March 2010 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Mon Mar 1 04:45:35 PST 2010
Ending: Wed Mar 31 23:32:42 PDT 2010
Messages: 987

• [Amps] soft start / thermistor   Jim Thomson
  • [Amps] soft start / thermistor   Roger
• [Amps] Manganin wire   MIKE DURKIN
  • [Amps] Manganin wire   Tim Long
    • [Amps] Manganin wire   MIKE DURKIN
  • [Amps] Manganin wire   Ron Youvan
• [Amps] WD-40 is not....   Charles Harpole
  • [Amps] WD-40 is not....   Fuqua, Bill L
    • [Amps] WD-40 is not....   Mike
      • [Amps] WD-40 is not....   David Jordan
      • [Amps] WD-40 is not....   David Cutter
      • [Amps] WD-40 is not....   Larry Benko
      • [Amps] WD-40 is not....   Alex Eban
  • [Amps] WD-40 is not....   Cecil Acuff
    • [Amps] WD-40 is not....   Jim Carr
      • [Amps] WD-40 is not....   Ryan Foster
      • [Amps] WD-40 is not....   Randall, Randy
      • [Amps] WD-40 is not....   Alek Petkovic
      • [Amps] WD-40 is not....   Carl
      • [Amps] WD-40 is not....   Ron Youvan
      • [Amps] WD-40 is not....   Ryan Foster
      • [Amps] WD-40 is not....   donroden at hiwaay.net
      • [Amps] WD-40 is not....   Ken
      • [Amps] WD-40 is not....   Roger
      • [Amps] WD-40 is not....   Ron Youvan
• [Amps] 10V   Richard Schmuke
• [Amps] Commander 2500E   Jim Thomson
• [Amps] Mangian   Jim Thomson
  • [Amps] Mangian   Larry Benko
• [Amps] WD-40   cx7tt at 4email.net
  • [Amps] WD-40   Cecil Acuff
  • [Amps] WD-40   Roger
• [Amps] HP23 Heath Power Supply   Glen Zook
• [Amps] WD-40 is not....   SECOPSYS at aol.com
• [Amps] WD-40 is not....   Patrick
• [Amps] Fw: WD-40 is not....   Jim Dawson
  • [Amps] Fw: WD-40 is not....   Phil Clements
    • [Amps] Fw: WD-40 is not....   Randall, Randy
• [Amps] WD-40 is not....   Ron Youvan
• [Amps] WD-40 Is Not....   Ward Silver
  • [Amps] WD-40 Is Not....   Carl
    • [Amps] WD-40 Is Not....   Ron Youvan
      • [Amps] WD-40 Is Not....   Bob Moody
• [Amps] soft start, how to determine if needed?   Bill, W6WRT
  • [Amps] soft start, how to determine if needed?   Roger
    • [Amps] soft start, how to determine if needed?   Bill, W6WRT
  • [Amps] soft start, how to determine if needed?   Randall, Randy
• [Amps] soft start, how to determine if needed?   Herzog
• [Amps] WD-40 Is Not....   K1SG at aol.com
• [Amps] Manganin Wire /meter shunts   Jim Thomson
• [Amps] HP 120B Oscilloscope For Sale   Robert Groh
• [Amps] HP 120B Oscilloscope For Sale   Robert Groh
• [Amps] Anyone Heard from Manfred?   Ward Silver
• [Amps] WD-40   Jim Thomson
• [Amps] Thermistor's.   Jim Thomson
  • [Amps] Thermistor's.   Bill, W6WRT
• [Amps] MLA-2500 retrofit.   Jim Thomson
  • [Amps] MLA-2500 retrofit.   MIKE DURKIN
  • [Amps] MLA-2500 retrofit.   Roger
    • [Amps] MLA-2500 retrofit.   Ryan Foster
    • [Amps] MLA-2500 retrofit.   Joe Subich, W4TV
  • [Amps] MLA-2500 retrofit.   Winfried Kriegl
  • [Amps] MLA-2500 retrofit.   Carl
  • [Amps] MLA-2500 retrofit.   Doug Renwick
    • [Amps] MLA-2500 retrofit.   Carl
• [Amps] Re GI-7B Triodes..   Robert Briggs
  • [Amps] Re GI-7B Triodes..   Jeff Blaine AC0C
• [Amps] soft start, how to determine if needed?   TexasRF at aol.com
• [Amps] WD-40 Is Not....   Dave White
  • [Amps] WD-40 Is Not....   Alek Petkovic
    • [Amps] WD-40 Is Not....   Ryan Foster
      • [Amps] WD-40 Is Not....   Jay Musikar
      • [Amps] WD-40 Is Not....   donroden at hiwaay.net
• [Amps] URL for YC-156 / 179 / 12-500pf @ 10 kv ceramic vac caps   Jim Thomson
• [Amps] 120 cycle hum from Henry 2K-4   johndtate at post.com
  • [Amps] 120 cycle hum from Henry 2K-4   Jim Brown
• [Amps] Yaesu Quadra System VL-1000   johne tds.net
• [Amps] Thermistor's.   Herzog
  • [Amps] Thermistor's.   Gary Smith
• [Amps] 120 hz hum from Henry 2k-4   Jim Thomson
• [Amps] Soft start, how to determine... if needed.   Jim Thomson
  • [Amps] Soft start, how to determine... if needed.   Dr. David Kirkby
    • [Amps] Soft start, how to determine... if needed.   Jim Tonne
      • [Amps] ***SPAM*** Re: Soft start, how to determine... if needed.   Dr. David Kirkby
• [Amps] Manfred's OK   Ward Silver
  • [Amps] Manfred's OK   mikea
• [Amps] Solid state relays and step start   Gary Schafer
  • [Amps] Solid state relays and step start   Jim Carr
    • [Amps] Solid state relays and step start   Paul Kraemer
      • [Amps] Solid state relays and step start   Jim Carr
    • [Amps] Solid state relays and step start   Hardy Landskov
      • [Amps] Solid state relays and step start   Roger
  • [Amps] Solid state relays and step start   Larry
• [Amps] Solid state relays and step start   TexasRF at aol.com
  • [Amps] Solid state relays and step start   Roger
• [Amps] Solid state relays and step start   TexasRF at aol.com
• [Amps] Solid state relays and step start   TexasRF at aol.com
• [Amps] Solid state relays and step start   Mike Saculla
  • [Amps] Solid state relays and step start   Roger
    • [Amps] Solid state relays and step start   Mike Saculla
• [Amps] FS: Parts that may be of some use in Amplifiers   Radio WC6W
  • [Amps] FS: Parts that may be of some use in Amplifiers   DAVE WHITE
• [Amps] WD-40 Is Not....   TexasRF at aol.com
  • [Amps] FW: WD-40 Is Not....   Charlie Young
    • [Amps] FW: WD-40 Is Not....   Paul Kraemer
      • [Amps] FW: WD-40 Is Not....   Roger
      • [Amps] FW: WD-40 Is Not.... a snake   Charles Harpole
      • [Amps] FW: WD-40 Is Not.... a snake   Mike
      • [Amps] FW: WD-40 Is Not....   donroden at hiwaay.net
    • [Amps] FW: WD-40 Is Not....   David H Craig
      • [Amps] WD-40, snaked, vermin and puddytats   DAVE WHITE
      • [Amps] WD-40, snaked, vermin and puddytats   Roger
      • [Amps] WD-40, snaked, vermin and puddytats   Charlie Young
      • [Amps] WD-40, snaked, vermin and puddytats   Gary Smith
  • [Amps] WD-40 Is Not....   Gary Smith
• [Amps] Outrageous Prices on Ebay   Lee Buller
  • [Amps] Outrageous Prices on Ebay   Roger
  • [Amps] Outrageous Prices on Ebay   Radio WC6W
    • [Amps] Outrageous Prices on Ebay   RICHARD SOLOMON
• [Amps] WD-40, snaked, vermin and puddytats   Dave White
• [Amps] Snaked vermin and puddycats   jonathan white
• [Amps] FW: WD-40 Is Not....   Patrick
• [Amps] WD-40, snaked, vermin and puddytats   DAVE WHITE
  • [Amps] WD-40, snaked, vermin and puddytats   James Colville
    • [Amps] WD-40, snaked, vermin and puddytats   donroden at hiwaay.net
      • [Amps] What tube is this?   Roger
      • [Amps] What tube is this?   DF3KV
      • [Amps] What tube is this?   DAVE WHITE
      • [Amps] What tube is this?   Alek Petkovic
