09:23
[TowerTalk] Antenna id request, KC0QNB, 08:30
Re: [TowerTalk] Wind Loading question ..., David Robbins K1TTT, 06:58
Re: [TowerTalk] Delta Loopcompared toDipole (actualexperience)(Richards), Jim Brown, 02:59
Re: [TowerTalk] Loop vs Dipole...I'm original "asker", Jim Brown, 02:45
Re: [TowerTalk] US Towers MA-550 and ladders, Dick Green WC1M, 01:51
Re: [TowerTalk] Loop vs Dipole...I'm original "asker", Richards, 00:52
[TowerTalk] Wind Loading question ..., Richards, 00:14
Re: [TowerTalk] Loop vs Dipole...I'm original "asker", Richards, 00:03

June 27, 2008

Re: [TowerTalk] Guy Tension adjustment, bill rubin, 21:53
Re: [TowerTalk] US Towers MA-550 and ladders, WA3GIN, 21:17
Re: [TowerTalk] US Towers MA-550 and ladders, K7LXC, 21:10
Re: [TowerTalk] Loop vs Dipole...I'm original "asker", Dan Zimmerman N3OX, 20:50
Re: [TowerTalk] Guy Tension adjustment, K7LXC, 20:33
Re: [TowerTalk] lighting protection setup, Roger (K8RI), 20:22
Re: [TowerTalk] lighting protection setup, Gene Smar, 19:24
Re: [TowerTalk] US Towers MA-550 and ladders, Mike, 19:13
Re: [TowerTalk] US Towers MA-550 and ladders, Dan Hearn, 18:50
[TowerTalk] US Towers MA-550 and ladders, Michael Fox \(K5MEF\), 18:36
Re: [TowerTalk] lighting protection setup, Mark Robinson, 18:15
Re: [TowerTalk] TowerTalk Digest, ki6lo 6 meter beam instructions, Jack - K4WSB, 17:53
Re: [TowerTalk] UFER grounding system, Jim Lux, 17:36
Re: [TowerTalk] TowerTalk Digest, ki6lo 6 meter beam instructions, Alex and LaNell, 17:33
Re: [TowerTalk] lighting protection setup, Rick Stealey, 17:02
Re: [TowerTalk] UFER grounding system, Jim Lux, 16:56
Re: [TowerTalk] Loop vs Dipole...I'm original "asker", Richards, 16:53
Re: [TowerTalk] Loop vs Dipole...I'm original "asker", Richards, 16:50
Re: [TowerTalk] lighting protection setup, David Gilbert, 16:42
Re: [TowerTalk] lighting protection setup, Rick Stealey, 15:50
[TowerTalk] The Tower, Its from Onion, 15:40
[TowerTalk] Tower Remote For Sale, KJ6Y, 15:12
Re: [TowerTalk] monobanders for 15 and 20 mts, Jim Vining, 14:19
[TowerTalk] monobanders for 15 and 20 mts, Jorge Diez - CX6VM, 14:09
[TowerTalk] lighting protection setup, Jorge Diez - CX6VM, 13:54
Re: [TowerTalk] Loop vs Dipole...I'm original "asker", Jim Brown, 13:03
[TowerTalk] Radio Shack TV rotors, John Geiger, 12:19
Re: [TowerTalk] Delta Loopcompared toDipole (actualexperience)(Richards), Richards, 11:42
Re: [TowerTalk] Guy Tension adjustment, bill rubin, 11:23
Re: [TowerTalk] Guy Tension adjustment, bill rubin, 11:16
Re: [TowerTalk] Loop vs Dipole...I'm original "asker", Gene Smar, 10:58
[TowerTalk] Loop vs Dipole...I'm original "asker", Bill Ogden, 10:35
[TowerTalk] Bypassing lines, Craig Clark, 09:17
[TowerTalk] Guy Tension adjustment, Gary Stone, 08:44
Re: [TowerTalk] Delta Loopcompared toDipole (actualexperience)(Richards), David Calder, 06:37
Re: [TowerTalk] Delta Loop compared to Dipole (actualexperience)(Richards), Richards, 01:19
Re: [TowerTalk] Loop vs Dipole...I'm original "asker", Richards, 00:24
Re: [TowerTalk] Loop vs Dipole...I'm original "asker", Gene Smar, 00:18

June 26, 2008

Re: [TowerTalk] UFER grounding system, Mike, 23:37
Re: [TowerTalk] UFER grounding system, Commander John, 23:25
Re: [TowerTalk] Loop vs Dipole...I'm original "asker", Richards, 22:28
Re: [TowerTalk] Loop vs Dipole...I'm original "asker", Richards, 22:21
Re: [TowerTalk] UFER grounding system, Lee Wical, 22:07
Re: [TowerTalk] Delta Loop compared toDipole (actualexperience)(Richards), Richards, 21:50
Re: [TowerTalk] UFER grounding system, Richards, 21:41
[TowerTalk] US Tower RMC-1000 control box question, Scott McClements, 21:36
Re: [TowerTalk] 6-meter Cushcraft 5-element modification, Hector Garcia XE2K, 21:30
Re: [TowerTalk] Loop vs Dipole...I'm original "asker", Tom Osborne, 20:54
Re: [TowerTalk] Loop vs Dipole...I'm original "asker", Richards, 20:45
[TowerTalk] Cushcraft 5 el 6m mod info, Joe Crawford, 20:44
Re: [TowerTalk] Shackles, Anchors, ect, AD5VJ Bob, 20:20
[TowerTalk] Shunt-fed tower - Another Question, Ed Richardson, 19:44
Re: [TowerTalk] Delta Loopcompared toDipole (actualexperience)(Richards), larryjspammenot@teleport.com, 19:11
[TowerTalk] Shackles, Anchors, ect, AD5VJ Bob, 19:06
Re: [TowerTalk] Loop vs Dipole...I'm original "asker", Gene Smar, 18:30
Re: [TowerTalk] Delta Loop compared toDipole (actualexperience)(Richards), W4ZW, 18:24
Re: [TowerTalk] UFER grounding system, Jack/W6NF, 18:16
Re: [TowerTalk] UFER grounding system, Michael Baker, 18:01
Re: [TowerTalk] Delta Loopcompared toDipole (actualexperience)(Richards), Mark Robinson, 18:01
[TowerTalk] Shunt-fed tower, David J. Sourdis, 17:51
Re: [TowerTalk] UFER grounding system, Commander John, 17:38
Re: [TowerTalk] Loop vs Dipole...I'm original "asker", Richards, 17:26
Re: [TowerTalk] Loop vs Dipole...I'm original "asker", Richards, 17:24
Re: [TowerTalk] zipcord loop, David Robbins K1TTT, 17:21
Re: [TowerTalk] Delta Loop compared toDipole (actualexperience)(Richards), Bob Maser, 16:46
Re: [TowerTalk] Delta Loop compared toDipole (actualexperience)(Richards), Richards, 16:42
Re: [TowerTalk] UFER grounding system, Jim Brown, 15:42
Re: [TowerTalk] UFER grounding system, Lee Wical, 15:13
[TowerTalk] [antenneX] 2 for 1 LB Cebik Softcover Book Special, K7LXC, 14:05
[TowerTalk] 40m beam on 80ft tower, Roger Cooke, 14:05
Re: [TowerTalk] Loop vs Dipole...I'm original "asker", Dan Zimmerman N3OX, 14:00
Re: [TowerTalk] Loop vs Dipole...I'm original "asker", Steve Hunt, 13:03
[TowerTalk] 6-meter Cushcraft 5-element modification, RLVZ, 13:01
Re: [TowerTalk] Loop vs Dipole...I'm original "asker", Jim Brown, 12:26
Re: [TowerTalk] Loop vs Dipole...I'm original "asker", ve4xt, 12:13
Re: [TowerTalk] Rectangular loops, was 'square loops', K4SAV, 11:32
Re: [TowerTalk] Loop vs Dipole...I'm original "asker", Steve Hunt, 11:13
Re: [TowerTalk] Loop vs Dipole...I'm original "asker", Gene Smar, 11:02
Re: [TowerTalk] Loop vs Dipole...I'm original "asker", Richards, 10:47
Re: [TowerTalk] Delta Loop compared toDipole (actualexperience)(Richards), Dan Hearn, 10:42
Re: [TowerTalk] Loop vs Dipole...I'm original "asker", Richards, 10:28
Re: [TowerTalk] Loop vs Dipole...I'm original "asker", Richards, 10:22
Re: [TowerTalk] Cushcraft 5 element 6M Yagi mod question, W5CPT, 08:01
[TowerTalk] Force 12 EZNEC Files, Gregg, 07:43
Re: [TowerTalk] Loop vs Dipole...I'm original "asker", Steve Hunt, 05:20
[TowerTalk] Rectangular loops, was 'square loops', jim Jarvis, 04:09
Re: [TowerTalk] Cushcraft 5 element 6M Yagi mod question, Hector Garcia XE2K, 02:11
Re: [TowerTalk] Loop vs Dipole...I'm original "asker", K4SAV, 02:08
Re: [TowerTalk] Delta Loop comparedtoDipole (actualexperience)(Richards), John Geiger, 02:06
Re: [TowerTalk] Loop vs Dipole...I'm original "asker", K4SAV, 01:54
Re: [TowerTalk] Delta Loop compared toDipole (actualexperience)(Richards), Richards, 01:34
Re: [TowerTalk] Loop vs Dipole...I'm original "asker", Richards, 01:28
Re: [TowerTalk] Square loops, K4SAV, 00:33
[TowerTalk] Cushcraft 5 element 6M Yagi mod question, Marc Tessier - VE3TES, 00:22
Re: [TowerTalk] Square loops, K4SAV, 00:20
Re: [TowerTalk] Delta Loop compared toDipole (actualexperience)(Richards), Dan Hearn, 00:11
[TowerTalk] zipcord loop, bill rubin, 00:09
Re: [TowerTalk] Coaxial stub filters, Michael Baker, 00:02

June 25, 2008

[TowerTalk] Square loops, jim Jarvis, 22:59
Re: [TowerTalk] Loop vs Dipole...I'm original "asker", K4SAV, 22:45
[TowerTalk] Has anyone stacked some C49XR antennas?, KZ4USA, 22:36
Re: [TowerTalk] Delta Loop compared to Dipole (actual experience) (Richards), K7LXC, 22:23
Re: [TowerTalk] Loop vs Dipole...I'm original "asker", Richards, 22:17
[TowerTalk] Loop vs Dipole...I'm original "asker", fraz1, 21:50
[TowerTalk] Coaxial stub filters, Dennis W0JX, 20:50
Re: [TowerTalk] tilt over Rohn 25, Cqtestk4xs, 19:05
Re: [TowerTalk] Delta Loop compared to Dipole (actualexperience)(Richards), Richards, 18:30
Re: [TowerTalk] Delta Loop compared to Dipole (actual experience) (Richards), Richards, 18:27
[TowerTalk] tilt over Rohn 25, Skip K3CC, 18:23
Re: [TowerTalk] Delta Loop compared to Dipole (actual experience) (Richards), Richards, 18:22
Re: [TowerTalk] Delta Loop compared to Dipole (actual experience) (Richards), Richards, 18:20
[TowerTalk] Delta Loop compared to Dipole (actual experience), fraz1, 18:06
Re: [TowerTalk] Grounding tower guy wires, TexasRF, 17:54
Re: [TowerTalk] Grounding tower guy wires, Jim Brown, 16:59
Re: [TowerTalk] Grounding tower guy wires, Paul Kelley N1BUG, 16:45
Re: [TowerTalk] Grounding tower guy wires, Paul Kelley N1BUG, 16:40
Re: [TowerTalk] Delta Loop compared to Dipole (actualexperience)(Richards), Bob Maser, 16:23
[TowerTalk] FS: some antenna parts (for miniquad or others), John AA5JG, 16:20
Re: [TowerTalk] Delta Loop compared to Dipole (actualexperience)(Richards), John AA5JG, 16:08
Re: [TowerTalk] Delta Loop compared to Dipole (actual experience)(Richards), Bob Maser, 16:05
Re: [TowerTalk] Delta Loop compared to Dipole (actual experience) (Richards), donovanf, 15:43
Re: [TowerTalk] Delta Loop compared to Dipole (actual experience), Jim Brown, 15:39
Re: [TowerTalk] Delta Loop compared to Dipole (actual experience) (Richards), K4SAV, 15:35
Re: [TowerTalk] Delta Loop compared to Dipole (actual experience), Richards, 15:32
Re: [TowerTalk] Delta Loop compared to Dipole (actual experience) (Richards), Bill Axelrod, 15:12
Re: [TowerTalk] Delta Loop compared to Dipole (actual experience), K4SAV, 15:08
Re: [TowerTalk] Delta Loop compared to Dipole (actual experience) (Richards), Richards, 14:52
Re: [TowerTalk] Delta Loop compared to Dipole (actual experience), Roger N0VR, 13:49
Re: [TowerTalk] Delta Loop compared to Dipole (actual experience) (Richards), Steven Lamendola, 13:44
Re: [TowerTalk] Delta Loop compared to Dipole (actual experience), Roger N0VR, 13:33
Re: [TowerTalk] Grounding tower guy wires, donovanf, 12:31
[TowerTalk] Delta Loop compared to Dipole (actual experience) (Richards), Bill Stacy, 12:29
Re: [TowerTalk] Delta Loop compared to Dipole (actual experience), Rob Atkinson, 12:27
Re: [TowerTalk] Grounding tower guy wires, Tom Haavisto, 12:10
Re: [TowerTalk] Loop v. Dipole, Richards, 12:00
Re: [TowerTalk] Delta Loop compared to Dipole (actual experience), Richards, 11:54
Re: [TowerTalk] Delta Loop compared to Dipole (actual experience), Richards, 11:24
Re: [TowerTalk] Grounding tower guy wires, donovanf, 11:20
Re: [TowerTalk] Grounding tower guy wires, Nathaniel Lee, 10:54
Re: [TowerTalk] Grounding tower guy wires, bill rubin, 10:48
Re: [TowerTalk] Grounding tower guy wires, markrob, 10:13
Re: [TowerTalk] Loop v. Dipole, jim Jarvis, 09:40
[TowerTalk] Grounding tower guy wires, Paul Kelley N1BUG, 08:53
Re: [TowerTalk] Delta Loop compared to Dipole (actual experience), Matt Patterson, 08:30
[TowerTalk] W2GD, Gary Jones, 08:24
[TowerTalk] W2GD, Gary Jones, 07:57
Re: [TowerTalk] Delta Loop compared to Dipole (actual experience), Bob Maser, 07:07
Re: [TowerTalk] Delta Loop compared to Dipole (actual experience), Bob, 02:39
Re: [TowerTalk] Delta Loop compared to Dipole (actual experience), Dan Zimmerman N3OX, 00:56
Re: [TowerTalk] Delta Loop compared to Dipole (actual experience), N7mal, 00:26