      • [Amps] What tube is this?   Roger
  • [Amps] WD-40, snaked, vermin and puddytats   Gary Smith
• [Amps] 8877 Homebrew Pictures   monty taylor
• [Amps] WD-40, snaked, vermin and puddytats   Patrick
  • [Amps] WD-40, snaked, vermin and puddytats   RICHARD GEORGE
• [Amps] 3P transformers on 1P: brain twister for the day....   DAVE WHITE
• [Amps] Henry 8k, How they holding up?   Sam Carpenter
• [Amps] Wtd: SB-220 / HL-2200 Parts for rebuild   Beefus
• [Amps] GS35b Bias   MIKE DURKIN
• [Amps] GS35b Bias   MIKE DURKIN
• [Amps] GS35b Bias   TexasRF at aol.com
• [Amps] Ameritron relay   norm
  • [Amps] Ameritron relay   Carl
• [Amps] Ameritron relay   Gudguyham at aol.com
  • [Amps] Ameritron relay   Carl
• [Amps] Ameritron relay   Gudguyham at aol.com
  • [Amps] Ameritron relay   Carl
• [Amps] GS35b Bias   MIKE DURKIN
• [Amps] Fw: Ameritron relay   Gary Smith
• [Amps] DE-OX-IT   richard courtway
  • [Amps] DE-OX-IT   Roger
  • [Amps] DE-OX-IT   Bill, W6WRT
    • [Amps] DE-OX-IT   Robert Friess
      • [Amps] DE-OX-IT   Bill, W6WRT
      • [Amps] DE-OX-IT   Roger
      • [Amps] DE-OX-IT   Jim Carr
      • [Amps] DE-OX-IT   Mike McCarthy, W1NR
      • [Amps] DE-OX-IT   Ron Youvan
• [Amps] FW: GS35b Bias   MIKE DURKIN
  • [Amps] FW: GS35b Bias   Alek Petkovic
  • [Amps] FW: GS35b Bias   Gary Schafer
• [Amps] FW: GS35b Bias   MIKE DURKIN
• [Amps] SB-1000 on 10 Meters   Lee Buller
  • [Amps] SB-1000 on 10 Meters   Carl
  • [Amps] SB-1000 on 10 Meters   Bill, W6WRT
• [Amps] Solenoid polarity on DC reed relays   Bill VanAlstyne W5WVO
  • [Amps] Solenoid polarity on DC reed relays   Paul Christensen
    • [Amps] Solenoid polarity on DC reed relays   Jeff Carter
      • [Amps] Solenoid polarity on DC reed relays   Paul Christensen
      • [Amps] Solenoid polarity on DC reed relays   Paul Christensen
      • [Amps] Solenoid polarity on DC reed relays   Bill VanAlstyne W5WVO
• [Amps] Amps] Solenoid polarity on DC reed relays   Bill VanAlstyne W5WVO
  • [Amps] Amps] Solenoid polarity on DC reed relays   Rex Lint
  • [Amps] Amps] Solenoid polarity on DC reed relays   Radio WC6W
• [Amps] keyers heath HD-1410, ham keyer HK5A   Dan
• [Amps] snubbing diodes for vac relays / notes.   Jim Thomson
  • [Amps] snubbing diodes for vac relays / notes.   Bill VanAlstyne W5WVO
    • [Amps] snubbing diodes for vac relays / notes.   Pete Smith
• [Amps] FW: Amps] Solenoid polarity on DC reed relays   Rex Lint
• [Amps] reed relay /vac relay   Jim Thomson
  • [Amps] reed relay /vac relay   Carl
• [Amps] Henry 4K Ultra Power Supply schematic   Bob - KL5E
• [Amps] WD7S Display Board For Sale   James Colville
• [Amps] WTB: 8930, 4CX400A, GS-36b Tubes   Robin Midgett K4IDC
  • [Amps] WTB: 8930, 4CX400A, GS-36b Tubes   Carl
• [Amps] Clipperton-L parasitic suppressors   Larry
  • [Amps] Clipperton-L parasitic suppressors   Alek Petkovic
    • [Amps] Clipperton-L parasitic suppressors   Carl
      • [Amps] Clipperton-L parasitic suppressors   Carl
      • [Amps] Clipperton-L parasitic suppressors   Rob Stampfli
      • [Amps] Clipperton-L parasitic suppressors   Alek Petkovic
      • [Amps] Clipperton-L parasitic suppressors   Roger
      • [Amps] Clipperton-L parasitic suppressors   Larry
      • [Amps] Clipperton-L parasitic suppressors   Roger
      • [Amps] Clipperton-L parasitic suppressors   Alek Petkovic
      • [Amps] Clipperton-L parasitic suppressors   Carl
      • [Amps] Clipperton-L parasitic suppressors   Ian White GM3SEK
      • [Amps] Clipperton-L parasitic suppressors   Carl
      • [Amps] Clipperton-L parasitic suppressors   Joe Subich, W4TV
      • [Amps] Clipperton-L parasitic suppressors   Ian White GM3SEK
      • [Amps] Clipperton-L parasitic suppressors   Cecil Acuff
      • [Amps] Clipperton-L parasitic suppressors   Roger
      • [Amps] Clipperton-L parasitic suppressors   Carl
      • [Amps] Clipperton-L parasitic suppressors   Alek Petkovic
      • [Amps] Clipperton-L parasitic suppressors   Carl
      • [Amps] Clipperton-L parasitic suppressors   Alek Petkovic
      • [Amps] Clipperton-L parasitic suppressors   Bill, W6WRT
      • [Amps] Clipperton-L parasitic suppressors   Bill, W6WRT
      • [Amps] Clipperton-L parasitic suppressors   Carl
      • [Amps] Clipperton-L parasitic suppressors   Bill, W6WRT
      • [Amps] Clipperton-L parasitic suppressors   Carl
  • [Amps] Clipperton-L parasitic suppressors   Tim Long
• [Amps] 1000MP and MLA-2500   Tom Martin
• [Amps] Clipperton-L parasitic suppressors   Larry
• [Amps] Clipperton-L parasitic suppressors   Colin Lamb
• [Amps] 100 Ohm 2W   Richard Schmuke
  • [Amps] 100 Ohm 2W   Carl
• [Amps] Clipperton-L parasitic suppressors   Dave White
  • [Amps] Clipperton-L parasitic suppressors   Carl
• [Amps] Revamping a really ugly amp   Rex Lint
  • [Amps] Revamping a really ugly amp   Radio WC6W
    • [Amps] Revamping a really ugly amp   Rex Lint
      • [Amps] Revamping a really ugly amp   Roger
  • [Amps] Revamping a really ugly amp   Robert Morris
  • [Amps] Revamping a really ugly amp   Bill, W6WRT
• [Amps] MRF-140 Matched Pair Required?   James Colville
• [Amps] Revamping a really ugly amp   Dave White
  • [Amps] Revamping a really ugly amp   Paul Kraemer
• [Amps] Fw: Revamping a really ugly amp   la7sl Nils Petter
  • [Amps] Fw: Revamping a really ugly amp   JTB ô¿ô
• [Amps] Revamping a really ugly amp   Rex Lint
  • [Amps] Revamping a really ugly amp   Carl
    • [Amps] Revamping a really ugly amp   Dan
    • [Amps] Revamping a really ugly amp   Roger
      • [Amps] Revamping a really ugly amp   Rex Lint
      • [Amps] Revamping a really ugly amp   Martin Flynn
      • [Amps] Revamping a really ugly amp   Roger
• [Amps] Revamping a really ugly amp   Dave White
• [Amps] 100 Ohm 2W   Steve Thompson
  • [Amps] 100 Ohm 2W   Carl
    • [Amps] 100 Ohm 2W   Steve Thompson
      • [Amps] 100 Ohm 2W   Carl
• [Amps] Clipperton-L parasitic suppressors   Dave White
  • [Amps] Clipperton-L parasitic suppressors   Carl
    • [Amps] Clipperton-L parasitic suppressors   Bill, W6WRT
      • [Amps] Clipperton-L parasitic suppressors   Carl
      • [Amps] Clipperton-L parasitic suppressors   Bill, W6WRT
      • [Amps] Clipperton-L parasitic suppressors   Carl
      • [Amps] Clipperton-L parasitic suppressors   Jeff Blaine AC0C
  • [Amps] Clipperton-L parasitic suppressors   Bill, W6WRT
    • [Amps] Clipperton-L parasitic suppressors   Carl
      • [Amps] Clipperton-L parasitic suppressors   Bill, W6WRT
      • [Amps] Clipperton-L parasitic suppressors   Carl
      • [Amps] Clipperton-L parasitic suppressors   Bill, W6WRT
      • [Amps] Clipperton-L parasitic suppressors   Carl
      • [Amps] Clipperton-L parasitic suppressors   Bill, W6WRT
      • [Amps] Clipperton-L parasitic suppressors   Carl
• [Amps] LK500ZB (2 x 3-500Z), most likely cause of zap/arc?   Carl Clawson
  • [Amps] LK500ZB (2 x 3-500Z), most likely cause of zap/arc?   bill price
  • [Amps] LK500ZB (2 x 3-500Z), most likely cause of zap/arc?   Carl
    • [Amps] LK500ZB (2 x 3-500Z), most likely cause of zap/arc?   bill price
    • [Amps] LK500ZB (2 x 3-500Z), most likely cause of zap/arc?   bill price
    • [Amps] LK500ZB (2 x 3-500Z), most likely cause of zap/arc?   Carl Clawson
      • [Amps] LK500ZB (2 x 3-500Z), most likely cause of zap/arc?   Carl
      • [Amps] LK500ZB (2 x 3-500Z), most likely cause of zap/arc?   Carl Clawson
      • [Amps] LK500ZB (2 x 3-500Z), most likely cause of zap/arc?   Carl Clawson
      • [Amps] LK500ZB (2 x 3-500Z), most likely cause of zap/arc?   Carl
      • [Amps] LK500ZB (2 x 3-500Z), most likely cause of zap/arc?   Carl Clawson
      • [Amps] LK500ZB (2 x 3-500Z), most likely cause of zap/arc?   Carl
      • [Amps] LK500ZB (2 x 3-500Z), most likely cause of zap/arc?   Carl Clawson
      • [Amps] LK500ZB (2 x 3-500Z), most likely cause of zap/arc?   Carl
      • [Amps] LK500ZB (2 x 3-500Z), most likely cause   Carl Clawson
      • [Amps] LK500ZB (2 x 3-500Z), most likely cause   Carl
      • [Amps] Teflon Caps   Radio WC6W
      • [Amps] Teflon Caps   Carl
• [Amps] Advance A1500 48VOLT switched mode PSU   Jonathan white
• [Amps] Amp supply co?   Luc Leblanc
• [Amps] (no subject)   richard courtway
• [Amps] GI7B Question - Input Matching   Lee Buller
  • [Amps] GI7B Question - Input Matching   ZL2AAA
    • [Amps] GI7B Question - Input Matching   James Colville
      • [Amps] GI7B Question - Input Matching   Roger
      • [Amps] GI7B Question - Input Matching   Carl
      • [Amps] GI7B Question - Input Matching   Joe Subich, W4TV
      • [Amps] GI7B Question - Input Matching   Carl
  • [Amps] GI7B Question - Input Matching   Jeff Blaine AC0C
  • [Amps] GI7B Question - Input Matching   DF3KV
• [Amps] wall clearance   Richard Schmuke
• [Amps] GI7B Question-Input matching   Jim Thomson
• [Amps] AMERITRON EBS-1H   richard courtway
• [Amps] PTFE dielectricum variable cap   pc5m, Carel
  • [Amps] PTFE dielectricum variable cap   Ron Youvan
  • [Amps] PTFE dielectricum variable cap   la7sl Nils Petter
    • [Amps] PTFE dielectricum variable cap   pfizenmayer
  • [Amps] PTFE dielectricum variable cap   Dr. David Kirkby
  • [Amps] PTFE dielectricum variable cap   DF3KV
• [Amps] PTFE dielectricum variable cap   TexasRF at aol.com
  • [Amps] PTFE dielectricum variable cap   donroden at hiwaay.net
• [Amps] PTFE dielectricum variable cap   la7sl Nils Petter
• [Amps] PTFE dielectricum variable cap   ToddRoberts2001 at aol.com
• [Amps] PTFE dielectricum variable cap   TexasRF at aol.com
• [Amps] PTFE dielectricum variable cap   TexasRF at aol.com
• [Amps] PTFE dielectricum variable cap   ToddRoberts2001 at aol.com
• [Amps] HV Xformer for TT10AL   BERNIE J SASEK
• [Amps] Placement of plate r-f choke bypass capacitor   David J Windisch
  • [Amps] Placement of plate r-f choke bypass capacitor   Bill, W6WRT
• [Amps] PTFE dielectricum variable cap   herzog at frontiernet.net at frontiernet.net
• [Amps] Teflon power capacitor   John Lyles
  • [Amps] Teflon power capacitor   David G4FTC
• [Amps] OT the 50 cent-ers   Charles Harpole
  • [Amps] OT the 50 cent-ers   Jeff Blaine AC0C
  • [Amps] OT the 50 cent-ers   Carl
    • [Amps] OT the 50 cent-ers   David Jordan
    • [Amps] OT the 50 cent-ers   Pete Smith
• [Amps] Amp Supply LK550   Sam Carpenter
  • [Amps] Amp Supply LK550   Carl
• [Amps] 3-500z Sources/Recommendations   Roger Cooper
• [Amps] Off topic posts   George Fremin III
• [Amps] Building 833 Amplifier. Hints and Suggestions?   Greg Weinfurtner
  • [Amps] Building 833 Amplifier. Hints and Suggestions?   Ron Youvan
  • [Amps] Building 833 Amplifier. Hints and Suggestions?   Joe Subich, W4TV
  • [Amps] Building 833 Amplifier. Hints and Suggestions?   Edward Swynar
  • [Amps] Building 833 Amplifier. Hints and Suggestions?   Roger
    • [Amps] Building 833 Amplifier. Hints and Suggestions?   Paul Kraemer
    • [Amps] 2c39 from where ?   Andy GD0TEP
      • [Amps] 2c39 from where ?   Andy GD0TEP
    • [Amps] Building 833 Amplifier. Hints and Suggestions?   Joe Subich, W4TV
      • [Amps] Building 833 Amplifier. Hints and Suggestions?   Roger
      • [Amps] Building 833 Amplifier. Hints and Suggestions?   w2xj
      • [Amps] Building 833 Amplifier. Hints and Suggestions?   WA3GIN
      • [Amps] Building 833 Amplifier. Hints and Suggestions?   Bill Fuqua
      • [Amps] Building 833 Amplifier. Hints and Suggestions?   Paul Christensen
      • [Amps] Building 833 Amplifier. Hints and Suggestions?   Carl
      • [Amps] Building 833 Amplifier. Hints and Suggestions?   Paul Christensen
      • [Amps] Building 833 Amplifier. Hints and Suggestions?   w2xj
      • [Amps] Building 833 Amplifier. Hints and Suggestions?   Carl
  • [Amps] Building 833 Amplifier. Hints and Suggestions?   Bill Fuqua
• [Amps] PTFE dielectricum variable cap   pc5m, Carel
• [Amps] 833 amp   John Lyles
  • [Amps] 833 amp   Carl
• [Amps] Teflon dielectric variable capacitor   John Lyles
• [Amps] 1 Radio + 2 Amps + 2 Antennes   Eduardo de Vera Mateo
• [Amps] 833 amp replies and website   Greg Weinfurtner
• [Amps] Teflon dielectric vraiable caps.. another thought.   Jim Thomson
• [Amps] Teflon dielectric vraiable caps.. another thought.   TexasRF at aol.com
• [Amps] placement of RF choke bypass cap.   Jim Thomson
  • [Amps] placement of RF choke bypass cap.   Carl
  • [Amps] placement of RF choke bypass cap.   Bill, W6WRT
    • [Amps] placement of RF choke bypass cap.   Gary Schafer
    • [Amps] placement of RF choke bypass cap.   Carl
      • [Amps] placement of RF choke bypass cap.   Bill, W6WRT
• [Amps] Amp supply co?   Luc Leblanc
• [Amps] Teflon Caps   ToddRoberts2001 at aol.com
  • [Amps] Teflon Caps   Carl
    • [Amps] Teflon Caps   Bill Fuqua
      • [Amps] Teflon Caps   Ron Youvan
      • [Amps] Teflon Caps   donroden at hiwaay.net
    • [Amps] Teflon Caps   Bill, W6WRT
• [Amps] placement of RF choke bypass cap.   Bill, W6WRT
  • [Amps] placement of RF choke bypass cap.   Gary Schafer
• [Amps] Are exciter RF delays to prevent hot keying cataloged anywhere?   Rob Stampfli
  • [Amps] Are exciter RF delays to prevent hot keying cataloged anywhere?   Larry Benko