June 24, 2008

Re: [TowerTalk] 204CA Antenna Dimensions?, Dale Martin, 23:50
Re: [TowerTalk] Delta Loop compared to Dipole (actual experience), Richards, 22:42
Re: [TowerTalk] Delta Loop compared to Dipole (actual experience), Bob Maser, 22:40
Re: [TowerTalk] 204CA Antenna Dimensions?, Bob Maser, 22:37
Re: [TowerTalk] 204CA Antenna Dimensions?, WA3GIN, 22:35
Re: [TowerTalk] Delta Loop compared to Dipole (actual experience), Robert Hess, 22:33
Re: [TowerTalk] Delta Loop compared to Dipole (actual experience), Robert Hess, 22:29
Re: [TowerTalk] 204CA Antenna Dimensions?, n8de, 22:24
Re: [TowerTalk] 204CA Antenna Dimensions?, Bob Maser, 22:12
[TowerTalk] 204CA Antenna Dimensions?, Dale Martin, 22:01
[TowerTalk] Delta Loop compared to Dipole (actual experience), fraz1, 20:51
Re: [TowerTalk] Gin Pole, Gene Smar, 16:08
Re: [TowerTalk] Gin Pole, Roger (K8RI), 15:14
Re: [TowerTalk] Gin Pole, Roger (K8RI), 15:10
[TowerTalk] W2GD tower accident, Bill Tippett, 14:00
Re: [TowerTalk] Yaesu 2800 in Rohn 25 & replacing bolts in place, K7LXC, 13:56
Re: [TowerTalk] Gin Pole, K7LXC, 13:51
Re: [TowerTalk] Lightening, Gene Smar, 11:44
[TowerTalk] Looking for Another PST51, Dave Sublette, 09:05
Re: [TowerTalk] Yaesu 2800 in Rohn 25 & replacing bolts in place, Roger (K8RI), 01:58
[TowerTalk] [Fwd: Re: Lock nuts revisited], Roger (K8RI), 00:51

June 23, 2008

[TowerTalk] WTB: Mosley TA32JR or TA33JR, John Geiger, 21:11
[TowerTalk] Yaesu 2800 in Rohn 25 & replacing bolts in place, ac9s, 20:45
Re: [TowerTalk] Gin Pole, David Robbins K1TTT, 18:54
Re: [TowerTalk] Lock nuts revisited, Chuck Lewis, 18:49
[TowerTalk] Gin Pole, AD5VJ Bob, 18:44
Re: [TowerTalk] Lock nuts revisited, Mike, 18:39
Re: [TowerTalk] Lock nuts revisited, Steve Hunt, 17:04
Re: [TowerTalk] Lock nuts revisited, David Gilbert, 16:59
Re: [TowerTalk] Lock nuts revisited, Gary Schafer, 16:05
Re: [TowerTalk] Lock nuts revisited, Roger (K8RI), 15:57
Re: [TowerTalk] Lock nuts revisited, Steve Hunt, 15:43
Re: [TowerTalk] Lock nuts revisited, Roger (K8RI), 15:43
Re: [TowerTalk] Lock nuts revisited, Roger (K8RI), 15:18
Re: [TowerTalk] New Tower in North Texas, Paul Kelley N1BUG, 13:10
Re: [TowerTalk] New Tower in North Texas, Pete Smith, 12:20
Re: [TowerTalk] Advice on Tower, Russell Hill, 11:56
Re: [TowerTalk] New Tower in North Texas, K7LXC, 09:23
Re: [TowerTalk] 6 meter antennas ?, J. Gordon Beattie, Jr., W2TTT, 08:59
Re: [TowerTalk] G5RV vs. 2 element yagi, Tim Kass, 08:31
Re: [TowerTalk] Lock nuts revisited, Charles Gallo, 07:41

June 22, 2008

[TowerTalk] Speaking of that big Ash** tree., Roger (K8RI), 23:47
[TowerTalk] Lock nuts revisited, Roger (K8RI), 23:19
Re: [TowerTalk] Advice on Tower, Roger (K8RI), 23:01
[TowerTalk] New Tower in North Texas, AD5VJ Bob, 22:16
Re: [TowerTalk] Advice on Tower, K7LXC, 22:15
Re: [TowerTalk] [SteppIR] Advice on Tower, K7LXC, 21:47
Re: [TowerTalk] Advice on Tower, Dick Green WC1M, 20:55
Re: [TowerTalk] 6 M Antenna - C3i 6 element MANUAL, Roger (K8RI), 20:45
[TowerTalk] Any tower installers that live around Raleigh(NC) area?, k4za@juno.com, 20:36
Re: [TowerTalk] Multi-axis Rotators, kb5my, 18:37
Re: [TowerTalk] Multi-axis Rotators, K7LXC, 17:02
Re: [TowerTalk] [SteppIR] Advice on Tower, Dennis Vernacchia, 15:59
Re: [TowerTalk] [SteppIR] Advice on Tower, Bernard, 15:33
Re: [TowerTalk] WA0FYA Field Day with towers in St. Louis, MO, Scott MacKenzie, 14:26
Re: [TowerTalk] Field Day with towers in St. Louis, MO, WA3GIN, 14:17
Re: [TowerTalk] Mounting roof-top tower on tile/shake roof, David Gilbert, 13:15
[TowerTalk] 6 M Antenna - C3i 6 element MANUAL, ZS4RY, 12:13
[TowerTalk] Field Day with towers in St. Louis, MO, Derek Cohn/WB0TUA, 12:06
Re: [TowerTalk] Advice on Tower, Mark Robinson, 11:54
[TowerTalk] Advice on Tower, w4lde, 11:39
Re: [TowerTalk] Help with "stringer" rope......, James, 11:38
Re: [TowerTalk] 6 meter antennas ?, Ken Boasi, 11:17
Re: [TowerTalk] Multi-axis Rotators, WA6RKN, 10:54
Re: [TowerTalk] The 10 Most Common Tower Building Mistakes, Gene Smar, 10:52
Re: [TowerTalk] 6 meter antennas ?, Chet Moore, 10:09
[TowerTalk] The 10 Most Common Tower Building Mistakes, K7LXC, 09:11
[TowerTalk] WTB: Alliance HD-73 control box, Jack/W6NF, 09:08
[TowerTalk] rope alternatives, Craig Clark, 09:05
Re: [TowerTalk] More 6 meter antennas ?, Larry WA9VRH, 09:00
Re: [TowerTalk] Mounting roof-top tower on tile/shake roof, Charles Mills, 08:59
Re: [TowerTalk] 6 meter antennas ?, Jack/W6NF, 08:56
Re: [TowerTalk] 6 meter antennas ?, Jack/W6NF, 08:51
[TowerTalk] Mounting roof-top tower on tile/shake roof, Michael Fox \(K5MEF\), 08:49
[TowerTalk] G5RV vs. 2 element yagi, John, 08:48
[TowerTalk] More 6 meter antennas ?, Bill Parry, 08:19
Re: [TowerTalk] Fw: Re: Removing a Rotator, David Robbins K1TTT, 06:00
Re: [TowerTalk] Fw: Re: Removing a Rotator, Roger (K8RI), 02:03
Re: [TowerTalk] 6 meter antennas ?, Roger (K8RI), 01:55
Re: [TowerTalk] 6 meter antennas ?, AD5VJ Bob, 00:55
Re: [TowerTalk] 6 meter antennas ?, Jim Miller WB5OXQ in Waco, 00:52
Re: [TowerTalk] 6 meter antennas ?, Hector Garcia XE2K, 00:33
Re: [TowerTalk] 6 meter antennas ?, Michael Baker, 00:18
[TowerTalk] Multi-axis Rotators, WA6RKN, 00:17

June 21, 2008

Re: [TowerTalk] 6 meter antennas ?, David Thompson, 23:49
Re: [TowerTalk] 6 meter antennas ?, Mike Fatchett W0MU, 23:25
Re: [TowerTalk] G5RV vs. 2 element yagi, Mike Fatchett W0MU, 23:24
Re: [TowerTalk] 6 meter antennas ?, Dino Darling, 23:05
Re: [TowerTalk] 6 meter antennas ?, Dino Darling, 23:03
[TowerTalk] Fw: Re: Removing a Rotator, ac9s, 23:03
Re: [TowerTalk] G5RV vs. 2 element yagi, Tom Osborne, 22:53
Re: [TowerTalk] 6 meter antennas ?, W5CPT, 22:46
[TowerTalk] 6 meter antennas ?, Jim Miller WB5OXQ in Waco, 22:30
Re: [TowerTalk] Help with "stringer" rope......, Dan Zimmerman N3OX, 21:10
Re: [TowerTalk] Help with "stringer" rope......, Richard (Rick) Karlquist, 21:08
Re: [TowerTalk] Help with "stringer" rope......, David Gilbert, 20:30
[TowerTalk] Guy wires are here for the new tower, AD5VJ Bob, 20:24
[TowerTalk] Help with "stringer" rope......, fraz1, 18:09
Re: [TowerTalk] G5RV vs. 2 element yagi, Steve Hunt, 18:06
Re: [Antennaware] G5RV vs. 2 element yagi, Eduardo Somoano C, 17:27
Re: [TowerTalk] G5RV vs. 2 element yagi, Steve Hunt, 16:56
Re: [Antennaware] G5RV vs. 2 element yagi, Guy Olinger, K2AV, 16:53
[TowerTalk] House mount for Rohn 25, NI7T, 16:52
Re: [TowerTalk] G5RV vs. 2 element yagi, Steve Hunt, 16:01
Re: [TowerTalk] G5RV vs. 2 element yagi, Scott MacKenzie, 15:56
Re: [TowerTalk] G5RV vs. 2 element yagi, Dave Hachadorian, 15:51
Re: [TowerTalk] G5RV vs. 2 element yagi, KI9A, 15:51
[TowerTalk] G5RV vs. 2 element yagi, John Geiger, 15:40
Re: [TowerTalk] update on John Crovelli, W2GD, Doug Grant, 00:09

June 20, 2008

Re: [TowerTalk] Repairing 25G in situ, Roger (K8RI), 20:36
Re: [TowerTalk] update on John Crovelli, W2GD, Michael Tope, 17:30
Re: [TowerTalk] Problem with a Fulton 2550, Tom Anderson, 14:58
Re: [TowerTalk] Problem with a Fulton 2550, Richard (Rick) Karlquist, 12:15
Re: [TowerTalk] Problem with a Fulton 2550, Dino Darling, 11:55
Re: [TowerTalk] Problem with a Fulton 2550, Dino Darling, 11:50
[TowerTalk] Rohn 20 Specs, mike stokes, 10:53
[TowerTalk] Problem with a Fulton 2550, Kirk.Harding, 10:42
Re: [TowerTalk] Repairing 25G in situ, K7LXC, 10:06
[TowerTalk] Any tower installers that live around Raleigh(NC) area?, wland wland, 09:50
[TowerTalk] update on John Crovelli, W2GD, MAllphin, 09:41
[TowerTalk] Computator rotator info required, John van den Berg \( pe1ghg \), 09:40
Re: [TowerTalk] Trapped in antenna trap confusion, Jim Lux, 09:12
Re: [TowerTalk] Repairing 25G in situ, lew, 03:47
Re: [TowerTalk] Trapped in antenna trap confusion, Dan Zimmerman N3OX, 00:31

June 19, 2008

[TowerTalk] Repairing 25G in situ, butwheat, 23:05
[TowerTalk] Update on W2GD, Doug Grant, 22:20
Re: [TowerTalk] Trapped in antenna trap confusion, N7mal, 21:49
Re: [TowerTalk] Trapped in antenna trap confusion, Tom Osborne, 21:35
Re: [TowerTalk] Trapped in antenna trap confusion, Richards, 21:25
Re: [TowerTalk] Trapped in antenna trap confusion, Billy Cox, 20:57
Re: [TowerTalk] Trapped in antenna trap confusion, Richards, 20:30
Re: [TowerTalk] everything you wanted to know about towers..., Gary Schafer, 19:05
Re: [TowerTalk] Trapped in antenna trap confusion, N7mal, 18:52
Re: [TowerTalk] Trapped in antenna trap confusion, Richards, 14:35
[TowerTalk] AB-577/GRC Info, N7KA, 12:46
Re: [TowerTalk] Need Info on Short Top mast section for AB-577/GRC MilTower Kit, Joe - KC2TN, 12:01
Re: [TowerTalk] Trapped in antenna trap confusion, Steve Hunt, 11:53
Re: [TowerTalk] Trapped in antenna trap confusion, Jim Lux, 11:44
[TowerTalk] Need Info on Short Top mast section for AB-577/GRC Mil Tower Kit, Dennis Vernacchia, 10:46
Re: [TowerTalk] Trapped in antenna trap confusion, Gene Smar, 09:08
Re: [TowerTalk] Trapped in antenna trap confusion, Dan Hearn, 08:41

June 18, 2008

Re: [TowerTalk] Speaking of Fulton winches on TX-455 A WARNING, Dino Darling, 23:34
Re: [TowerTalk] Identify Hardline, David Gilbert, 23:34
Re: [TowerTalk] w2gd tower accident, Roger (K8RI), 23:34
Re: [TowerTalk] Fw: Re: Removing a Rotator, Roger (K8RI), 23:34
Re: [TowerTalk] Identify Hardline, Dan Hearn, 23:34
Re: [TowerTalk] [SMC] W2GD tower accident, Huntington Howard-CADV02, 23:34
Re: [TowerTalk] Identify Hardline, Gene Smar, 23:33
[TowerTalk] everything you wanted to know about towers..., Its from Onion, 19:47
[TowerTalk] Identify Hardline, Dan Hearn, 19:30
Re: [TowerTalk] W2GD tower accident, Dick Green WC1M, 19:24
Re: [TowerTalk] W2GD tower accident, john, 19:11
Re: [TowerTalk] Removing a Rotator, Dick Green WC1M, 18:54
Re: [TowerTalk] W2GD tower accident, john, 18:44
[TowerTalk] Fw: Re: Removing a Rotator, k0xu, 18:37
[TowerTalk] W2GD tower accident, jim Jarvis, 18:33
[TowerTalk] W2GD, Doug Grant, 18:28
[TowerTalk] w2gd tower accident, jim Jarvis, 18:12
Re: [TowerTalk] Speaking of Fulton winches on TX-455 A WARNING, Joe - WDØM, 18:06
Re: [TowerTalk] Speaking of Fulton winches on TX-455 A WARNING, Tom Anderson, 17:51
[TowerTalk] 25/45 tower leg insulators, Dick Hanson, 17:29
Re: [TowerTalk] Need to Find......., David Robbins K1TTT, 16:48
Re: [TowerTalk] Removing a Rotator, David Robbins K1TTT, 16:42
Re: [TowerTalk] Need to Find......., David Robbins K1TTT, 16:36
Re: [TowerTalk] Removing a Rotator, K7LXC, 16:33
[TowerTalk] W2GD tower accident, K7LXC, 16:21
[TowerTalk] Trapped in antenna trap confusion, William Moore, 16:12
[TowerTalk] Speaking of Fulton winches on TX-455 A WARNING, Dan Kovatch, 15:37
Re: [TowerTalk] Dutton-Lainson Brake Winch, Rick Karlquist, 15:32
[TowerTalk] Need to Find......., WA6RKN, 14:57
Re: [TowerTalk] Dutton-Lainson Brake Winch, John Hudson, 14:54
[TowerTalk] insulator section for Rohn 25G, Dick Hanson, 14:48
Re: [TowerTalk] Dutton-Lainson Brake Winch, Rick Karlquist, 14:38
Re: [TowerTalk] Dutton-Lainson Brake Winch, John Hudson, 14:23
[TowerTalk] Rohn 25 house bracket for sale, Van K7VS, 13:42
Re: [TowerTalk] Removing a Rotator, Dick Green WC1M, 13:36
Re: [TowerTalk] Why is the 25GSSB Base Plate Difficult to Find?, Scott MacKenzie, 12:53
Re: [TowerTalk] Removing a Rotator, K7LXC, 10:31
[TowerTalk] Please unsubscribe ..., Weymouth Walker, 07:02
Re: [TowerTalk] Antenna Height Question that is confusing me., Cqtestk4xs, 00:01