    • [Amps] Are exciter RF delays to prevent hot keying cataloged anywhere?   Rob Stampfli
  • [Amps] Are exciter RF delays to prevent hot keying cataloged anywhere?   James Colville
• [Amps] 91B problem in Paraguay   DALE LONG
  • [Amps] 91B problem in Paraguay   Fortra
  • [Amps] 91B problem in Paraguay   Ian White GM3SEK
  • [Amps] 91B problem in Paraguay   Zeitler, Lane LT, FST-1
• [Amps] Xcvr RF delay master list.   Jim Thomson
• [Amps] placement of RF choke bypass cap.   Bill, W6WRT
  • [Amps] placement of RF choke bypass cap.   Gary Schafer
• [Amps] New Builder   Richard Schmuke
• [Amps] Tuned Input for G-G 50Mhz amp   4z4tl at iarc.org
  • [Amps] Tuned Input for G-G 50Mhz amp   Carl
    • [Amps] Tuned Input for G-G 50Mhz amp   TL_IARC
      • [Amps] Tuned Input for G-G 50Mhz amp   Zeitler, Lane LT, FST-1
      • [Amps] Tuned Input for G-G 50Mhz amp   Carl
      • [Amps] Tuned Input for G-G 50Mhz amp   Larry Benko
      • [Amps] Tuned Input for G-G 50Mhz amp   Hardy Landskov
  • [Amps] Tuned Input for G-G 50Mhz amp   Han Higasa
    • [Amps] Tuned Input for G-G 50Mhz amp   mikea
      • [Amps] Tuned Input for G-G 50Mhz amp   Han Higasa
      • [Amps] Tuned Input for G-G 50Mhz amp   mikea
    • [Amps] Tuned Input for G-G 50Mhz amp   David H Craig
      • [Amps] Tuned Input for G-G 50Mhz amp   donroden at hiwaay.net
      • [Amps] Tuned Input for G-G 50Mhz amp   Bill, W6WRT
• [Amps] placement of RF choke bypass cap.   Bill, W6WRT
  • [Amps] placement of RF choke bypass cap.   Gary Schafer
• [Amps] yokagawa pl93   MIKE DURKIN
• [Amps] "Pi" or "Tee" input circuit for a 50Mhz   TL_IARC
  • [Amps] "Pi" or "Tee" input circuit for a 50Mhz   David H Craig
• [Amps] placement of RF choke bypass cap.   Bill, W6WRT
  • [Amps] placement of RF choke bypass cap.   Gary Schafer
    • [Amps] placement of RF choke bypass cap.   David Cutter
      • [Amps] placement of RF choke bypass cap.   Gary Schafer
      • [Amps] placement of RF choke bypass cap.   Carl
      • [Amps] placement of RF choke bypass cap.   Bill, W6WRT
      • [Amps] placement of RF choke bypass cap.   Carl
      • [Amps] placement of RF choke bypass cap.   Bill, W6WRT
      • [Amps] placement of RF choke bypass cap.   Carl
      • [Amps] placement of RF choke bypass cap.   Vic K2VCO
      • [Amps] placement of RF choke bypass cap.   Bill, W6WRT
• [Amps] placement of RF choke bypass cap.   David Cutter
• [Amps] Utilization of old TV transformer   Vic K2VCO
  • [Amps] Utilization of old TV transformer   Fuqua, Bill L
  • [Amps] Utilization of old TV transformer   Carl
  • [Amps] Utilization of old TV transformer   Zeitler, Lane LT, FST-1
• [Amps] Utilization of old TV transformer   Vic K2VCO
• [Amps] placement of RF choke bypass cap.   Bill, W6WRT
  • [Amps] placement of RF choke bypass cap.   Roger
    • [Amps] placement of RF choke bypass cap.   Carl
      • [Amps] placement of RF choke bypass cap.   Roger
    • [Amps] placement of RF choke bypass cap.   Bill, W6WRT
      • [Amps] placement of RF choke bypass cap.   Gary Schafer
      • [Amps] placement of RF choke bypass cap.   Roger
    • [Amps] placement of RF choke bypass cap.   Bill, W6WRT
      • [Amps] placement of RF choke bypass cap.   Carl
  • [Amps] placement of RF choke bypass cap.   Gary Schafer
    • [Amps] placement of RF choke bypass cap.   Roger
• [Amps] B & W 800 plate choke   Zeitler, Lane LT, FST-1
  • [Amps] B & W 800 plate choke   Carl
• [Amps] Utilization of old TV transformer   Manfred Mornhinweg
  • [Amps] Utilization of old TV transformer   Vic K2VCO
• [Amps] placement of RF choke bypass cap.   Bill, W6WRT
  • [Amps] placement of RF choke bypass cap.   Gary Schafer
• [Amps] placement of RF choke bypass cap.   Bill, W6WRT
• [Amps] placement of RF choke bypass cap.   Bill, W6WRT
• [Amps] placement of RF choke bypass cap.   Bill, W6WRT
  • [Amps] placement of RF choke bypass cap.   Gary Schafer
• [Amps] placement of RF choke bypass cap.   Bill, W6WRT
  • [Amps] placement of RF choke bypass cap.   Larry Benko
    • [Amps] placement of RF choke bypass cap.   Bill, W6WRT
      • [Amps] placement of RF choke bypass cap.   Roger
      • [Amps] placement of RF choke bypass cap.   Bill, W6WRT
      • [Amps] placement of RF choke bypass cap.   Roger
      • [Amps] placement of RF choke bypass cap.   Ken
      • [Amps] placement of RF choke bypass cap.   Bill, W6WRT
      • [Amps] placement of RF choke bypass cap.   pc5m, Carel
      • [Amps] placement of RF choke bypass cap.   Bill, W6WRT
      • [Amps] placement of RF choke bypass cap.   pc5m, Carel
      • [Amps] placement of RF choke bypass cap.   pc5m, Carel
      • [Amps] placement of RF choke bypass cap.   Bill, W6WRT
      • [Amps] placement of RF choke bypass cap.   pc5m, Carel
      • [Amps] placement of RF choke bypass cap.   Gary Schafer
      • [Amps] placement of RF choke bypass cap.   Frank T Brady
      • [Amps] placement of RF choke bypass cap.   Larry Benko
      • [Amps] placement of RF choke bypass cap.   Gary Schafer
      • [Amps] placement of RF choke bypass cap.   Bill, W6WRT
      • [Amps] placement of RF choke bypass cap.   Gary Schafer
      • [Amps] placement of RF choke bypass cap.   Hardy Landskov
      • [Amps] placement of RF choke bypass cap.   Roger
      • [Amps] placement of RF choke bypass cap.   Bill, W6WRT
  • [Amps] placement of RF choke bypass cap. (Results of experiment)   Larry Benko
    • [Amps] placement of RF choke bypass cap. (Results of experiment)   K1TTT
    • [Amps] placement of RF choke bypass cap. (Results of experiment)   David Cutter
      • [Amps] placement of RF choke bypass cap. (Results of experiment)   Larry Benko
    • [Amps] placement of RF choke bypass cap. (Results of experiment)   pc5m, Carel
      • [Amps] placement of RF choke bypass cap. (Results of experiment)   Roger
      • [Amps] placement of RF choke bypass cap. (Results of experiment)   Larry Benko
      • [Amps] placement of RF choke bypass cap. (Results of experiment)   Roger
      • [Amps] placement of RF choke bypass cap. (Results of experiment)   pc5m, Carel
      • [Amps] placement of RF choke bypass cap. (Results of experiment)   Bill, W6WRT
• [Amps] exciter RF delays...   Roy
• [Amps] placement of RF choke...   Roy
• [Amps] "Pi" or a "Tee" input circuit   TL_IARC
• [Amps] (fwd) dipole   Bill, W6WRT
• [Amps] Fw: 91B problem in Paraguay   Fortra
• [Amps] 91B problem in Paraguay   DALE LONG
  • [Amps] 91B problem in Paraguay   Zeitler, Lane LT, FST-1
• [Amps] B&W 800 RF choke   John Lyles