June 17, 2008

Re: [TowerTalk] Antenna Height Question that is confusing me., Scott McClements, 23:35
[TowerTalk] Antenna Height Question that is confusing me., Michael Baker, 22:51
Re: [TowerTalk] Why is the 25GSSB Base Plate Difficult to Find?, Jeff Stevens, 22:21
Re: [TowerTalk] g-800 problem, David Robbins K1TTT, 18:21
Re: [TowerTalk] Vertical ID, George Gorsline VE3YV, 15:50
Re: [TowerTalk] Why is the 25GSSB Base Plate Difficult to Find?, ve4xt, 13:16
Re: [TowerTalk] Why is the 25GSSB Base Plate Difficult to Find?, TexasRF, 13:00

June 16, 2008

Re: [TowerTalk] Vertical, Roger (K8RI), 21:23
Re: [TowerTalk] Vertical, Bob Nielsen, 20:26
[TowerTalk] g-800 problem, Jean, 19:48
[TowerTalk] Vertical, Ronald Anderson, 19:48
Re: [TowerTalk] Remote Antenna Switch, Doug Renwick, 19:06
[TowerTalk] Thanks everybody re "concrete footing in very soft soil", John Schumacher, 18:50
[TowerTalk] Need help with US Tower, npalex, 09:35
Re: [TowerTalk] 1/2 wave vertical vs 1/2 wave horizontal dipole, Rob Atkinson, 07:28
[TowerTalk] Thanks for Responses....Vert v Horiz Dipole, fraz1, 00:17
Re: [TowerTalk] Concrete footing, Mike Short, 00:17

June 15, 2008

Re: [TowerTalk] Remote Antenna Switch, Kenneth D. Grimm, K4XL, 23:44
[TowerTalk] HDX-589 Tower Motor, Brian Moran, 23:37
[TowerTalk] Remote Antenna Switch, AD5VJ Bob, 21:16
Re: [TowerTalk] 1/2 wave vertical vs 1/2 wave horizontal dipole, Gary Schafer, 21:08
[TowerTalk] Need help with US Tower, mvtaylor, 20:58
Re: [TowerTalk] 1/2 wave vertical vs 1/2 wave horizontal dipole, Peter Voelpel, 20:44
Re: [TowerTalk] Turn Buckles, Bill Parry, 19:55
Re: [TowerTalk] concrete footing in very soft soil, Roger (K8RI), 19:35
Re: [TowerTalk] Do it right the First Time, Roger (K8RI), 19:32
Re: [TowerTalk] GALVANIZED Bolts, Roger (K8RI), 19:28
Re: [TowerTalk] Turn Buckles, AD5VJ Bob, 18:46
Re: [TowerTalk] Do it right the First Time, David Robbins K1TTT, 18:29
Re: [TowerTalk] 1/2 wave vertical vs 1/2 wave horizontal dipole, Rob Atkinson, 17:37
Re: [TowerTalk] Do it right the First Time, Mark Robinson, 17:25
[TowerTalk] Do it right the First Time, Roger (K8RI), 17:10
Re: [TowerTalk] Why is the 25GSSB Base Plate Difficult to Find?, Jeff Stevens, 17:07
[TowerTalk] GALVANIZED Bolts, Larry E Sheriff, 16:26
Re: [TowerTalk] Why is the 25GSSB Base Plate Difficult to Find?, Jeff Stevens, 16:25
Re: [TowerTalk] Vert. 1/2 wave dipole vs Hori. 1/2 wave dipole?, Chuck Lewis, 15:21
Re: [TowerTalk] digest subscribers, please DO NOT HIT 'REPLY', Roger (K8RI), 15:17
Re: [TowerTalk] Vert. 1/2 wave dipole vs Hori. 1/2 wave dipole?, Peter Voelpel, 15:14
Re: [TowerTalk] Vert. 1/2 wave dipole vs Hori. 1/2 wave dipole?, Richard (Rick) Karlquist, 14:35
Re: [TowerTalk] Tri Ex MW 65 Tower, Dino Darling, 12:23
Re: [TowerTalk] concrete footing in very soft soil, Mark Robinson, 11:03
[TowerTalk] concrete footing in very soft soil, John Schumacher, 10:49
[TowerTalk] digest subscribers, please DO NOT HIT 'REPLY', jim Jarvis, 09:14
Re: [TowerTalk] 1/2 wave vertical vs 1/2 wave horizontal dipole, jim Jarvis, 08:42
[TowerTalk] Why is the 25GSSB Base Plate Difficult to Find?, Steve Davis -Davis RF Co., 07:51
Re: [TowerTalk] Vert. 1/2 wave dipole vs Hori. 1/2 wave dipole?, Jim Brown, 01:49
Re: [TowerTalk] Vert. 1/2 wave dipole vs Hori. 1/2 wave dipole?, Richard (Rick) Karlquist, 01:02
Re: [TowerTalk] Why is the 25GSSB Base Plate Difficult to Find?, N3XX - Tim Heger, 00:51
Re: [TowerTalk] Vert. 1/2 wave dipole vs Hori. 1/2 wave dipole?, Rob Atkinson, 00:24

June 14, 2008

[TowerTalk] Tri Ex MW 65 Tower, Larrbeard, 22:50
[TowerTalk] Why is the 25GSSB Base Plate Difficult to Find?, Jeff Stevens, 21:35
Re: [TowerTalk] Vert. 1/2 wave dipole vs Hori. 1/2 wave dipole?, Richards, 19:07
Re: [TowerTalk] Dutton-Lainson Brake Winch, Alan NV8A, 17:08
[TowerTalk] Dutton-Lainson Brake Winch, John Hudson, 16:02
Re: [TowerTalk] dipole in space question, Jim Brown, 15:53
[TowerTalk] Turn Buckles, AD5VJ Bob, 15:23
Re: [TowerTalk] Vert. 1/2 wave dipole vs Hori. 1/2 wave dipole?, Peter Voelpel, 15:23
[TowerTalk] FS 3 el 40m beam, Peter, 13:25
Re: [TowerTalk] Vert. 1/2 wave dipole vs Hori. 1/2 wave dipole?, Kim Elmore, 13:03
Re: [TowerTalk] Vert. 1/2 wave dipole vs Hori. 1/2 wave dipole?, Peter Voelpel, 12:01
Re: [TowerTalk] Vert. 1/2 wave dipole vs Hori. 1/2 wave dipole?, Richards, 11:27
Re: [TowerTalk] Vert. 1/2 wave dipole vs Hori. 1/2 wave dipole?, peter.voelpel, 09:50
Re: [TowerTalk] Vert. 1/2 wave dipole vs Hori. 1/2 wave dipole?, Jim Brown, 09:02
Re: [TowerTalk] 1/2w vertical v. 1/2w horizontal, Jim Brown, 08:52
Re: [TowerTalk] 1/2w vertical v. 1/2w horizontal, donovanf, 08:33
[TowerTalk] 1/2w vertical v. 1/2w horizontal, michael castellano, 08:03
Re: [TowerTalk] Vert. 1/2 wave dipole vs Hori. 1/2 wave dipole?, Peter Voelpel, 03:38

June 13, 2008

Re: [TowerTalk] dipole in space question, Martin Ewing AA6E, 15:07
Re: [TowerTalk] Vert. 1/2 wave dipole vs Hori. 1/2 wave dipole?, Rick Karlquist, 14:46
[TowerTalk] Vert. 1/2 wave dipole vs Hori. 1/2 wave dipole?, fraz1, 14:03
[TowerTalk] Pins for Yaesu rotor box connector., Carrington, Walter, 00:20