  • [Amps] B&W 800 RF choke   Zeitler, Lane LT, FST-1
• [Amps] 91B problem in Paraguay   John
• [Amps] how much C in PS is too much?   Zeitler, Lane LT, FST-1
  • [Amps] how much C in PS is too much?   Bill, W6WRT
• [Amps] "Pi" or "Tee" input circuit for a 50Mhz   TexasRF at aol.com
• [Amps] big capacitor in HV PS   John Lyles
  • [Amps] big capacitor in HV PS   Roger
    • [Amps] big capacitor in HV PS   Radio WC6W
      • [Amps] big capacitor in HV PS   RICHARD SOLOMON
• [Amps] Tuned input for GG 50 mhz amp   Jim Thomson
• [Amps] 2A slo blow in step start   Jim Thomson
  • [Amps] 2A slo blow in step start   Zeitler, Lane LT, FST-1
    • [Amps] 2A slo blow in step start   James Colville
• [Amps] B+W 800 choke.   Jim Thomson
• [Amps] how much C in PS is too much ?   Jim Thomson
• [Amps] how much C in PS is too much?   Paul Gerhardt
  • [Amps] how much C in PS is too much?   John Parkins
• [Amps] Question about Transformers   Lee Buller
  • [Amps] Question about Transformers   Carl
• [Amps] placement of RF choke bypass cap.   David J Windisch
  • [Amps] placement of RF choke bypass cap.   Bill, W6WRT
    • [Amps] placement of RF choke bypass cap.   DF3KV
      • [Amps] Plate chokes (was: Re: placement of RF choke bypass cap.)   Vic K2VCO
      • [Amps] Plate chokes (was: Re: placement of RF choke bypass cap.)   Gary Schafer
      • [Amps] Plate chokes (was: Re: placement of RF choke bypass cap.)   Carl
      • [Amps] Plate chokes (was: Re: placement of RF choke bypass cap.)   Gary Schafer
• [Amps] Matching GU-74Bs   Michael Tope
  • [Amps] Matching GU-74Bs   Roger
    • [Amps] Matching GU-74Bs   James Colville
      • [Amps] Matching GU-74Bs   Roger
      • [Amps] Matching GU-74Bs   Carl
      • [Amps] Matching GU-74Bs   gdaught6 at stanford.edu
• [Amps] How much C in PS is too much.   Jim Thomson
  • [Amps] How much C in PS is too much.   donroden at hiwaay.net
• [Amps] How much C in PS is too much ?   Jim Thomson
  • [Amps] How much C in PS is too much ?   DF3KV
  • [Amps] How much C in PS is too much ?   Bill, W6WRT
    • [Amps] How much C in PS is too much ?   Carl
    • [Amps] How much C in PS is too much ?   Rob Stampfli
  • [Amps] How much C in PS is too much ?   Bill, W6WRT
• [Amps] Big cap in HV PS   Jim Thomson
  • [Amps] Big cap in HV PS   Roger
• [Amps] How much C in PS is too much ?   Jim Thomson
• [Amps] choke - cap filter network in PS   Zeitler, Lane LT, FST-1
  • [Amps] choke - cap filter network in PS   Carl
    • [Amps] choke - cap filter network in PS   Zeitler, Lane LT, FST-1
    • [Amps] choke - cap filter network in PS   Carl
  • [Amps] choke - cap filter network in PS   Ron Youvan
  • [Amps] choke - cap filter network in PS   Hardy Landskov
• [Amps] Drake L-7 problem   Roger D Johnson
  • [Amps] Drake L-7 problem   Carl
• [Amps] How much C in PS is too much   Paul Decker
• [Amps] When to stop - capacitors for power supplies   John Lyles
• [Amps] Hallicrafters link   Phil LaMarche
• [Amps] Tuned Input for G-G 50Mhz amp   TexasRF at aol.com
  • [Amps] Tuned Input for G-G 50Mhz amp   Carl
    • [Amps] Tuned Input for G-G 50Mhz amp   Ron Youvan
  • [Amps] Tuned Input for G-G 50Mhz amp   Bill, W6WRT
• [Amps] B&W PT-2500A HF Amplifier   Tony
  • [Amps] B&W PT-2500A HF Amplifier (Taken)   Tony
  • [Amps] B&W PT-2500A HF Amplifier   Gary Smith
    • [Amps] B&W PT-2500A HF Amplifier   Carl
      • [Amps] B&W PT-2500A HF Amplifier   Fern
      • [Amps] B&W PT-2500A HF Amplifier   Carl
      • [Amps] B&W PT-2500A HF Amplifier   Zeitler, Lane LT, FST-1
      • [Amps] B&W PT-2500A HF Amplifier   Zeitler, Lane LT, FST-1
      • [Amps] B&W PT-2500A HF Amplifier   Carl
      • [Amps] B&W PT-2500A HF Amplifier   Zeitler, Lane LT, FST-1
      • [Amps] B&W PT-2500A HF Amplifier   Dwayne
      • [Amps] B&W PT-2500A HF Amplifier   Carl
      • [Amps] B&W PT-2500A HF Amplifier   Fern
      • [Amps] B&W PT-2500A HF Amplifier   Zeitler, Lane LT, FST-1
      • [Amps] B&W PT-2500A HF Amplifier   Carl
• [Amps] placement of RF choke bypass cap.   Bill, W6WRT
  • [Amps] placement of RF choke bypass cap.   Gary Schafer
  • [Amps] placement of RF choke bypass cap.   Alex Eban
• [Amps] ripple in B+ supply   Jim Thomson
  • [Amps] ripple in B+ supply   Gary Schafer
  • [Amps] ripple in B+ supply   Alex Eban
  • [Amps] ripple in B+ supply   Bill, W6WRT
    • [Amps] ripple in B+ supply   Jim Tonne
      • [Amps] ripple in B+ supply   Jim Tonne
      • [Amps] ripple in B+ supply   Bill, W6WRT
      • [Amps] ripple in B+ supply   Jim Forsyth
    • [Amps] ripple in B+ supply   Ron Youvan
• [Amps] Good engineering   Jim Thomson
  • [Amps] Good engineering   Zeitler, Lane LT, FST-1
  • [Amps] Good engineering   Bill, W6WRT
    • [Amps] Good engineering   donroden at hiwaay.net
      • [Amps] Good engineering   Carl
      • [Amps] Good engineering   mikea
      • [Amps] Good engineering   Roger
  • [Amps] Good engineering   Bill, W6WRT
  • [Amps] Good engineering   Alex Eban
  • [Amps] Good engineering   Alex Eban
    • [Amps] Good engineering   Roger
  • [Amps] Good engineering   David Cutter
  • [Amps] Good engineering   Jeff Blaine AC0C
    • [Amps] Good engineering   Bill, W6WRT
      • [Amps] Good engineering   Bill Fuqua
      • [Amps] Good engineering   Edward Swynar
      • [Amps] Good engineering   Bill, W6WRT
      • [Amps] Good engineering   Edward Swynar
      • [Amps] Good engineering   Bill, W6WRT
      • [Amps] Good engineering   Gary Smith
      • [Amps] Good engineering   Edward Swynar
      • [Amps] Good engineering   Bill, W6WRT
• [Amps] placement of RF choke bypass cap.   Bill, W6WRT
  • [Amps] placement of RF choke bypass cap.   Gary Schafer
• [Amps] ripple in B+ supply.   Jim Thomson
• [Amps] ALS-600/EB-104   Mike Short
• [Amps] Alpha 76/78 front panel 'flag' buttons   Charles Johnson
• [Amps] multiplex??   Zeitler, Lane LT, FST-1
  • [Amps] multiplex??   Carl
• [Amps] MUST read 811A amp project   Zeitler, Lane LT, FST-1
• [Amps] When to stop.. caps for power supplies.   Jim Thomson
• [Amps] Good Engineering.   Jim Thomson
  • [Amps] Good Engineering.   Bill, W6WRT
    • [Amps] Good Engineering.   James Colville
• [Amps] RF Parts plate choke   Jim Thomson
  • [Amps] RF Parts plate choke   Carl
  • [Amps] RF Parts plate choke   DF3KV
• [Amps] Good engineering   Jim Thomson
• [Amps] Good engineering   Jim Thomson
• [Amps] 30-L1 available   gdaught6 at stanford.edu
• [Amps] Alpha 76/78 front panel 'flag' buttons   James Irving
  • [Amps] Alpha 76/78 front panel 'flag' buttons   Jim Barber
• [Amps] Good engineering   Paul Decker
  • [Amps] Good engineering   Roger
    • [Amps] Good engineering   David Cutter
      • [Amps] Good engineering   Roger
    • [Amps] Good engineering   Edward Swynar
      • [Amps] Good engineering   Cecil Acuff
• [Amps] Good engineering   Dave White
• [Amps] placement of RF choke bypass cap.   Bill, W6WRT
  • [Amps] placement of RF choke bypass cap.   Carl
    • [Amps] placement of RF choke bypass cap.   Bill, W6WRT
      • [Amps] placement of RF choke bypass cap.   DF3KV
      • [Amps] placement of RF choke bypass cap.   Ian White GM3SEK
      • [Amps] placement of RF choke bypass cap.   la7sl Nils Petter
      • [Amps] placement of RF choke bypass cap.   Bill, W6WRT
      • [Amps] placement of RF choke bypass cap.   pc5m, Carel
      • [Amps] placement of RF choke bypass cap.   Carl
  • [Amps] placement of RF choke bypass cap.   Gary Schafer
    • [Amps] placement of RF choke bypass cap.   DF3KV
      • [Amps] placement of RF choke bypass cap.   Gary Schafer
      • [Amps] placement of RF choke bypass cap.   Carl
• [Amps] Plate chokes   Vic K2VCO
  • [Amps] Plate chokes   Dan
  • [Amps] Plate chokes   Roger
    • [Amps] Plate chokes   Radio WC6W
• [Amps] Good Engineering..   Robert Briggs
  • [Amps] Good Engineering..   Fuqua, Bill L
    • [Amps] Good Engineering..   Bill, W6WRT
      • [Amps] Why people don't build amps.   Roger
      • [Amps] Why people don't build amps.   Cecil Acuff
      • [Amps] Why people don't build amps.   Shon Edwards
      • [Amps] finding used parts to build   Zeitler, Lane LT, FST-1
      • [Amps] Why people don't build amps.   Roger
      • [Amps] Why people don't build amps.   donroden at hiwaay.net
      • [Amps] Why people don't build amps.   Carl
      • [Amps] Why people don't build amps.   Carl
      • [Amps] Why people don't build amps. $$$ and Shop Class   Lee Buller
      • [Amps] Transformers for HB?   Carl
      • [Amps] Transformers for HB?   Bill, W6WRT
      • [Amps] Transformers for HB?   Roger
      • [Amps] Transformers for HB?   Zeitler, Lane LT, FST-1
      • [Amps] Why people don't build amps. $$$ and Shop Class   Bill VanAlstyne W5WVO
      • [Amps] Why people don't build amps. $$$ and Shop Class   Zeitler, Lane LT, FST-1
• [Amps] placement of RF choke bypass cap.   Bill, W6WRT
  • [Amps] placement of RF choke bypass cap.   Carl
  • [Amps] placement of RF choke bypass cap.   Gary Schafer
    • [Amps] placement of RF choke bypass cap.   Carl
• [Amps] Fw: B&W PT-2500A HF Amplifier   Carl
  • [Amps] Fw: B&W PT-2500A HF Amplifier   Zeitler, Lane LT, FST-1
• [Amps] 'Good engineering'   Jim Thomson
  • [Amps] 'Good engineering'   James Colville
  • [Amps] 'Good engineering'   Zeitler, Lane LT, FST-1
  • [Amps] 'Good engineering'   Bill, W6WRT
  • [Amps] 'Good engineering'   Bill, W6WRT
• [Amps] ripple in B+ supply.   Jim Thomson
  • [Amps] ripple in B+ supply.   Ian White GM3SEK
  • [Amps] ripple in B+ supply.   Bill, W6WRT
  • [Amps] ripple in B+ supply.   Bill, W6WRT
    • [Amps] ripple in B+ supply.   Alex Eban
      • [Amps] ripple in B+ supply.   Gary Schafer
      • [Amps] ripple in B+ supply.   Bill, W6WRT
      • [Amps] ripple in B+ supply.   Bill, W6WRT
• [Amps] voltage spike anomoly   Jim Thomson
• [Amps] ripple in B+ supply.   Paul Decker
• [Amps] Good Engineering.   James Colville
• [Amps] L-4PS Transformer Buzz   Ryan Foster
  • [Amps] L-4PS Transformer Buzz   Michael Tope
• [Amps] Seeking an old article ...   Radio WC6W
• [Amps] Alpha 91B input relay noise....   John
  • [Amps] Alpha 91B input relay noise....   Bill, W6WRT
• [Amps] Why people don't build amps.   dd3ly at arcor.de
  • [Amps] Why people don't build amps.   Ron Youvan
    • [Amps] Why people don't build amps.   Carl
      • [Amps] Why people don't build amps.   Roger
  • [Amps] Why people don't build amps.   Alex Eban
    • [Amps] Why people don't build amps.   Fuqua, Bill L
• [Amps] Tuned Input for G-G 50Mhz amp   TL_IARC
• [Amps] Why people don't build amps.   Andy
• [Amps] Dentron Clipperton L power supply   johne tds.net
  • [Amps] Dentron Clipperton L power supply   Alek Petkovic
• [Amps] must read on eham "amplifiers" forum   Zeitler, Lane LT, FST-1
• [Amps] Amplifier 2x3-500Z   Gino
  • [Amps] Amplifier 2x3-500Z   Bill, W6WRT
  • [Amps] Amplifier 2x3-500Z   Carl
  • [Amps] Amplifier 2x3-500Z   Gary Schafer
• [Amps] 'Good engineering'   Jim Thomson
  • [Amps] 'Good engineering'   Roger
    • [Amps] 'Good engineering'   Bill, W6WRT
  • [Amps] 'Good engineering'   Bill, W6WRT
    • [Amps] 'Good engineering'   Alek Petkovic
      • [Amps] 'Good engineering'   Paul Christensen
      • [Amps] 'Good engineering'   Dwayne
      • [Amps] 'Good engineering'   Edward Swynar
      • [Amps] 'Good engineering'   donroden at hiwaay.net
• [Amps] building amps.   Jim Thomson
• [Amps] Fw: building amps.   Jim Thomson
• [Amps] Why people don't build amps.   Richard Schmuke
  • [Amps] Why people don't build amps.   Carl
  • [Amps] Why people don't build amps.   Zeitler, Lane LT, FST-1
• [Amps] homebrewing   Rob Atkinson
• [Amps] placement of RF choke bypass cap   Roy
• [Amps] Why people don't build amps. (Roger)   Paul Gerhardt
• [Amps] Why people don't build amps.   Paul Decker
  • [Amps] Why people don't build amps.   David Cutter
• [Amps] building your own amplifier again   John Lyles
  • [Amps] building your own amplifier again   Carl
• [Amps] Why people BUILD amps today   Greg Weinfurtner
• [Amps] AL82 to 10 Meters   Charlie Young
• [Amps] AL82 to 10 Meters   Charlie Young
  • [Amps] AL82 to 10 Meters   Carl
• [Amps] Contact Info   Cecil Acuff
• [Amps] 'good engineering'   Jim Thomson
  • [Amps] 'good engineering'   Bill, W6WRT
    • [Amps] 'good engineering'   Jim Tonne
      • [Amps] 'good engineering'   Bill, W6WRT
    • [Amps] 'good engineering'   Paul Christensen
      • [Amps] 'good engineering'   Bill, W6WRT
    • [Amps] 'good engineering'   Jim Thomson
      • [Amps] 'good engineering'   Bill, W6WRT
      • [Amps] 'good engineering'   Alex Eban
      • [Amps] 'good engineering'   Jan Erik Holm
      • [Amps] 'good engineering'   David Cutter
      • [Amps] 'good engineering'   Carl
      • [Amps] 'good engineering'   Bill, W6WRT
      • [Amps] 'good engineering'   Ron Youvan
      • [Amps] 'good engineering'   Bill, W6WRT
      • [Amps] 'good engineering'   Bill, W6WRT
      • [Amps] 'good engineering'   Bill, W6WRT
      • [Amps] 'good engineering'   Gary Schafer
      • [Amps] 'good engineering'   Bill, W6WRT
      • [Amps] 'good engineering'   Alex Eban
  • [Amps] 'good engineering'   James Colville