June 12, 2008

Re: [TowerTalk] Rotor Cable bulkhead pass through, Jim Lux, 17:06
Re: [TowerTalk] Rotor Cable bulkhead pass through, Joe Giacobello, 15:36
[TowerTalk] Removing a Rotator, waterpower, 14:44
[TowerTalk] Rotor Cable bulkhead pass through, Tim Holmes, 13:59
Re: [TowerTalk] dipole in space question, BRENT BAUM, 13:37
[TowerTalk] dipole in space question, Al Williams, 11:58
[TowerTalk] Hy-Gain HG-70HD, Don Tucker, 08:06
Re: [TowerTalk] Replace tower, antenna and rotor, Mike, 08:02
Re: [TowerTalk] Removing a Rotator, Kirk.Harding, 07:13
Re: [TowerTalk] Removing a Rotator, N3XX - Tim Heger, 06:28
Re: [TowerTalk] Removing a Rotator, Billy Cox, 01:41
Re: [TowerTalk] Removing a Rotator, RICHARD SOLOMON, 01:17
Re: [TowerTalk] Removing a Rotator, Richards, 01:12
Re: [TowerTalk] Removing a Rotator, Dave Hachadorian, 00:14

June 11, 2008

Re: [TowerTalk] Removing a Rotator, Jim Rhodes, 22:43
Re: [TowerTalk] FW: Hindsight: Check your rotator bolts, Jim Rhodes, 22:35
Re: [TowerTalk] Removing a Rotator, N3XX - Tim Heger, 22:11
Re: [TowerTalk] Removing a Rotator, Tom Osborne, 21:30
[TowerTalk] Removing a Rotator, waterpower, 21:02
Re: [TowerTalk] Guying Material and resonance, K7LXC, 20:41
Re: [TowerTalk] Replace tower, antenna and rotor, K7LXC, 20:14
Re: [TowerTalk] Guying Material and resonance, Roger (K8RI), 17:58
Re: [TowerTalk] Guying Material and resonance, Roger (K8RI), 17:56
Re: [TowerTalk] Guying Material and resonance, Pete Smith, 17:17
Re: [TowerTalk] Guying Material and resonance, Pete Smith, 17:17
Re: [TowerTalk] Guying Material and resonance, sabrams, 16:58
Re: [TowerTalk] Guying Material and resonance, Roger (K8RI), 16:27
Re: [TowerTalk] Guying Material and resonance, bill rubin, 16:14
Re: [TowerTalk] Guying Material and resonance, N7mal, 15:45
Re: [TowerTalk] USCG tower manual, David Jordan, 15:18
Re: [TowerTalk] Guying Material and resonance, Billy Cox, 14:57
Re: [TowerTalk] Guying Material and resonance, Jwpjj, 14:42
Re: [TowerTalk] FW: Hindsight: Check your rotator bolts, Dan Hearn, 11:41
Re: [TowerTalk] FW: Hindsight: Check your rotator bolts, Doug Renwick, 11:06
[TowerTalk] Computer Controling my rotor, Tim Holmes, 10:04
[TowerTalk] Replace tower, antenna and rotor, allan1 dejazzd.com, 08:43
Re: [TowerTalk] New project, Jim Idelson, 07:14
Re: [TowerTalk] New project, Richards, 00:47

June 10, 2008

Re: [TowerTalk] New project, Jim Idelson, 21:42
Re: [TowerTalk] Ham 4 Question, Gedas, 18:56
[TowerTalk] USCG tower manual, Gary Schafer, 16:53
Re: [TowerTalk] Wilson MT-61 Rivets Update, Richard Zalewski, 15:57
Re: [TowerTalk] Ham 4 Question, Julio Peralta, 15:30
Re: [TowerTalk] Guy Wire clamps, n9lah, 15:10
Re: [TowerTalk] TowerTalk Digest, Vol 66, Issue 32, Robert Chudek - K0RC, 14:08
Re: [TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, Bob Maser, 14:07
Re: [TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, Richards, 13:39
Re: [TowerTalk] Guy wire clamps, Richards, 13:36
[TowerTalk] Help Locating #18 Black( DAVIS RF resp) Insulated SOLID Copper Wire DAVIS RF Co. resp., Steve Davis -Davis RF Co., 13:32
Re: [TowerTalk] TowerTalk Digest, Vol 66, Issue 32, RTTYMAN, 12:15
[TowerTalk] Ham 4 Question, Larry Comden, 08:53

June 09, 2008

Re: [TowerTalk] Hindsight: Check your rotator bolts, Richards, 22:56
Re: [TowerTalk] Help Locating #18 Black Insulated SOLID Copper Wire, RICHARD SOLOMON, 21:09
Re: [TowerTalk] Help Locating #18 Black Insulated SOLID Copper Wire, Eric - VE3GSI, 21:02
[TowerTalk] Help Locating #18 Black Insulated SOLID Copper Wire, fraz1, 20:32
[TowerTalk] Guy wire clamps, Brian Machesney, 20:32
Re: [TowerTalk] TowerTalk Digest, Vol 66, Issue 30, N1BAA - Jose Castillo, 20:30
Re: [TowerTalk] FW: Hindsight: Check your rotator bolts, Kim Elmore, 20:12
Re: [TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, N7mal, 20:06
Re: [TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, Bruce Jungwirth, 19:39
Re: [TowerTalk] FW: Hindsight: Check your rotator bolts, Jim McLaughlin, 19:33
Re: [TowerTalk] FW: Hindsight: Check your rotator bolts, Chuck Lewis, 19:18
Re: [TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, AD5VJ Bob, 18:58
Re: [TowerTalk] Hindsight: Check your rotator bolts, W7TMT, 18:53
Re: [TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, john, 18:49
Re: [TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, AD5VJ Bob, 18:23
Re: [TowerTalk] FW: Hindsight: Check your rotator bolts, Kimberly Elmore, 17:46
[TowerTalk] FW: Hindsight: Check your rotator bolts, Dubovsky, George, 15:23
Re: [TowerTalk] New project, Alfred Frugoli, 14:30
Re: [TowerTalk] Positioning A LM-70 Crank-Up, Alfred Frugoli, 14:04
Re: [TowerTalk] Hindsight: Check your rotator bolts, Roger (K8RI), 14:03
[TowerTalk] New Tower, warrenwolff, 13:57
Re: [TowerTalk] New project, Dino Darling, 13:54
[TowerTalk] New project, Its from Onion, 13:22
Re: [TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, Larry Banks, 12:28
Re: [TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, bill rubin, 12:21
Re: [TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, bill rubin, 12:21
Re: [TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, Kimberly Elmore, 12:01
Re: [TowerTalk] first tower--first guys, Mirko S57AD, 11:22
Re: [TowerTalk] first tower--first guys, Richards, 10:57
Re: [TowerTalk] first tower--first guys, jim Jarvis, 10:36
Re: [TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, Larry Banks, 10:27
Re: [TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, John Hudson, 10:25
Re: [TowerTalk] new tower, TexasRF, 10:19
Re: [TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, Paul_group, 10:15
Re: [TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, Charles Mills, 09:27
[TowerTalk] First Tower, Tom Martin, 08:49
Re: [TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, n3sl, 08:46
Re: [TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, Dave Cook, 08:46
Re: [TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, Russell Hill, 08:26
Re: [TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, WA3GIN, 08:07
Re: [TowerTalk] Hindsight: Check your rotator bolts, Dubovsky, George, 08:00
[TowerTalk] serious answer to the silly question, Larry DiGioia N8KU, 07:22
Re: [TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, bob finger, 06:25
Re: [TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, Roger (K8RI), 05:30
Re: [TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, Roger (K8RI), 04:56
Re: [TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, Roger (K8RI), 04:44
Re: [TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, John Lemay, 03:15
Re: [TowerTalk] new tower, bill rubin, 01:33
Re: [TowerTalk] new tower, Dino Darling, 01:05
Re: [TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, Richards, 00:48
Re: [TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, Tom WA9WSJ, 00:45
Re: [TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, Andre Van Wyk, 00:27
Re: [TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, larryjspammenot@teleport.com, 00:20
Re: [TowerTalk] new tower, AD5VJ Bob, 00:16
Re: [TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, Peter Voelpel, 00:10
Re: [TowerTalk] new tower, Tom Haavisto, 00:01