• [Amps] Arnold Howell contact info.. for YC-156's + pole pigs   Jim Thomson
  • [Amps] Arnold Howell contact info.. for YC-156's + pole pigs   Roger
    • [Amps] Arnold Howell contact info.. for YC-156's + pole pigs   Tim Duffy K3LR
    • [Amps] Arnold Howell contact info.. for YC-156's + pole pigs   Tim Duffy K3LR
• [Amps] Another source for YC-156's   Jim Thomson
  • [Amps] Another source for YC-156's   Zeitler, Lane LT, FST-1
    • [Amps] Another source for YC-156's   Carl
    • [Amps] Another source for YC-156's   Bill, W6WRT
      • [Amps] Another source for YC-156's   James Colville
      • [Amps] Another source for YC-156's   Roger
• [Amps] L and C "meter"   Zeitler, Lane LT, FST-1
  • [Amps] L and C "meter"   Carl
    • [Amps] L and C "meter"   Peter Frenning [OZ1PIF]
  • [Amps] L and C "meter"   James Colville
    • [Amps] L and C "meter"   Bill, W6WRT
      • [Amps] L and C "meter"   Larry Benko
• [Amps] (no subject)   Jim Thomson
  • [Amps] (no subject)   Carl
    • [Amps] (no subject)   Bill, W6WRT
      • [Amps] (no subject)   Carl
  • [Amps] 'Radio Transmitters" by Stoke   Zeitler, Lane LT, FST-1
    • [Amps] 'Radio Transmitters" by Stoke   Alek Petkovic
      • [Amps] 'Radio Transmitters" by Stoke   Alex Eban
  • [Amps] (no subject)   Bill, W6WRT
  • [Amps] (no subject)   Bill, W6WRT
  • [Amps] (no subject)   Bill, W6WRT
• [Amps] Arnold howell contact info.   Jim Thomson
  • [Amps] Arnold howell contact info.   Carl
• [Amps] Ripple in B+ supply.   Jim Thomson
• [Amps] 'good engineering'   Jim Thomson
  • [Amps] 'good engineering'   Zeitler, Lane LT, FST-1
• [Amps] 'good engineering'   Jim Thomson
• [Amps] me not an idiot   Herzog
  • [Amps] me not an idiot   Dr. David Kirkby
    • [Amps] me not an idiot   Zeitler, Lane LT, FST-1
• [Amps] gg   Herzog
  • [Amps] gg   Mike
    • [Amps] gg   Carl
• [Amps] gg   TexasRF at aol.com
  • [Amps] gg   Carl
  • [Amps] gg   Bill, W6WRT
    • [Amps] gg   Roger
      • [Amps] gg   Carl
      • [Amps] gg   Roger
      • [Amps] gg   Hardy Landskov
      • [Amps] gg   Roger
      • [Amps] gg   Carl
      • [Amps] gg   Bill, W6WRT
      • [Amps] gg   James Colville
      • [Amps] gg   Bill, W6WRT
      • [Amps] gg   Paul Christensen
      • [Amps] gg   k7fm
      • [Amps] gg   Robert Morris
      • [Amps] gg   Bill VanAlstyne W5WVO
      • [Amps] gg   James Colville
      • [Amps] gg   Ron Youvan
      • [Amps] gg   Bill, W6WRT
      • [Amps] gg   Carl
      • [Amps] gg   Carl
      • [Amps] gg   Ken
    • [Amps] gg   Alex Eban
• [Amps] 'good engineering'   donroden at hiwaay.net
  • [Amps] 'good engineering'   James Colville
    • [Amps] 'good engineering'   James Colville
    • [Amps] 'good engineering'   donroden at hiwaay.net
      • [Amps] 'good engineering'   Zeitler, Lane LT, FST-1
      • [Amps] 'good engineering'   Roger
      • [Amps] 'good engineering'   Carl
      • [Amps] 'good engineering'   donroden at hiwaay.net
      • [Amps] 'good engineering'   Roger
      • [Amps] 'good engineering'   Carl
      • [Amps] 'good engineering'   Roger
• [Amps] 'good engineering'   donroden at hiwaay.net
  • [Amps] 'good engineering'   Carl
• [Amps] me not an idiot   Dave White
  • [Amps] me not an idiot   Alex Eban
    • [Amps] me not an idiot   Carl
      • [Amps] me not an idiot   Michael Tope
  • [Amps] me not an idiot   Doug Renwick
    • [Amps] me not an idiot   mikea
      • [Amps] me not an idiot   donroden at hiwaay.net
      • [Amps] me not an idiot   Alex Eban
  • [Amps] me not an idiot   donroden at hiwaay.net
    • [Amps] me not an idiot   Carl
  • [Amps] me not an idiot   Bill, W6WRT
• [Amps] Good engineering   Steve Thompson
  • [Amps] Good engineering   Roger
    • [Amps] Good engineering   Steve
      • [Amps] Good engineering   mikea
    • [Amps] Good engineering   mikea
  • [Amps] Good engineering   Jeff Blaine AC0C
    • [Amps] Good engineering   Steve
      • [Amps] Good engineering   Carl
      • [Amps] Good engineering   Roger
      • [Amps] Good engineering   Pete Smith
      • [Amps] Good engineering   mikea
      • [Amps] Good engineering...More Car Computer Horror Stories   Phil Clements
      • [Amps] Good engineering...More Car Computer Horror Stories   Rob Stampfli
      • [Amps] Good engineering...More Car Computer Horror Stories   Randall, Randy
      • [Amps] Good engineering...More Car Computer Horror Stories   Carl
      • [Amps] Good engineering...More Car Computer Horror Stories   Randall, Randy
      • [Amps] Good engineering...More Car Computer Horror Stories   Gary Smith
      • [Amps] Good engineering...More Car Computer Horror Stories   RICHARD SOLOMON
      • [Amps] Good engineering...More Car Computer Horror Stories   Sam Carpenter
      • [Amps] Good engineering...More Car Computer Horror Stories   Ron Youvan
      • [Amps] Good engineering...More Car Computer Horror Stories   RICHARD SOLOMON
      • [Amps] Good engineering...More Car Computer Horror Stories   Bill Fuqua
      • [Amps] Good engineering...More Car Computer Horror Stories   Roger
      • [Amps] Good engineering...More Car Computer Horror Stories   Randall, Randy
      • [Amps] Good engineering...More Car Computer Horror Stories   Bill VanAlstyne W5WVO
      • [Amps] Good engineering...More Car Computer Horror Stories   Roger
      • [Amps] Good engineering...More Car Computer Horror Stories   Carl
      • [Amps] Good engineering...More Car Computer Horror Stories   Roger
      • [Amps] Good engineering...More Car Computer Horror Stories   WA3GIN
      • [Amps] Good engineering...More Car Computer Horror Stories   n8de at thepoint.net
      • [Amps] Good engineering   Edward Swynar
      • [Amps] Good engineering   mikea
      • [Amps] Good engineering   Gary Smith
      • [Amps] Good engineering   Alex Eban
• [Amps] $1400 for an L4B? Yeah Right!   Patrick
  • [Amps] $1400 for an L4B? Yeah Right!   Jim Dawson
• [Amps] Knwd TL-922 bandswitch mod   Zeitler, Lane LT, FST-1
• [Amps] me not an idiot   Dave White
  • [Amps] me not an idiot   Peter Frenning [OZ1PIF]
    • [Amps] me not an idiot   Jan Erik Holm
      • [Amps] me not an idiot   Shon Edwards
    • [Amps] me not an idiot   Roger
  • [Amps] me not an idiot   Carl
  • [Amps] me not an idiot   donroden at hiwaay.net
• [Amps] 5514 triode   Zeitler, Lane LT, FST-1
  • [Amps] 5514 triode   Carl
• [Amps] Over 1.5k = Idiot?   Sam Carpenter
  • [Amps] Over 1.5k = Idiot?   Alex Eban
    • [Amps] Over 1.5k = Idiot?   Roger
• [Amps] me not an idiot   Gudguyham at aol.com
  • [Amps] me not an idiot   Michael Tope
• [Amps] me not an idiot   TexasRF at aol.com
• [Amps] gg   TexasRF at aol.com
• [Amps] me not an idiot   Dave White
• [Amps] Photo flash caps   Ron Youvan
• [Amps] Hipot testing vs RF breakdown   Larry Benko
• [Amps] Commander 2500 start problem   George (K8GG) & Marijke Guerin
• [Amps] [Fwd: Re: me not an idiot]   Herzog
• [Amps] Serious signals.   Herzog
  • [Amps] Serious signals.   Gary Smith
• [Amps] 'good engineering'   Roger
  • [Amps] 'good engineering'   Carl
• [Amps] YC156 operating parms for US amp build?   Jim Barber
  • [Amps] YC156 operating parms for US amp build?   Larry
    • [Amps] YC156 operating parms for US amp build?   Ian White GM3SEK
    • [Amps] YC156 operating parms for US amp build?   Gary Schafer
• [Amps] 3CX1200   Dan
• [Amps] coaxial stub on amplifier output   John Lyles
  • [Amps] coaxial stub on amplifier output   Stein Roar LA6FJA-K3RAG
  • [Amps] coaxial stub on amplifier output   donroden at hiwaay.net
  • [Amps] coaxial stub on amplifier output   Carl
• [Amps] 7-16 Din connectors'.   Jim Thomson
  • [Amps] 7-16 Din connectors'.   James Colville
  • [Amps] 7-16 Din connectors'.   Roger
• [Amps] unbuilt SB-220 on Ebay....   Patrick
  • [Amps] unbuilt SB-220 on Ebay....   Van K7VS
    • [Amps] unbuilt SB-220 on Ebay.... WHY?   chas
      • [Amps] unbuilt SB-220 on Ebay.... WHY?   Carl
      • [Amps] unbuilt SB-220 on Ebay.... WHY?   Jeff Blaine AC0C
      • [Amps] unbuilt SB-220 on Ebay.... WHY?   donroden at hiwaay.net
      • [Amps] unbuilt SB-220 on Ebay.... WHY?   RICHARD SOLOMON
      • [Amps] unbuilt SB-220 on Ebay.... WHY?   Hardy Landskov
      • [Amps] unbuilt SB-220 on Ebay.... WHY?   Roger
• [Amps] YC-156 vs 8877   Jim Thomson
• [Amps] LCR meter   Jim Thomson
  • [Amps] LCR meter   Jack/W6NF
    • [Amps] LCR meter   Vic K2VCO
      • [Amps] LCR meter   Larry Benko
      • [Amps] LCR meter   Carl
      • [Amps] LCR meter   Jack/W6NF
      • [Amps] LCR meter   Carl
• [Amps] 1/4 wave shorted stubs on amp output   Jim Thomson
• [Amps] coaxial stub on amplifier output   TexasRF at aol.com
• [Amps] WANTED -- Plate xfmr, SB-200 or similar   Vic K2VCO
• [Amps] HV supply filter caps value formula   Ryan Foster
• [Amps] 1/4 wave shorted stubs on amp output   John Lyles
• [Amps] Good engineering...More Car Computer Horror Stories   TexasRF at aol.com
  • [Amps] Good engineering...More Car Computer Horror Stories   Carl
• [Amps] Now this here is a real ham's amp!   Patrick
  • [Amps] Now this here is a real ham's amp!   Cecil Acuff
    • [Amps] Now this here is a real ham's amp!   Roger
  • [Amps] Now this here is a real ham's amp!   Charles Harpole
  • [Amps] Now this here is a real ham's amp!   Charles Harpole
  • [Amps] Now this here is a real ham's amp!   Pete Smith
    • [Amps] Now this here is a real ham's amp!   Roger
      • [Amps] Now this here is a real ham's amp!   Pete Smith
• [Amps] Radio Handbook...   Robert Briggs
• [Amps] gg feed through power   TexasRF at aol.com
  • [Amps] gg feed through power   Roger
  • [Amps] gg feed through power   Carl
    • [Amps] gg feed through power   Roger
      • [Amps] gg feed through power   Gary Schafer
• [Amps] unbuilt SB-220 GONE!   Van K7VS
  • [Amps] unbuilt SB-220 GONE!   Cecil Acuff
    • [Amps] unbuilt SB-220 GONE!   Hardy Landskov
      • [Amps] unbuilt SB-220 GONE!   Roger
      • [Amps] unbuilt SB-220 GONE!   WA3GIN
• [Amps] unbuilt SB-220 GONE!   N7KA at comcast.net
  • [Amps] unbuilt SB-220 GONE!   Jim Dawson
  • [Amps] unbuilt SB-220 GONE!   Roger
  • [Amps] unbuilt SB-220 GONE!   donroden at hiwaay.net
• [Amps] gg feedthru power   John Lyles
  • [Amps] gg feedthru power   Carl
• [Amps] Good engineering...More Car Computer Horror Stories   Dave White
  • [Amps] Good engineering...More Car Computer Horror Stories   d.cutter at ntlworld.com
  • [Amps] Good engineering...More Car Computer Horror Stories   donroden at hiwaay.net
• [Amps] Radio Handbook   Marv Gonsior
• [Amps] Orr Handbook   Marv Gonsior
  • [Amps] Orr Handbook   Edgar Brown
• [Amps] unbuilt SB-220 GONE!   Dave White
• [Amps] LCR meter.   Jim Thomson
  • [Amps] LCR meter.   Jeff Blaine AC0C
    • [Amps] LCR meter.   Ryan Foster
      • [Amps] LCR meter.   Carl
    • [Amps] LCR meter & measuring components   Larry
      • [Amps] LCR meter & measuring components   pfizenmayer
      • [Amps] LCR meter & measuring components   RICHARD SOLOMON
      • [Amps] LCR meter & measuring components   Cecil Acuff
    • [Amps] LCR meter.   Alex Eban
  • [Amps] LCR meter.   Bill, W6WRT
• [Amps] Now this here is a real ham's amp!   Patrick
• [Amps] HOMEBREW AMP HDW   N7KA at comcast.net
  • [Amps] HOMEBREW AMP HDW   Bill, W6WRT
• [Amps] UNBUILT SB 220 SOLD...I CANNOT TELL A LIE!   Van K7VS
  • [Amps] UNBUILT SB 220 SOLD...I CANNOT TELL A LIE!   Bill Fuqua
    • [Amps] UNBUILT SB 220 SOLD...I CANNOT TELL A LIE!   Jeff Blaine AC0C
  • [Amps] UNBUILT SB 220 SOLD...I CANNOT TELL A LIE!   Roger
    • [Amps] UNBUILT SB 220 SOLD...I CANNOT TELL A LIE!   Carl
• [Amps] Semtech SA1388?   Mike
  • [Amps] Semtech SA1388?   Paul Christensen
    • [Amps] Semtech SA1388?   Carl
    • [Amps] Semtech SA1388?   la7sl Nils Petter
  • [Amps] Semtech SA1388?   Steve Katz
    • [Amps] Semtech SA1388?   la7sl Nils Petter
      • [Amps] Semtech SA1388?   Steve Katz
      • [Amps] Semtech SA1388?   la7sl Nils Petter
  • [Amps] Semtech SA1388?   Mike
• [Amps] UNBUILT SB 220 SOLD...I CANNOT TELL A LIE!   Dave White
  • [Amps] UNBUILT SB 220 SOLD...I CANNOT TELL A LIE!   Jim Barber
• [Amps] LCR meter.   Dave White
• [Amps] LCR meter   James Irving
• [Amps] UNBUILT SB 220 SOLD...I CANNOT TELL A LIE!   Jim Barber
  • [Amps] UNBUILT SB 220 SOLD...I CANNOT TELL A LIE!   Roger
    • [Amps] UNBUILT SB 220 SOLD...I CANNOT TELL A LIE!   Jeff
• [Amps] UNBUILT SB 220 SOLD...I CANNOT TELL A LIE!   Carl
  • [Amps] UNBUILT SB 220 SOLD...I CANNOT TELL A LIE!   Roger
• [Amps] TX site RFI and automobiles   John Lyles
  • [Amps] TX site RFI and automobiles   la7sl Nils Petter
• [Amps] Amps Digest, Vol 87, Issue 117   John Lyles
  • [Amps] Amps Digest, Vol 87, Issue 117   Carl
• [Amps] Class F PA circuit tricks to improve efficiency   John Lyles
• [Amps] real component measurements at RF   John Lyles
  • [Amps] real component measurements at RF   Carl
• [Amps] help with decision on ncl-2000   jim feldman
  • [Amps] help with decision on ncl-2000   Carl

Last message date: Wed Mar 31 23:32:42 PDT 2010
Archived on: Wed Mar 31 23:32:56 PDT 2010

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...