June 08, 2008

Re: [TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, Mike, 23:58
Re: [TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, AD5VJ Bob, 23:24
Re: [TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, Richards, 23:20
Re: [TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, Tom Osborne, 23:09
Re: [TowerTalk] new tower, AD5VJ Bob, 23:05
Re: [TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, Rob Atkinson, 23:00
Re: [TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, AD5VJ Bob, 22:59
[TowerTalk] new tower, Greenacres113, 22:58
Re: [TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, Jim Chaggaris, 22:53
Re: [TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, Frank J. Connelly, 22:41
Re: [TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, Kim Elmore, 22:22
Re: [TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, Hardy Landskov, 21:56
[TowerTalk] FIRST TOWER UP AND LOOKING GORGEOUS, AD5VJ Bob, 21:34
Re: [TowerTalk] How To Cut "Slits" In Aluminum Tubing?, Tom Osborne, 19:53
Re: [TowerTalk] How To Cut "Slits" In Aluminum Tubing?, Marshall Stewart KA5M, 19:02
Re: [TowerTalk] How To Cut "Slits" In Aluminum Tubing?, Randy, 18:50
[TowerTalk] How To Cut "Slits" In Aluminum Tubing?, Marshall Stewart KA5M, 18:10
[TowerTalk] Notes on the K5LAD Tailtwister repair web page, Scott Robbins, 17:05
Re: [TowerTalk] Positioning A LM-70 Crank-Up, Roger (K8RI), 13:03
[TowerTalk] LM-470 tower erection, NPAlex, 12:56
Re: [TowerTalk] Positioning A LM-70 Crank-Up, Pstark, 11:45
Re: [TowerTalk] Positioning A LM-70 Crank-Up, Rick Stealey, 11:39
Re: [TowerTalk] Positioning A LM-70 Crank-Up, Joe Giacobello, 09:31
[TowerTalk] Positioning A LM-70 Crank-Up, Bill Winkis, 08:05

June 07, 2008

[TowerTalk] V bolts, michael castellano, 17:43
[TowerTalk] V bolt source?, K1TTT, 14:49
Re: [TowerTalk] ROHN 25G top section, Roger (K8RI), 03:21
Re: [TowerTalk] Anyone stacking some large qauds out there?, Peter Voelpel, 03:04
Re: [TowerTalk] ROHN 25G top section, Lee Wical, 02:53
Re: [TowerTalk] Hindsight: Check your rotator bolts, Roger (K8RI), 00:46
Re: [TowerTalk] Hindsight: Check your rotator bolts, Roger (K8RI), 00:39

June 06, 2008

Re: [TowerTalk] Hindsight: Check your rotator bolts, Rob Frohne, 23:51
[TowerTalk] Anyone stacking some large qauds out there?, KZ4USA, 21:23
[TowerTalk] Check your rotator bolts...and more, Cqtestk4xs, 18:29
Re: [TowerTalk] Identifying aluminum alloy, Blake Bowers, 17:08
Re: [TowerTalk] Identifying aluminum alloy, Scott MacKenzie, 17:05
[TowerTalk] FW: Hindsight: Check your rotator bolts, David Calder, 16:08
Re: [TowerTalk] Hindsight: Check your rotator bolts, Roger (K8RI), 16:05
Re: [TowerTalk] Hindsight: Check your rotator bolts, Dick Green WC1M, 15:35
Re: [TowerTalk] Hindsight: Check your rotator bolts, Dick Green WC1M, 15:35
Re: [TowerTalk] HAM III x HAM IV and others, Roger (K8RI), 15:01
Re: [TowerTalk] Hindsight: Check your rotator bolts, Roger (K8RI), 14:41
Re: [TowerTalk] HAM III x HAM IV and others, Joe Giacobello, 14:32
[TowerTalk] Hindsight: Check your rotator bolts, Barry Merrill, 13:24
Re: [TowerTalk] Analyzer and AIM comments to Jim Lux, Jay Terleski, 12:47
[TowerTalk] Identifying aluminum alloy, Doug Grant, 12:41
Re: [TowerTalk] Analyzer and AIM comments to Jim Lux, Jim Lux, 12:00
Re: [TowerTalk] Analyzer and AIM comments to Jim Lux, Jim Lux, 11:50
Re: [TowerTalk] Shortening an M2 6M5-X, W7CE, 10:24
[TowerTalk] 6 meter Yagi, Cqtestk4xs, 03:57

June 05, 2008

Re: [TowerTalk] HAM III x HAM IV and others, Rob Frohne, 23:08
Re: [TowerTalk] Shortening an M2 6M5-X, Carrington, Walter, 22:02
[TowerTalk] Shortening an M2 6M5-X, Dennis W0JX, 21:36
[TowerTalk] broken tower section, michael castellano, 19:41
Re: [TowerTalk] broken tower section, N7mal, 19:39
Re: [TowerTalk] broken tower section, W5CPT, 19:09
Re: [TowerTalk] broken tower section, Roger \(K8RI\), 19:05
Re: [TowerTalk] Guy Wire Angle, Bill W6JEX, 19:05
[TowerTalk] broken tower section, Joe Barnes, 18:31
Re: [TowerTalk] Guy Wire Angle, David Robbins K1TTT, 16:52
[TowerTalk] Guy Wire Angle, Paul Sturpe, 15:20
Re: [TowerTalk] Analyzer and AIM comments to Jim Lux, Jim Brown, 14:04
Re: [TowerTalk] HAM III x HAM IV and others, Roger (K8RI), 13:01
Re: [TowerTalk] Analyzer and AIM comments to Jim Lux, Jay Terleski, 09:57
Re: [TowerTalk] Charlston K5MLC - A3S Boom to Mast - Quo, K5MLC \(Mike\), 09:33
Re: [TowerTalk] HAM III x HAM IV and others, Rob Frohne, 08:36

June 04, 2008

Re: [TowerTalk] LMR-400 LMR-600 Equivalent (and stuff), Jim Lux, 20:25
Re: [TowerTalk] LMR-400 LMR-600 Equivalent (and stuff), James Wolf, 19:45
[TowerTalk] Light duty rotor question, David Kozinn, K2DBK, 18:31
[TowerTalk] Wilson rivets, Skip K3CC, 16:42
Re: [TowerTalk] redundant posts, Roger (K8RI), 15:30
Re: [TowerTalk] Analyzers, Jim Lux, 10:54
Re: [TowerTalk] TowerTalk Digest, Vol 66, Issue 11, lmmohr, 09:03
[TowerTalk] redundant posts, Jay Terleski, 08:28
Re: [TowerTalk] LMR-400 LMR-600 Equivalent (and stuff), Kevin, 08:15
[TowerTalk] Analyzers, Jay Terleski, 08:12
[TowerTalk] Antenna Analyzer AIM 4170B, Jay Terleski, 08:11
[TowerTalk] Antenna Analyzers, Jay Terleski, 08:11
Re: [TowerTalk] Wilson MT-61 Rivets, Alfred Frugoli, 08:11
Re: [TowerTalk] Jefa Tech cable QUALITY ?, Roger (K8RI), 01:21
Re: [TowerTalk] LMR-400 LMR-600 Equivalent (and stuff), Roger (K8RI), 01:03
Re: [TowerTalk] Jefa Tech cable QUALITY ?, Jim Lux, 00:44

June 03, 2008

Re: [TowerTalk] LMR-400 LMR-600 Equivalent (and stuff), Marlon K. Schafer, 22:59
Re: [TowerTalk] LMR-400 LMR-600 Equivalent (and stuff), James Wolf, 22:42
Re: [TowerTalk] Jefa Tech cable QUALITY ?, Jim Chaggaris, 22:29
[TowerTalk] Jefa Tech cable QUALITY ?, Roger Parsons, 21:52
Re: [TowerTalk] Wilson MT-61 Rivets, Dennis Vernacchia, 19:27
Re: [TowerTalk] Jefa Tech cable QUALITY ?, Roger (K8RI), 18:55
Re: [TowerTalk] Jefa Tech cable QUALITY ?, Roger (K8RI), 18:54
[TowerTalk] Wilson MT-61 Rivets, ehekman, 18:51
[TowerTalk] Analyzer Power, ABowenN4OO, 18:50
[TowerTalk] Jefa Tech cable QUALITY ?, Roger Parsons, 16:45
Re: [TowerTalk] yaesu g1000dxa vs yaesu 2800, David Robbins K1TTT, 16:15
[TowerTalk] LMR-400, Bob Gibson, 14:04
Re: [TowerTalk] Jefa Tech cable QUALITY ? Resp from DAVIS RF Co, Jim Brown, 13:18
Re: [TowerTalk] LMR-400 LMR-600 Equivalent (and stuff), Daron Wilson, 13:05
[TowerTalk] Jefa Tech cable QUALITY ? Resp from DAVIS RF Co, Steve Davis -Davis RF Co., 12:46
Re: [TowerTalk] LMR-400 LMR-600 Equivalent (and stuff), Jim Brown, 12:41
Re: [TowerTalk] LMR-400 LMR-600 Equivalent (and stuff), Marlon K. Schafer \(509\) 982-2181, 12:21
[TowerTalk] Wilson MT-61 Rivets, Richard Zalewski, 11:48
Re: [TowerTalk] RF/antenna analyzers, GALE STEWARD, 08:11
Re: [TowerTalk] yaesu g1000dxa vs yaesu 2800, Pete Smith, 07:04
Re: [TowerTalk] HAM III x HAM IV and others, Roger (K8RI), 02:29
Re: [TowerTalk] Jefa Tech low-loss coax - opinions / experience?, Perry - K4PWO, 02:27
Re: [TowerTalk] LMR-400 LMR-600 Equivalent (and stuff), Roger (K8RI), 01:57

June 02, 2008

Re: [TowerTalk] LMR-400 LMR-600 Equivalent, Hector Garcia XE2K, 23:26
[TowerTalk] yaesu g1000dxa vs yaesu 2800, Joe Barnes, 22:50
[TowerTalk] LMR-400 LMR-600 Equivalent, Rich Hallman - N7TR, 22:43
Re: [TowerTalk] Jefa Tech low-loss coax - opinions / experience?, Les Kalmus, 22:03
Re: [TowerTalk] Jefa Tech low-loss coax - opinions / experience?, AB2E Darrell, 19:25
Re: [TowerTalk] Jefa Tech low-loss coax - opinions / experience?, Joe - WDØM, 19:09
Re: [TowerTalk] RF/antenna analyzers, Rob Atkinson, 18:32
Re: [TowerTalk] Jefa Tech low-loss coax - opinions / experience?, Hector Garcia XE2K, 18:14
[TowerTalk] Jefa Tech low-loss coax - opinions / experience?, Brian Machesney, 17:45
Re: [TowerTalk] TowerTalk Digest, Vol 66, Issue 4, Bill Fuqua, 17:45
Re: [TowerTalk] ANTENNA ANALYZER?, Robskel, 17:45
[TowerTalk] RF/antenna analyzers, Barry Fox, 17:45
Re: [TowerTalk] HAM III x HAM IV and others, Cqtestk4xs, 17:34
Re: [TowerTalk] HAM III x HAM IV and others, Mike DeChristopher, K1KAA, 17:27
[TowerTalk] HAM III x HAM IV and others, PY1KS - Alex, 16:22
Re: [TowerTalk] antenna analyzers, Tod -ID, 15:54
Re: [TowerTalk] ant model gain, Terry Conboy, 15:24
Re: [TowerTalk] antenna analyzers, Gene Smar, 14:44
[TowerTalk] antenna analyzers, Rob Atkinson, 13:39
Re: [TowerTalk] ant model gain, Gary Schafer, 11:40
Re: [TowerTalk] ant model gain, Bob Nielsen, 11:20
Re: [TowerTalk] Phasing lines, Richard (Rick) Karlquist, 11:11
[TowerTalk] ant model gain, Al Williams, 10:43
[TowerTalk] Analyzers, Bill Ogden, 08:59
Re: [TowerTalk] Phasing lines, Dennis Ventler, 07:49
[TowerTalk] Coax and Attic Heat, Jeff Stevens, 07:29
Re: [TowerTalk] ANTENNA ANALYZER?, Bill Winkis, 07:03

June 01, 2008

Re: [TowerTalk] ANTENNA ANALYZER?, Michael Dinkelman, 23:23
Re: [TowerTalk] Phasing lines, Terry Conboy, 22:57
Re: [TowerTalk] ANTENNA ANALYZER?, Blake Bowers, 22:51
Re: [TowerTalk] ANTENNA ANALYZER?, Ed Richardson, 22:45
[TowerTalk] Precision 51 ohm resistors for use as standards, Tod -ID, 22:16
Re: [TowerTalk] Phasing lines, ww3s, 22:15
Re: [TowerTalk] ANTENNA ANALYZER?, W5CPT, 22:11
Re: [TowerTalk] ANTENNA ANALYZER?, K7LXC, 21:30
[TowerTalk] ANTENNA ANALYZER?, Robert Bogash, 21:21
Re: [TowerTalk] Analyzers, Brian Machesney, 21:21
Re: [TowerTalk] Phasing lines, donovanf, 19:32
[TowerTalk] Phasing lines, Tom Osborne, 19:05
Re: [TowerTalk] Analyzers, Richard (Rick) Karlquist, 18:02
Re: [TowerTalk] Faraday Cage, David Gilbert, 16:47
Re: [TowerTalk] Faraday Cage, Roger (K8RI), 16:15
Re: [TowerTalk] Faraday Cage, Roger (K8RI), 16:13
[TowerTalk] Posting List, ryanduffie, 15:17
[TowerTalk] Need help with solar power - OT, Tim Holmes, 15:05
Re: [TowerTalk] Faraday Cage, Gene Smar, 14:13
Re: [TowerTalk] Does anyone have an EZNEC model file for the TH11DX, please?, Gedas, 14:11
Re: [TowerTalk] Faraday Cage, Dan Zimmerman N3OX, 13:44
Re: [TowerTalk] Faraday Cage, Pat Barthelow, 13:40
Re: [TowerTalk] Faraday Cage, Jim Lux, 13:37
[TowerTalk] Analyzers, Denis Coolican, 13:20
Re: [TowerTalk] Faraday Cage, warrenwolff, 13:03
[TowerTalk] FS - Houston TX area, Telex Hygain 52 ft crankup tower, Phil M., 11:34
Re: [TowerTalk] Used pre-forms, donovanf, 10:15
Re: [TowerTalk] Used pre-forms, K7LXC, 10:00
[TowerTalk] ANTENNA ANALYZER?, Ing . Milan Dlabač, 09:01
Re: [TowerTalk] Faraday Cage, Martin Ewing AA6E, 08:50
Re: [TowerTalk] ANTENNA ANALYZER?, Steve Hunt, 07:34
[TowerTalk] ANTENNA ANALYZER?, R Verhoeven, 06:34
[TowerTalk] Does anyone have an EZNEC model file for the TH11DX, please?, David J Windisch, 06:10
Re: [TowerTalk] Dipping coils with MFJ Analyzer, Dale Martin, 00:33
Re: [TowerTalk] Faraday Cage, Jim Brown, 00:13